Resumo do conteúdo contido na página número 2
About trademarks and registered trademarks Abbreviations ® ® ® ® z Microsoft , Windows , Windows 7, and Internet Explorer are registered The following abbreviations are used in this manual. ® ® trademarks or trademarks of Microsoft Corporation in the United States, z Microsoft Windows 7 Professional SP1 32/64-bit is referred to as Japan, and/or other countries. “Windows 7”. ® ® TM ® ® z Intel and Intel Core are trademarks or registered trademarks of Intel z Microsoft Windows XP Professional SP3
Resumo do conteúdo contido na página número 3
Contents How to turn on and off the power of the remote cameras . . . . . . .4 . . Checking alarm information . . . . . . . . . . . . . . . . . . . . . . . 40 . . . . . . . . . How to turn on the power of the remote cameras . . . . . . . . . . . . . . . . 4 Displaying alarm information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 How to turn off the power of the remote cameras . . . . . . . . . . . . . . . . 5 Returning the unit to the factory default state (INITIALIZE) .
Resumo do conteúdo contido na página número 4
How to turn on and off the power of the remote cameras Turning on the power of the cameras simultaneously How to turn on the power of the remote with the turning on of the unit’s power cameras 1 . Set the MENU button to ON . The power of the remote cameras in the standby state can be be turned on from the unit. There are the following methods of turning on the power. 2 . Open CAMERA SETUP menu [24] . z Turning on the power one camera at a time z Turning on the power of the cameras simultane
Resumo do conteúdo contido na página número 5
How to turn on and off the power of the remote cameras (continued) Turning off the power of multiple cameras How to turn off the power of the remote cameras 1 . Set the MENU button to ON . The power of the remote cameras can be be turned off from the unit. There are the following methods of turning off the power. 2 . Open CAMERA SETUP menu [24] . z Turning off the power one camera at a time z Turning off the power of multiple cameras Turning off the power of all the cameras 3 . Turn the F1
Resumo do conteúdo contido na página número 6
Making image adjustments for the selected remote camera The following settings and adjustments can be made for the selected remote camera directly from this unit. z Gain z White balance z Detail z Pedestal z Black balance z Shutter speed z R and B gain z Color bar selection z Shooting mode selection z R and B pedestal The dedicated buttons and dials in the color adjustment section can be used for the gain, pedestal, R and B gain, R and B pedestal, white balance, black balance, color bar selecti
Resumo do conteúdo contido na página número 7
Making image adjustments for the selected remote camera (continued) Setting the gain Setting the white balance In places which are too dark, increase the gain level, and in places Adjust the ratio between R, G, and B (the three primary colors) so that which are too bright, reduce the gain level. white will be reproduced accurately. When the gain is increased, the noise level also increases. When the white balance is off, not only will white be reproduced poorly but the color tone of the entire
Resumo do conteúdo contido na página número 8
Making image adjustments for the selected remote camera (continued) Manually adjusting the white balance (R and B gain Setting the black balance settings) The black balance needs to be adjusted when using a remote camera 1 . for the first time or when a remote camera has not been used for a As with the automatic adjustment, fill the screen with a prolonged period of time. It also needs to be adjusted when significant white subject . changes have occurred in the ambient temperature or at the
Resumo do conteúdo contido na página número 9
Making image adjustments for the selected remote camera (continued) Selecting the color bars Adjusting the shutter speed Press the BARS button to output color bar signals from the remote The shutter mode and shutter speed of a remote camera can be camera. selected. 1 . Press the MENU button to turn on its indicator . Button indicator on : Outputs the color bar signal Button indicator off : Outputs the signal for the images shot by the camera 2 . Open SHUTTER menu [21] . Setting the shutter m
Resumo do conteúdo contido na página número 10
Making image adjustments for the selected remote camera (continued) Setting the shooting mode (SCENE 1 to SCENE 4) Change the shooting mode (scene file) of the remote camera to match the shooting conditions. Use the SCENE 1 to SCENE 4 buttons to change the shooting mode. SCENE 3 button SHIFT button SCENE 1 button SCENE 2 button SCENE 4 button 1 . Press the SHIFT button to turn on its indicator . 2 . Press one of the SCENE 1 to SCENE 4 buttons . The indicator of the selected button turns on and
Resumo do conteúdo contido na página número 11
Making image adjustments for the selected remote camera (continued) Selecting an ND filter with the USER buttons (USER 1 Setting an ND filter to USER 8) The ND filter setting can be configured when the selected remote camera uses a lens with an ND filter function. The ND filter settings “ND1” to “ND4” can be assigned to the USER buttons (USER 1 to USER 8) to enable selection with the buttons. 1 . ⇒ “Assigning functions to the USER buttons” (page 30) Press the MENU button to turn on its indica
Resumo do conteúdo contido na página número 12
Operating the osd menu of a remote camera To set the advanced settings of a remote camera, operate the menu superimposed on the image output of the remote camera (this menu is referred to as the OSD menu in this manual). The OSD menu of a connected remote camera can be operated from the unit. CAMERA OSD button F1 dial EXIT button F2 dial 1 . Hold down the CAMERA OSD button to turn on its indicator . The OSD menu appears on the selected remote camera and becomes able to be operated from the uni
Resumo do conteúdo contido na página número 13
Operating preset memory (PMEM) z Changing pages The preset memory of a remote camera can be operated from the unit. The following settings that you have adjusted in advance can be stored Press one of the number buttons [1] to [50] to directly select any of the in preset memory. 50 preset memory. Furthermore, pressing the PMEM PAGE button to change pages allows z Pan/tilt positions z Lens iris settings (manual iris only) you to operate up to 100 preset memory for each camera. z Zoom positions
Resumo do conteúdo contido na página número 14
Operating preset memory (PMEM) (continued) Registering preset memory (STORE) Recalling preset memory (RECALL) 1 . 1 . Press one of the camera selection buttons Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated . remote camera to be operated . 2 . 2 . Output the images to be shot to the monitor . Press the PMEM button to turn on its indicator . 3 . 3 . Press the PMEM button to turn on i
Resumo do conteúdo contido na página número 15
Operating preset memory (PMEM) (continued) Setting the operation items for when preset Registering the speed at which to move memory is recalled (PRESET SCOPE) to the position set in the preset memory (PRESET SPEED) You can select whether to recall all or only some of the settings registered to preset memory. The unit registers the speed (PRESET SPEED) at which to move to the set position when preset memory is recalled to each preset number. When a preset is recalled, the unit sets PRESET SP
Resumo do conteúdo contido na página número 16
Operating preset memory groups (PMEM GROUP) The unit allows you register up to four “preset memory groups” created Creating preset memory groups by selecting one preset memory for each of multiple remote cameras. Pressing any of the PM GRP 1 to PM GRP 4 buttons simultaneously recalls all preset memory registered to the corresponding preset memory group. Registering the preset memory to recall when in The following setting procedures use the example of setting PMEM SEPARATE mode GROUP1 but t
Resumo do conteúdo contido na página número 17
Operating preset memory groups (PMEM GROUP) (continued) Registering the preset memory to recall when in ALL Recalling preset memory groups mode 1 . Press the MENU button to turn on its indicator . Pressing a button to recall a preset memory group Use PM GRP 1 to PM GRP 4 to recall preset memory groups. 2 . Open PM GRP1 menu [31] . PM GRP 1 to PM GRP 4 buttons USER ENABLE button 1.PM GRP1 MODE ALL 3 . Turn the F1 dial to display the “12 . PM GRP1ALL” item . 12.PM GRP1 ALL
Resumo do conteúdo contido na página número 18
Operating tracing memory (TMEM) The unit incorporates tracing memory (TMEM) for recording a series of Registering tracing memory (STORE) operations that were performed for a connected remote camera. This feature allows you to duplicate the recorded operations of a remote 1 . Press one of the camera selection buttons camera. [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated . Recording target Camera numbers CAM1 to CAM10 Functions that Pan, tilt, zoom,
Resumo do conteúdo contido na página número 19
Operating tracing memory (TMEM) (continued) 7 . Press START button [11] . Recalling tracing memory (RECALL) The indicator of START button [11] turns on. (Operation wait state) TM05: 1 . Press one of the camera selection buttons Waiting Opr. [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated . 8 . Operate one of the PAN/TILT lever, ZOOM button, 2 . Press the TMEM button to turn on its indicator . FOCUS dial, IRIS dial, and white balance mode selection The tracing memo
Resumo do conteúdo contido na página número 20
Operating tracing memory (TMEM) (continued) Deleting tracing memory (DELETE) Restoring tracing memory (RESTORE) 1 . 1 . Press one of the camera selection buttons Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated . remote camera to be controlled from the unit . 2 . 2 . Press the TMEM button to turn on its indicator . Output the images to be shot to the monitor . The tracing memory status
