Resumo do conteúdo contido na página número 1
HP ProLiant MicroServer
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 615717-006
December 2012
Edition: 6
Resumo do conteúdo contido na página número 2
© Copyright 2010, 2012 Hewlet -Ptackard Development Company, L.P . The information contained heeirn is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an ad d wia tio rrnaanlty. HP shall not be liable for technical or editorial errors or omissions contained h erein. Microsoft®, Windows®, and Windows Server® are U.S. regi
Resumo do conteúdo contido na página número 3
Contents Operations ................................................................................................................................... 6 Power up the server ................................................................................................................................... 6 Power down the server ............................................................................................................................... 6 Open the panel doo ...............
Resumo do conteúdo contido na página número 4
Subscriber's choice ........................................................................................................................ 33 Embedded SATA RAID featur e.................................................................................................................. 33 Configuring the SATA RAID featu .................................................................................................. re 33 Enabling the SATA RAID feature in RBS ...............................
Resumo do conteúdo contido na página número 5
Federal Communications Commission notic ............................................................................................... e 74 FCC rating labe ............................................................................................................................ l 74 FCC Notice, Class A Equipmen ...................................................................................................... t 74 FCC Notice, Class B Equipmen ..........................................
Resumo do conteúdo contido na página número 6
Operations Power up the server To power up the server, press the Power On/Standby bu tton. Power down the server WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the pouw ppl ery s and some internal circuitry remain active until AC power is remov ed. IMPORTANT: If installing a h-potl
Resumo do conteúdo contido na página número 7
4. Open the panel door of the serv er. For server-specific information, see the installation sheet that ships with the se rver. Operations 7
Resumo do conteúdo contido na página número 8
Setup Optional installation services Delivered by experienced, certified engineers, HP Care Pack services help you keep your servers up and running with support packages tailored specifically for HP ProLiant systems. HP Care Packs let you integrate both hardware and software support into a single packag A n e.umber of service level options are available to meet your needs. HP Care Pack Services offer upgraded service levels to expand the standard product warranty with easy-to-buy, easy
Resumo do conteúdo contido na página número 9
(code for Protection of Electronic Computer/Data Processing Equipment). For electrical power ratings on options, refer to the product rating label or the user documentation supplied with that o ption. WARNING: To reduce the risk of personal injury, fire, or damage to the equipment, do not overload the AC supply branch circuit that provides power to the rack. Consult the electrical authority having jurisdiction over wiring and installation requiremse of y nt our facility . CAUTIO
Resumo do conteúdo contido na página número 10
Installing the operating system For the latest information on supported operating systems, see the HP w ebsite (http://www.hp.com/go/supportos). To install an operating system on the server, insert the operating system DVD into the RO DVD M dr- ive (optional) and then reboot the server. The updates are available on the HP w ebsite (http://www.hp.com/support). To begin the installation process, follow the on -screen instructions . Registering the server To register the server, see the H
Resumo do conteúdo contido na página número 11
Hardware options installation Introduction If more than one option is being installed, read the installation instructions for all the hardware options and identify similar steps to streamline the installation proce ss. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching the m. CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installa
Resumo do conteúdo contido na página número 12
Removal and replacement tools In performing any hardware configuration procedures, you might need the following it ems: • System screwdriver (secured to the front panel do or) All hardware screws used in the server can be removed or fastened by using the system scre. w driver • Spare screws, located on the back side of the front panel do or. The following references and software tools might also be used : • IPMI Event Log • Diagnostics software Server warnings and caution s WARNING:
Resumo do conteúdo contido na página número 13
IMPORTANT: Before removing any serviceable parts, determine whether the part is hot plug or non-hot plug. If the device is n-hon ot plug, you must power down the server. N -ho on t plug devices in the server include the processor, all boards, memory modules, fan, ex siopna bo n ards, and all system drives. IMPORTANT: Review the specifications of a new component before installing it to verify that it is compatible with the server. When you integrate new components into the syst
Resumo do conteúdo contido na página número 14
The password is encrypted and stored in flash memory. If you update the firmware, all data, passwords and configurations are reset to defau lt. The MicroServer Remote Access Card supports following character ateg cories: • Uppercase letters: A, B, C • Lowercase letters: a, b, c • Numbers: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 • Symbol (Special characters): ` ~ @ # $ % & * ( + ) _ = { } [ - ] |\ : ; " ‘ < > , . ? / SATA drive options For more information about product feature ssp,ecifications
Resumo do conteúdo contido na página número 15
5. Remove four spare drive screws from the rear side of the panel d oor. 6. Install the drive in the drive carri er: a. Align the drive inside the carrie r. b. Use the screws to secure the drive in the car rier. 7. Install the drive in the drive bay : a. Slide the drive assembly into the drive bay . Hardware options installation 15
Resumo do conteúdo contido na página número 16
b. Close the ejector lever to secure the dr ive. 8. Close the panel doo r. 9. Use the HP ProLiant MicroServer key to lock the panel d oor. Optical disc drive For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the HP Product Bulletin web (shttp ite ://www.hp.com/go/productbulletin). The removable media drive bay supports an optical drive, a tape drive or an RDX drive. The section describes how to install
Resumo do conteúdo contido na página número 17
5. Slide the top panel forward, and then lift it to release it from the c hassis. 6. Use a screwdriver to toggle the metal faceplate off the top p anel. The metal faceplate is no longer needed when the removable media driyv i e b s o accupied. 7. Install the optical drive : Hardware options installation 17
Resumo do conteúdo contido na página número 18
a. Remove four spare drive screws from the rear side of the panel d oor. b. Install the screws onto the driv e. c. Slide the drive into the media drive bay until it clicks into p lace. 8. Connect the optical drive cable s: a. Connect the data cable to the optical drive, and then connect the end to the system boa rd (J24). Hardware options installation 18
Resumo do conteúdo contido na página número 19
b. Connect the power cable to the optical drive, and then connect the other end to the power supply unit optical drive power connector (P6) . 9. Slide the top pane black onto the chassis . 10. Tighten the rear thumbscrew to lock the top panel in p lace. 11. Close the panel doo r. Hardware options installation 19
Resumo do conteúdo contido na página número 20
12. Use the HP ProLiant MicroServer key to lock the panel d oor. RDX drive option For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the HP Product Bulletin web (shttp ite ://www.hp.com/go/productbulletin). To install the component : 1. Power down the serve (ron page 6). 2. Place the server on a flat, level work surfa ce. 3. Open the panel doo (ron page 6). 4. Loosen the rear thumbscrew that locks the
