Resumo do conteúdo contido na página número 1
SD8362E SD8362E
20x Zoom • 2MP • Full HD • WDR Pro
Rev. 1.1
Resumo do conteúdo contido na página número 2
VIVOTEK Table of Contents Revision History ......................................................................................................................................3 Overview 4 Read Before Use ...................................................
Resumo do conteúdo contido na página número 3
VIVOTEK Local storage > Content management ............................................................................................................... 110 Appendix 112 URL Commands for the Network Camera .......................................................................................................... 112 Technical Specif
Resumo do conteúdo contido na página número 4
VIVOTEK Overview VIVOTEK SD8362E is a high performance day/night speed dome network cameras suitable for professional outdoor surveillance applications. The IP66-rated housing protects the camera body against rain and dust and the wide temperature range ensures operation under extreme weather conditions. It is especially suitable for monitoring wide open indoor/outdoor spaces such as airports, highways, and parking lots where high-level reliability and precision are always required. The S
Resumo do conteúdo contido na página número 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the Package Contents listed below. Take note of the
Resumo do conteúdo contido na página número 6
GND D13 D12 D11 VIVOTEK Physical Description SD Card Slot Status LEDs Reset Button Lens GND DO2- DO1- DO+ General I/O Terminal Block GND D13 D12 D11 Ethernet 10/100 RJ45 Plug Audio Out (green) Microphone In (pink) Power Cord Socket (black) Ground 6 - User's Manual GND DO2- DO1- DO+
Resumo do conteúdo contido na página número 7
VIVOTEK Status LED Item LED status Description 1 Steady red Power on and system booting Red LED off Power off 2 Steady red & Green blinking every 1 sec. Network normal (heartbeat) Steady red & Green LED off Network failed 3 Steady red & Green LED blilnking every 2 sec. Audio mute (heartbeat) 4 Red blinking every 0.15 sec. & Green blinking Upgrading firmware every 1 sec. 5 Red blinking every 0.15 sec. & Green blinking Restoring default every 0.15 sec. Hardware Reset The reset button is used to
Resumo do conteúdo contido na página número 8
Silica gel Silica gel VIVOTEK Installation Hardware Installation Mounting the Network Camera 1. Attach the alignment sticker to the wall. 2. Drill four pilot holes into the wall. 3. Attach the smoked dome cover to the Network Camera using the supplied four black screws. 4. Stick the supplied two pieces of silica gel symmetrically to the inner side of the dome cover. Then place the metal ring into the dome cover to fix the silica gel. 5. Fix the dome cover to the Network Camera and secur
Resumo do conteúdo contido na página número 9
GND D13 D12 D11 PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK General Connection (without PoE) 1. If you have external devices such as sensors and alarms, connect them to the general I/O terminal block. GND: Ground 2. Use the supplied RJ45 female/female coupler DO2: Digital Output 2 GND DO2- to connect the Network Camera to a switch. DO1- DO1: Digital Output 1 DO+ Use Category 5 Cross Cable when Network DO+: Digital Outupt (DC12
Resumo do conteúdo contido na página número 10
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet. The first way is to set up the Network Camera behind a router. The second way is to utilize a static IP. The third way is to use PPPoE. Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below. 1. Connect your Net
Resumo do conteúdo contido na página número 11
VIVOTEK Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera. Please refer to LAN on page 49 for details. Internet connection via PPPoE (Point-to-Point over Ethernet) Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 49 for details. User's Manual - 11
Resumo do conteúdo contido na página número 12
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. IW 2 1. Install IW2 under the Software Utility directory from the software CD. Installation Double click the IW2 shortcut on your desktop to launch the program. Wizard 2 2. The program will conduct an analysis of your network environment. After your network environment is analyzed, please click Next to continue the program. 3.
Resumo do conteúdo contido na página número 13
VIVOTEK Ready to Use 1. A browser session with the Network Camera should prompt as shown below. 2. You should be able to see live video from your camera. You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras. For its installation details, please refer to its related documents. IMPORTANT! • Currently the Network Camera utilizes 32-bit ActiveX plugin You CAN NOT open a management/view session with the camera using a 64-bit
Resumo do conteúdo contido na página número 14
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1. Launch your web browser (e.g., Microsoft Internet Explorer, Mozilla Firefox, or Netscape). 2. Enter the IP addr
Resumo do conteúdo contido na página número 15
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 38. ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser. 1. Choose Tools > Internet Options > Security > Custom Level. ® 2. Loo
Resumo do conteúdo contido na página número 16
VIVOTEK Using RTSP Players To view the H.264/MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming. Quick Time Player Real Player VLC media player 1. Launch the RTSP player. 2. Choose File > Open URL. An URL dialog box will pop up. mpegable Player 3. The address format is rtsp://:/ As most ISPs and
Resumo do conteúdo contido na página número 17
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 10. To utilize this feature, please check the following settings on your Network Camera: 1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
Resumo do conteúdo contido na página número 18
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software; then launch the program to add the Network Camera to the Channel list. For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it from http://www.vivotek.com. 18 - User's Manual
Resumo do conteúdo contido na página número 19
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, Configuration Area, and Live Video Window. VIVOTEK INC. Resize Buttons Host Name Logo Camera Control Area Hide Button Configuration Area Live View Window VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website. Host Name The host name can be customized to fit your needs. For more information, please refer to System on page
Resumo do conteúdo contido na página número 20
VIVOTEK Pan: Click this button to start the auto pan (360° continuous rotation). Stop: Click this button to stop the Auto Pan and Auto Patrol functions. Patrol: Once the Administrator has determined the list of preset positions, click this button to command the camera to patrol among those positions on the Patrol List. The Network Camera will patrol continuously. For more information, please refer to Camera Control on page 65. Pan /Tilt /Zoom /Focus speed: Adjust the speed of Pan/ Tilt/ Zoo
