Manual do usuário Radio Shack Auvio 40-289

Resumo do conteúdo contido na página número 1

TM
THE PERFORMANCE YOU NEED
40 W 2-Way In-Ceiling Speaker
Please read this user’s guide before using your new
speaker.
User’s Guide 40-289
© 2009. Ignition L. P. All rights reserved. Auvio is a trademark used by Ignition L.P.
Package and insert are recyclable. Insert contains recycled material.

Resumo do conteúdo contido na página número 2

Package contents  Speaker  Template/paint mask  User’s Guide  Quick Start Features  High quality speaker works well with any speaker system.  Speaker frame and grille can be painted to blend in with any ceiling. 1 Installing the Speaker Prepare the Location To mount your speaker, you need the following items (not supplied)  Drywall or keyhole saw  Wire stripper  Phillips screwdriver  Pencil or marker  18-20 gauge speaker wire Be sure the mounting surface is: 3  between /8 inch and

Resumo do conteúdo contido na página número 3

1. Remove the inner cardboard disc from the supplied template/paint mask and keep it for later. Use the outer portion of the mask as a template to mark the cutout Template hole size and location for mounting the speaker. . Use a drywall or keyhole saw to cut the hole. (Optional) Painting the Grille nNote: Do not paint internal speaker components. We recommend you spray-paint the grille so no paint gets in or blocks the holes. 1. To remove the grille, insert a paper clip into one of t

Resumo do conteúdo contido na página número 4

1/4’’ 2 Connecting speaker wires Connect the cable leads from the outputs on your amplifier to the input terminal posts on the rear of your loudspeaker cabinet. We recommend you use wire that is color-coded or otherwise marked on to help you connect the wire correctly. 1. Route the speaker wire to the speaker from the amplifier. . Separate about 4 inches of speaker wire at each end. . Using a wire stripper, remove about ¼ inch of insulation from each wire and twist the exposed ends. .

Resumo do conteúdo contido na página número 5

. Connect the wire from the red speaker terminal to the amplifier’s positive (+) terminal, then connect the wire from the black speaker terminal to the amplifier’s negative (–) terminal. n Notes:  Avoid routing the speaker wire near electrical wires.  Do not nail, staple, or otherwise puncture the speaker wire.  Before connecting your speaker to an amplifier, make sure the amplifier and all associated equipment is turned off.  Make sure the impedance of the amplifier matches with the

Resumo do conteúdo contido na página número 6

nNote: When removing the speaker from the wall or ceiling, loosen the screws just enough to remove the speaker. This will prevent loss of the mounting tabs behind your wall. Maintenance  Keep the amplifier’s volume at the low position when you first turn it on to avoid damaging the speaker.  Do not use overrating power, otherwise sound quality can be destroyed and loudspeaker drivers can be damaged.  Clean your speaker with a soft cloth to avoid damaging your loudspeaker. Specification

Resumo do conteúdo contido na página número 7

Limited Warranty Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current;

Resumo do conteúdo contido na página número 8

Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.