Manual do usuário AudioSource AC Series 2-Way In-WallSystem

Resumo do conteúdo contido na página número 1

AC5W/AC6W/AC8W
5“/6.5”/8” 2-Way In-Wall Speakers
Congratulations on your purchase of the
AudioSource AC Series In-Wall Speaker System.
This product is designed to reproduce the audio
portion of your home entertainment environment
with accuracy and detail that will satisfy the most
discriminating listener.
Please read this Installation Manual to ensure the
proper installation and performance of your AC
Series speakers.
Preparing for your Installation
Gather the necessary tools for your i

Resumo do conteúdo contido na página número 2

After selecting the mounting location, mark the hole to Grill Removal for Installation be cut out. A template is provided in the speaker box. Locate and level the template, then mark with pencil on CAUTION! The grill is held in place by contact pressure the wall surface. If you are unsure whether there are around the edges where it attaches to the speaker frame. obstructions behind the wall surface where the speakers To avoid difficulty reinstalling the grill, care should be are to be mounted

Resumo do conteúdo contido na página número 3

Next make sure that the clamps are positioned inside Painting the Speaker the frame of the speaker. Two paint shields are included in each AC Series speaker package. Place the paint shield inside the frame to protect the speakers. You can now safely Incorrect paint the speaker frames to match your wall surface if you desire. When painting the grill caution should be taken to ensure that paint does not clog or congest the perforated openings in the grill. This would prevent proper op

Resumo do conteúdo contido na página número 4

Woofer 5.25” Carbon Filled Poly Cone with Butyl Rubber Surround Tweeter Pivoting 25mm Elastomer Deposited Silk Frequency Response 40Hz to 20kHz Impedance 8 ohm AC5W Sensitivity 89dB, 2.83v @ 1m Specifications Power Capacity 10 to 150 Watts Outer Dimension 7.50” x 11“ (191mm x 278mm) Cut Out Dimension 6.25” x 9.70”(159mm x 246mm) Mounting depth 2.50” (64mm) New Construction Bracket Order Part Number: BI5 Woofer 6.5” Carbon Filled Poly Cone with Butyl Rubber Surround Tweeter Pivoting 25mm Elasto