Resumo do conteúdo contido na página número 4
EQUIPMENT MODIFICATION CAUTION Equipment changes or modifications not expressly approved by Sensormatic Electronics Corporation, the party responsible for FCC compliance, could void the user's authority to operate the equipment and could create a hazardous condition. FCC COMPLIANCE This equipment has been tested and complies with the limits for a Class A digital device, according to Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference when
Resumo do conteúdo contido na página número 5
TABLE OF CONTENTS PREFACE: BEFORE YOU BEGIN...................................................................................................................................... V What’s In This Manual? ................................................................................................................................................... vi Text Conventions ..............................................................................................................................
Resumo do conteúdo contido na página número 6
APPENDIX A: SENSORNET AND RS-422 PROTOCOLS COMMAND SUMMARY ...................................................... A–1 Command Summary .................................................................................................................................................... A–2 Supported Controllers and Matrix Switching Systems.................................................................................................. A–3 Performance Notes .......................................
Resumo do conteúdo contido na página número 7
PREFACE Before You Begin This preface provides important information that you should be familiar with before using the SpeedDome Ultra VII camera dome. It includes a document overview, text conventions, a list of related documents, and how to obtain product help. In This Preface • What’s In This Manual?..................................................................................................vi • Text Conventions .....................................................................
Resumo do conteúdo contido na página número 8
What’s In This Manual? The SpeedDome Ultra VII Configuration Utility Operator's Manual is organized as follows: • Chapter 1:Using the Dome Configuration Utility, describes how to use the SpeedDome Ultra VII Camera Dome configuration utility. • Chapter 2: Configuring Pan, Tilt, Zoom, and Synchronization Options, describes how to set the “flip” feature, zoom stop, line lock, Freeze Frame and resuming auto iris/auto focus mode settings. • Chapter 3: Configuring Camera Features, describes how
Resumo do conteúdo contido na página número 9
Text Conventions This book uses text in different ways to identify different kinds of information. Used for terms specific to the system, and text that requires special Bold Italics emphasis, for example Preset. Italics Used for menu selections or settings, for example, On-screen Text Display. Bold Used for names of buttons, for example, Zoom. Notes are separated by ruled lines. Notes call attention to any items that may be of special importance. Icons identify the type of note.
Resumo do conteúdo contido na página número 10
NOTES: viii SpeedDome Ultra VII Operator's Manual
Resumo do conteúdo contido na página número 11
CHAPTER 1 Using the Dome Configuration Utility The SpeedDome Ultra VII 22x camera dome is an optical zoom camera enclosed in a compact dome housing. The camera dome supports advanced features such as 11X digital zoom (up to 242X total zoom), open shutter settings, privacy zones, and direction indicators. The Dome Configuration Utility is used to customize the camera dome's settings. This chapter introduces you to the Dome Configuration Utility. It explains how to start the utility, navig
Resumo do conteúdo contido na página número 12
What is the Dome Configuration Utility? The Dome Configuration Utility provides a means to setting features for your camera dome via a text overlay menu. You access this utility using a keystroke combination on your camera controller. The utility provides settings relating to camera functions, alarms, text display, privacy zones, direction indicators and password protection. Some items supplement similar features that may be available through your controller. Refer to your controller ope
Resumo do conteúdo contido na página número 13
Working with the Dome Configuration Utility Once the Dome Configuration Menu is displayed, you may select a menu item, and then modify the settings you want to change. The following table summarizes the controller commands for SensorNet, RS-422, and Manchester protocols. For combination keystrokes, press and hold each button in sequence, then release. If you want to … Use … Move the highlight bar. Pan/Tilt Select the highlighted item on the screen. Focus Increase the value of the select
Resumo do conteúdo contido na página número 14
To enter the password using SensorNet, RS-422, or Manchester protocols: 1. Use the Pan/Tilt control to move the highlight the appropriate character. 2. Press Focus to select the highlighted character. If you need to change a character that has been entered: • Zoom In moves the cursor to the right in the Password field. • Zoom Out moves the cursor to the left in the Password field. As each character in the password is selected, asterisks (*) appear in the Password field. When you hav
Resumo do conteúdo contido na página número 15
Exiting the Configuration Utility Under SensorNet, RS-422, and Manchester protocols, you may save your changes and exit the utility from any screen by pressing and holding Iris Close, then pressing Focus. From the Dome Configuration Menu, you have two choices for exiting the utility: Exit and Save Changes or Quit Without Saving. Use the Pan/Tilt control to move the highlight bar up and down on the screen. • If you want to keep the changes you made, move the highlight bar to Exit and Save Ch
Resumo do conteúdo contido na página número 16
Quick Set Command Description 0+Quick Set Toggles between displaying and hiding the quick set menu. 1+ Quick Set Displays the SpeedDome Ultra configuration menu. Refer to the dome manual for information about the available settings. 2+ Quick Set Resumes Auto Focus/Auto Iris mode. 3+ Quick Set Rotates the SpeedDome 180° from its current pointing direction. This is the same as pressing the Flip button on controllers with that feature. 4+ Quick Set Runs the default Apple Peel Pa
Resumo do conteúdo contido na página número 1
SpeedDome Ultra VII
22x Camera Dome
RAS915LS
RAS915LS-1
RAS916LS
RAS916LS-1
RAS916WLS
RAS916WLS-1
Configuration Utility Operator’s Manual
8200-0184-02 D
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
® SpeedDome Ultra VII 22x Camera Dome Configuration Utility Operator’s Manual Version – 0710-0147-0107
Resumo do conteúdo contido na página número 17
Where To Go Next Now that you understand how to start and work with the Dome Configuration Utility, you are ready to begin changing the settings for your dome. Use the following chart to determine which chapters you should use next. Chapter Topics Covered Chapter 2: Configuring Pan, Tilt, − Set the “flip” feature to rotate the dome 180° Zoom, and Synchronization Options − Set the first zoom stop (22X or 33X) and maximum zoom (up to 242X) − Set line lock to prevent vertical rolling when
Resumo do conteúdo contido na página número 18
Chapter Topics Covered Appendix A: SensorNet and − Summarizes the controller commands available for RS-422 Command Summary SensorNet/RS-422 Appendix B: Manchester − Summarizes the controller commands available for Manchester Command Summary − Performance limitations for Manchester Appendix C: Pelco Coaxitron and “P” − Summarizes the controller commands available for Pelco Protocols Command Summary Coaxitron and “P” protocols − Performance limitations for Coaxitron and “P” protoc
Resumo do conteúdo contido na página número 19
CHAPTER 2 Configuring Pan, Tilt, Zoom, and Synchronization Options This chapter describes the use of the Pan/Tilt/Zoom/Sync Opts menu. Use this screen to set the Auto Flip feature, configure the Zoom Stop settings, and set the Line Lock option. In This Chapter • Overview of Pan / Tilt / Zoom/Synchronization Options Screen ................................2–2 • Setting the Automatic “Flip” Feature...........................................................................2–2 • Adjusting th
Resumo do conteúdo contido na página número 20
Overview of Pan / Tilt / Zoom/Synchronization Options Screen When Pan/Tilt/Zoom/Sync Opts is selected from the Dome Configuration Menu, the following screen appears: PROPORTIONAL FLIP OFF/ON 1ST ZOOM STOP X 33/22 MAX TOTAL ZOOM X 44...242 LINE LOCK ON/OFF FREEZE FRAME OFF/ON I/F RETURN TO AUTO OFF/ON/ IRIS/FOCUS Use this screen to enable or disable the “automatic flip” feature, configure the zoom stop settings, set the line lock options, change the freeze frame settings, and return to
