Manual do usuário Mackie ART300

Resumo do conteúdo contido na página número 1

ART300
Art Series
Two-Way Speaker System
 The same careful acoustic design and advanced
materials used in the ART active speakers have been
utilized in the ART300 passive speaker. Combining
high efficiency, high power handling and excellent
sonic performance, the ART300 provides practical
solutions for permanent installation applications.
 The two-way design consists of a 12" woofer that
uses a massive magnet structure for accurate bass
reproduction and a CD horn loaded to a 1" exit
compression

Resumo do conteúdo contido na página número 2

ART300 Two-Way Speaker System Specifications System Acoustic Frequency Range (–10 dB): 60Hz–19kHz Frequency Response (–3 dB): 195Hz–17kHz Horz. Coverage Angle (–6 dB): 80°, averaged 1kHz to 10kHz Vert. Coverage Angle (–6 dB): 75°, averaged 1kHz to 10kHz Directivity Factor; Q(DI): 10.0 (10), averaged 1kHz to 10kHz 1 System Sensitivity : 101dB 1W @ 1m 2 Rated Maximum Peak : 132dB @ 1m 2 System Input Power Rating : 300W, RMS; 1200W Peak 3 Recommended Amplifier : 450W System Nominal Impedance: 8Ω H

Resumo do conteúdo contido na página número 3

ART300 Two-Way Speaker System ART300 Vertical Polars 500Hz 200Hz 630Hz 250Hz 0˚ 0˚ 800Hz 315Hz 1kHz 400Hz 1.25kHz 3.15kHz 1.6kHz 4kHz 0˚ 0˚ 2kHz 5kHz 2.5kHz 6.3kHz Vertical Off-Axis Frequency Response (UP) 8kHz 10kHz 0˚ 12.5kHz Vertical Off-Axis Frequency Response (DOWN) 16kHz OF 6 PAGES oF 6 PAGES 3

Resumo do conteúdo contido na página número 4

ART300 Horizontal Polars 0˚ 0˚ 200Hz 500Hz 250Hz 630Hz 315Hz 800Hz 400Hz 1kHz 0˚ 0˚ 3.15kHz 1.25kHz 4kHz 1.6kHz 5kHz 2kHz 6.3kHz 2.5kHz Horizontal Off-Axis Frequency Response 0˚ 8kHz 10kHz 12.5kHz 16kHz OF 6 PAGES oF 6 PAGES 4

Resumo do conteúdo contido na página número 5

Two-Way Speaker System ART300 Frequency response is measured on-axis at a distance referenced back to 1m at 1-watt drive. Shown as a half space (2π) environment. Beamwidth vs. Frequency Directivity Index 12.29" (312mm) 8.35" (212mm) 14.22" (361mm) 14.18" (360mm) 7.44" (189mm) 3.58" (91mm) 10.20" (259mm) 7.36" (187mm) 12.29" (312mm) BOTTOM SIDE 15.36" (390mm) 6.69" (170mm) 15.36" (390mm) 8.67" (220.0mm) 16.98" (431mm) 6.25" 24

Resumo do conteúdo contido na página número 6

ART300 Two-Way Speaker System Architects’ and Engineers’ Specifications The loudspeaker shall be a self-contained unit, housed in a vented, reinforced polypropylene enclosure and consisting of: (1) a 12 inch low-frequency, cone driver, (2) a 80° x75°, high-frequency, constant-directivity polynomial horn and horn-loaded, 1 inch compression driver, (3) passive crossover network. The drivers shall be crossed over at 1.8kHz by a 2-pole, passive network that contains equalization for the constant dire