Resumo do conteúdo contido na página número 1
Outdoor Cube
IP8336W Network Camera
User’s Manual
1MP • Day & Night • Weather-proof • 802.11n WLAN
Rev. 1.0
Resumo do conteúdo contido na página número 2
VIVOTEK Table of Contents Overview ����������������������������������������������������������������������������������������������������������������������������������������������������� 4 Revision History �������������������������������������������������������������������������������������������������������������������������������������� 4 Read Before Use ����������������������������������������������������
Resumo do conteúdo contido na página número 3
VIVOTEK URL Commands for the Network Camera ������������������������������������������������������������������������������������������������ 119 Technical Specifications ��������������������������������������������������������������������������������������������������������������������������� 200 Technology License Notice �������������������������� ��������������������������������������������������������������������������������������������� 201 Electromagnetic Compatibility (EMC) �������������
Resumo do conteúdo contido na página número 4
VIVOTEK Overview VIVOTEK IP8336W is a compact cube camera designed for indoor/outdoor surveillance� The stylish design makes it the best choice for settings such as boutique stores, department stores, or museums� Equipped with a 1MP sensor enabling viewing resolution of 1280x800 at a smooth 30 fps, the IP8336W is an all-in-one outdoor camera capable of capturing high quality, high resolution video� Incorporating an IR-cut filter that can be removed automatically at night and built-in IR i
Resumo do conteúdo contido na página número 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system� It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take note of the
Resumo do conteúdo contido na página número 6
LED Definitions VIVOTEK Physical Description Front Panel Antenna Antenna Light Sensor Lens IR LEDs behind Microphone panel Status LED Item LED status Description 1 Steady Red Powered and system booting, or network failed 2 Blue LED blinks every 0�15 sec� Searching for WPS 3 Green LED blinks every 1 sec� Network connected to an AP 4 Green and RED blink consecutively every Upgrading firmware 0�15 sec� 5 Steady Blue Operating in camera default AP mode 6 Orange blinks every 0�15 sec� Restoring
Resumo do conteúdo contido na página número 7
VIVOTEK Bottom View Reset button MicroSD/SDHC WPS button Card Slot NOTE: An antenna comes with the camera� Install it by turning clockwise to attach to the connector� User's Manual - 7
Resumo do conteúdo contido na página número 8
VIVOTEK Digital Input Diagram Please refer to the following illustration for the connection method� Max. voltage: 40V 3.3V DI+ Digital input DI- DI-: Ground Connect a digital input device to the input pins of the camera� From the Applications > DI and DO page, you can let camera report the current signal status as High or Low, Open or Ground- ed, to determine the signal’s Normal status during operation � 8 - User's Manual
Resumo do conteúdo contido na página número 9
VIVOTEK Hardware Reset Reset Button The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory settings and install again� Reset: Press and release the reset button. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that all settings will be restore
Resumo do conteúdo contido na página número 10
VIVOTEK Installation Power Connection 1� If you have external devices such as a sensors and alarm, make connections from the digital input connector� DI+ DI- 2 Connect the power line to the power adaptor � � IMPORTANT: 1 Record the MAC address before installing the camera � � IP8336W 0002D10766AD 2. When you encounter configuration errors, you can press the WPS button for 5 seconds to restore network settings until the LED lights blue � The camera will then resume the original AP mode.
Resumo do conteúdo contido na página número 11
VIVOTEK Wireless Connection #1: Using the WPS Button 1� Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions WPS enables easy setup with compatible � APs � 2� Use the included hex wrench to open the bottom cover � When powered on, the camera LED should light red for a minute, and then turn blue� When lit blue, the camera operates in the AP mode� 3� Use the hex wrench to press the WPS button for 1 second� The LED will blink blue� 4� Press and
Resumo do conteúdo contido na página número 12
VIVOTEK Wireless Connection #2: Connection without WPS If not using the WPS method, you can manually configure the camera: 1� Connect power to the camera� By default, the camera operates in the AP mode Connect � to the camera using a Wi-Fi capable notebook or a computer with a wireless adaptor � Open the internet dialog box by clicking the wireless networks icon on the system tray � 1 AP mode 2 VIVOTEK (1C:CC) Client mode 3 AP 2� Right-click or double-click on the VIVOTEK (MAC addr) icon� Th
Resumo do conteúdo contido na página número 13
VIVOTEK You can also discover the camera using the IW2 utility Install the IW2 � utlity from the included product CD� 3� Enter your wireless AP's SSID and security password to connect to an existing AP � You may also use the "Search your AP" button to locate an AP of your preferrence. Click on an AP to make the connection� Select the security encryption, such as WEP or WPA-PSK, the algorithm, and enter the pre-share key� Click Save to proceed � The camera will then operate in the Cl
Resumo do conteúdo contido na página número 14
VIVOTEK 4� Open the IW2 utility� The camera will be assigned with a new IP address Double-click � on it to start a web session� The camera LED will start blinking green by every second� 5� A browser session with the Network Camera should prompt as shown below� 6� You should be able to see live video from your camera Y � ou may also install the 32-chan - nel recording software from the software CD in a deployment consisting of multiple cam- eras F � or its installation details, please refer to
Resumo do conteúdo contido na página número 15
VIVOTEK Wireless Connection #3: Initial Setup Using a Cell Phone 1� Connect power to the camera Search for the camera in the Wi-Fi Networks � � The camera ® initially operates in the AP mode� Screen captures have been taken from an iPhone � 2� Once connected, you should connect the camera to another AP� You should open a browser, enter the camera's default IP (192.168.1.1) in the URL field. When connected, manually enter the SSID and security code for access to another AP, or use the "S
Resumo do conteúdo contido na página número 16
VIVOTEK 4� Open the IW2 utility on a PC or laptop located in the same subnet of the camera� The camera will be assigned with a new IP address by the AP Double-click on it to start a web session � � Installing Camera 1� Drill holes on a wall or ceiling� 2� Insert the plastic anchors, and then mount the camera stand by driving the included screws� 3 Close and secure the bottom cover if you opened it � 4 � � Attach the camera by turning it around the threaded mount� 5� Adjust the camera's shoo
Resumo do conteúdo contido na página número 17
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below� 1 Connect your Network Camera � behind a router, the Internet environment is illustrated below � Regarding how to obtain your IP address, please refer to Software Installation on page 18 for details� IP address : 192.168.0.3 WAN (Wide Area Network ) Subnet mask : 255.255.255.0 Router IP addres
Resumo do conteúdo contido na página número 18
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� IW2 1� Install IW2 under the Software Utility directory from the software CD � Installation Double-click the IW2 shortcut on your desktop to launch the program� Wizard 2 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3 �
Resumo do conteúdo contido na página número 19
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras For � its installation details, please refer to its related documents� User's Manual - 19
Resumo do conteúdo contido na página número 20
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1� Launch your web browser (e�g�, Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP address of the Network
