Manual do usuário Infinity Systems Inc.TSS-SAT800

Resumo do conteúdo contido na página número 1

TSS-SAT800 OM 2/17/06 12:20 PM Page 1
TOTAL SPEAKER SOLUTIONS
TSS-SAT800
Owner’s Guide

Resumo do conteúdo contido na página número 2

TSS-SAT800 OM 2/17/06 12:20 PM Page 2 TSS-SAT800 OWNER’S GUIDE Table of Contents 3 Introduction 3 Included 3 Planning Your System 3 Placement 4 Wall-Mounting the Satellites 6 Connections 6 Maintenance and Service 7 Specifications 2 TSS-SAT800

Resumo do conteúdo contido na página número 3

TSS-SAT800 OM 2/17/06 12:20 PM Page 3 INTRODUCTION PLACEMENT ™ NOTE: The TSS-SAT800 can be placed directly on a shelf, Infinity Total Solutions or mounted on a wall using the included wall bracket. Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our high-quality drivers, precision As Left and Right Front Channels dividing networks and rigid, well-braced enclosures combine to deliver For left and right front channels, place one satellite t

Resumo do conteúdo contido na página número 4

® TSS-SAT800 OM 2/17/06 12:20 PM Page 4 Adjustable Wall Bracket Using the Satellite on the Shelf Stand Step 1. Mark the positions on the wall where you would like to To attach the satellite to the shelf stand, hold the satellite on top place the mounting screws. of the stand and insert the two included screws through the rear of the stand and into the rear of the speaker. Step 2. Place the bracket against the wall and fasten four 1-1/2" #10 wood screws through the bracket’s screw holes into t

Resumo do conteúdo contido na página número 5

TSS-SAT800 OM 2/17/06 12:20 PM Page 5 ® Step 4. Screw the ball and shaft assembly (B) to the lower 1/4"- 20 insert on the rear of the satellite. Back out 1/2 of a turn and tighten the nut against the speaker. Step 5. Attach the speaker wire as shown on page 6. Step 6. Drop round collar (C) over ball and shaft assembly (B) that is mounted to the speaker with the finished side of the collar facing the rear of the speaker. Step 7. Carefully push the ball straight into the socket mounted on the w

Resumo do conteúdo contido na página número 6

TSS-SAT800 OM 2/17/06 12:20 PM Page 6 CONNECTIONS MAINTENANCE AND SERVICE After placing the speakers, you are ready to connect your system. The TSS-SAT800 enclosure may be cleaned using a soft cloth to First, turn off all audio-system power. Use high-quality speaker remove fingerprints or to wipe off dust. wire to make your connections; #18-gauge speaker wire with All wiring connections should be inspected and cleaned or polarity coding is recommended. For longer distances, #16- remade period

Resumo do conteúdo contido na página número 7

TSS-SAT800 OM 2/17/06 12:20 PM Page 7 SPECIFICATIONS TSS-SAT800 Frequency Range: 120Hz – 30,000Hz (±3dB) Recommended Amplifier Power Range: 10 – 100 Watts Sensitivity: 88dB (2.83V @ 1 meter) Nominal Impedance: 8Ω Crossover Frequency: 3.5kHz; 12dB/octave ® Midrange Driver(s): 3-1/2" (64mm) MMD magnetically shielded High-Frequency Driver: 3/4" (19mm) MMD magnetically shielded Dimensions (H x W x D): 9-1/8" x 3-3/4" x 2-3/4" (232mm x 95mm x 70mm) Weight: 2.5 lb (1.1kg) Infinity continually stri

Resumo do conteúdo contido na página número 8

TSS-SAT800 OM 2/17/06 12:20 PM Page b © 2006 Harman International Industries, Incorporated.All rights reserved. Infinity Systems, 250 Crossways Park Drive,Woodbury, NY 11797 USA www.infinitysystems.com Infinity and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Total Solutions is a trademark of Harman International Industries, Incorporated. Dolby and Pro Logic are registered trademarks of Dolby L