Resumo do conteúdo contido na página número 1
H.264 Privacy Button Compact Design
IP8132/8133/8133W
IP8133W
Wireless
IP8132
Wired
IP8133
Wire ed d Po oE
Rev. 1.1
IP Surveillance
Resumo do conteúdo contido na página número 2
VIVOTEK Table of Contents Overview3 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������3 Package Contents ������������������������������������������������������
Resumo do conteúdo contido na página número 3
VIVOTEK Overview Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take not
Resumo do conteúdo contido na página número 4
LED Definitions VIVOTEK Physical Description Front Panel IP8132 Status LED Microphone Lens IP8133W Status LED Microphone NOTE: The front view of IP8133 is identical to that of IP8133W except the wireless antenna� Speaker White-light LED PIR Sensor Item LED status Description 1 Steady Red Power on and system boot Red LED off Power off 2 Blink Green every 1 sec� Network connected Steady Red Network failed 3 Blink Green every 2 sec� Audio muted 4 Blink Orange every 2 sec� Privacy button presse
Resumo do conteúdo contido na página número 5
VIVOTEK Back Panel IP8132 Ethernet 10/100 RJ45 Socket General I/O Terminal Block Power Cord Socket Recessed Reset Button IP8132 MAC:0002D132C353 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Pat. 6,930,709 Privacy Button IP8133 & 8133W General I/O Ethernet 10/100 T
Resumo do conteúdo contido na página número 6
VIVOTEK General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name 4 Power 3 Digital Output + 2 Digital Input - 1 Ground Hardware Reset The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory s
Resumo do conteúdo contido na página número 7
VIVOTEK Wireless Connection: Using the WPS Button 1� Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions� WPS enables easy setup with compatible APs� 2� Disconnect your LAN cable, and wait for the LED to turn red� 3� Press the WPS button for 1 second� You can then hear vocal instructions (in English) from the camera speaker� 4� Press and hold down the WPS button on your AP (some router/AP will have a virtual button on their management softwa
Resumo do conteúdo contido na página número 8
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet This section explains how to configure the Network Camera to an Internet connection� 1� If you have external devices such as sensors and alarms, make connections from general I/O terminal block� 2� Connect the camera to a switch via Ethernet cable� Use a Category 5 Cross Cable when Network Camera is directly connected to PC� 3� Connect the power cable from the Network
Resumo do conteúdo contido na página número 9
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK IP address : 192.168.0.3 W WA AN (Wide Area Network ) N (Wide Area Network ) Subnet mask : 255.255.255.0 R Ro ou ut te er r I IP P a ad dd dr re es ss s :: f fr ro om m I IS SP P P Default router : 192.168.0.1 Internet L LA AN ( N (Local Area Network) Local Area Network) R Ro ou ut te er r I IP P a ad dd dr re es ss s :: 192.168.0.1 Cable or DSL Modem IP address : 192.168.0.2 Subnet mask : 255.255.255.0 Default router : 192.168.0.1 2� In
Resumo do conteúdo contido na página número 10
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� 1� Install IW2 under the Software Utility directory from the software CD� Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� The program will search for
Resumo do conteúdo contido na página número 11
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras� For its installation details, please refer to its related documents� User's Manual - 11
Resumo do conteúdo contido na página número 12
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN� If your network environment is not a LAN, follow these steps to access the Network Camera: ® 1� Launch your web browser (ex� Microsoft Internet Explorer, Mozilla Firefox, or Netscape)� 2. Enter the IP addres
Resumo do conteúdo contido na página número 13
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 28� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1� Choose Tools > Internet Options > Security > Custom Level� ® 2. Loo
Resumo do conteúdo contido na página número 14
VIVOTEK IMPORTANT! • Currently the Network Camera utilizes 32-bit ActiveX plugin. You CAN NOT open a management/view session with the camera using a 64-bit IE browser� • If you encounter this problem, try execute the Iexplore.exe program from C:\ Windows\SysWOW64. A 32-bit version of IE browser will be installed. • On Windows 7, the 32-bit explorer browser can be accessed from here: C:\Program Files (x86)\Internet Explorer\iexplore.exe. 14 - User's Manual
Resumo do conteúdo contido na página número 15
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch the RTSP player� mpegable Player mpegable Player 2� Choose File > Open URL� A URL dialog box will pop up� 3. The address format is rtsp://:/
Resumo do conteúdo contido na página número 16
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
Resumo do conteúdo contido na página número 17
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software; then launch the program to add the Network Camera to the Channel list� For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it from http://www.vivotek.com� User's Manual - 17
Resumo do conteúdo contido na página número 18
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC� Logo, Host Name, Camera Control Area, Configuration Area, Menu, and Live Video Window� Resize Buttons VIVOTEK INC. Logo Host Name Camera Control Area Hide Button Live View Window Configuration Area VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website� Host Name The host name can be customized to fit your needs. For more information, please refer to System on p
Resumo do conteúdo contido na página número 19
VIVOTEK 繁體中文 in: English, Deutsch, Español, Français, Italiano, 日本語 , Português, 簡体中文 , and � Hide Button You can click the hide button to hide the control panel or display the control panel� Resize Buttons : Click the Auto button, the video cell will resize automatically to fit the monitor. Click 100% is to display the original homepage size� Click 50% is to resize the homepage to 50% of its original size� Click 25% is to resize the homepage to 25% of its original size� Live Video Window ■
Resumo do conteúdo contido na página número 20
VIVOTEK Pause: Pause the transmission of the streaming media. The button becomes the Resume button after clicking the Pause button� Stop: Stop the transmission of the streaming media. Click the Resume button to continue transmission� Start MP4 Recording Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer. Press the Stop MP4 Recording button to end recording� When you exit the web browser, video recording stops accordingly. To specify the s
