Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Before You Use It is important to carefully examine the contents with the Chapter Package Contents after opening the package. If there is anything missing, contact your reseller. Read the Chapter Physical Description before assembling and operating the device and peripherals. Understanding the physical description can prevent damage caused by abnormal usage and reduce most problems during installation. Basically Network Camera is a network device and should be easy to use for those w
Resumo do conteúdo contido na página número 3
Table of Contents Before You Use.......................................................1 Table of Contents ...................................................2 Package Contents...................................................4 Features and Benefits.............................................5 Physical Description ...............................................7 Front Panel ......................................................................7 Rear Panel ............................
Resumo do conteúdo contido na página número 4
Configure System via FTP ................................................42 Telnet Commands ...........................................................47 Appendix ..............................................................49 A. Troubleshooting ..........................................................49 B. Frequently Asked Questions..........................................49 B. Frequently Asked Questions..........................................50 C. Upgrade System Firmware .........
Resumo do conteúdo contido na página número 5
Package Contents If any of the following items are missing, please contact your reseller. Network Camera IP2112/IP2122 I/O Connector Software CD Power adapter Quick installation guide Camera Stand CS Ring and wrench Warranty card 4
Resumo do conteúdo contido na página número 6
Features and Benefits Network Camera is a high-performance networking video transmitter. With powerful VLIW DSP core and fully optimized algorithm, it can compress and transmit the high quality real-time video through standard TCP/IP inter-network. In addition to meet the basic needs of video feed, many advanced features are added to help building applications of surveillance or web attraction. The state-of-art design well compromises among stable, robust, simple-to-use and flexibility.
Resumo do conteúdo contido na página número 7
security system in your home or office. Weekly schedule for automatic surveillance The user-defined time period will repeat weekly to check any security settings and accordingly sending notification or drive external devices. It is easy to install in SOHO, retail shop and home as a security system. Flexible I/O control for external devices There is one opto-isolated sensor input and one relay output to control external devices. System integrators can easily replace the current an
Resumo do conteúdo contido na página número 8
Physical Description Front Panel Manual focus ring Status LED Internal ring screw Status LED The dual color LED indicates system and network status including power-on-self-test and system activity. Refer to the Appendix for details. Manual focus ring The ring of the lens can be rotated to fine tune the focus. The video output at the rear panel can be used to monitor. Internal ring screw If another special lens is needed to replace the bundled one, the image may be
Resumo do conteúdo contido na página número 9
Rear Panel BNC video output connector A 75Ohms-resistance video connector can be connected to a TV for monitoring the video from the front CCD sensor. Ethernet 10/100 socket Connect to an Ethernet network with a UTP category 5 cable of length shorter than 100 meters according to the standard. Reset and restore button There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. General I/
Resumo do conteúdo contido na página número 10
Network Camera provides a general I/O terminal block with one digital input and one relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor and the state of voltage will be monitored from the initial state 'LOW'. The relay switch of pin 3 and pin 4 can be used to turn on or off the external device. Power cord socket Connect the power jack of the included power adapter. Connecting the power adapter should be the last operation while physically installin
Resumo do conteúdo contido na página número 11
How to Install To easily fit into various environments, Network Camera automatically detects the attached interfaces and configures itself to the best condition. The high performance built-in CCD and lens always give users delicate image quality. In the following content, "user" refers to those who can access Network Camera and "administrator" means the supervisor who has the root password to configure Network Camera in addition to general access. Administrators should carefully read
Resumo do conteúdo contido na página número 12
Ethernet Environment Hardware installation Before installing multiple Network Cameras at the well-chosen locations, the administrator should memorize the serial numbers on the packages respectively for future use. Cable connection Connect the supplied cables from Network Camera to related devices according to the above diagram. Note that the power adaptor must be kept unplugged until other cables are firmly connected. Power on Make sure all cables are correctly and f
Resumo do conteúdo contido na página número 13
Software installation Easy way with installer program In order to configure Network Camera’s remotely, administrators should keep the serial numbers of the new Network Camera’s for identification and initial passwords. After successfully mounting Network Camera’s in the proper position, run the Installer program on the PC in the same network to locate the newly mounted Network Camera’s. Network Camera’s also support manual setup procedures to non-Windows based environments. The manual p
Resumo do conteúdo contido na página número 14
click directly on to access the Network Camera in the default browser. If the IP address is taken by another network device in the network, the Installer program will pop out another message window to warn that the assigned IP conflicts. In this case, administrators should ask the network supervisor for a vacant IP address. While “Use this IP whenever system boots", is checked, a dialog window may pop out to ask for “Server FTP Port” and “Root Password” because they are already chang
Resumo do conteúdo contido na página número 15
Manual way with existing programs For those environments such as MAC, Linux, Unix or other operating systems, whose installer is not yet available, some common network tools including ARP and PING can be used to install Network Camera. Before proceeding further, make sure ARP and PING programs exist. First, type arp –s “assigned IP address” “Ethernet address” to add an entity in the system’s name table. The Ethernet address is identical to the serial number of Network Camera and shou
Resumo do conteúdo contido na página número 16
First access to Network Camera Change initial password of administrator Starting the Web browser to connect to the assigned IP address of Network Camera, users will be asked for user name and password by an authentication message window. A root password, identical to the Network Camera's serial number, is needed for the initial access to a newly installed Network Camera. The administrator must change the root password immediately after the initial installation to ensure security. The new
Resumo do conteúdo contido na página número 17
How to Use Open your familiar web browser and connect to Network Camera just like any general web site and the video will present on demand. Make sure the web address of the target Network Camera is accurate. Authentication After opening the Web browser and typing in the URL of Network Camera, a dialogue window will pop out to request a username and password. For administrator’s initial usage of Network Camera, enter the username as “root” and the password as the serial number in capi
Resumo do conteúdo contido na página número 18
Installing Plug-in If it is initial access to Network Camera via the Web browser supporting server push, the motioned pictures will display directly. If the Web browser is Internet Explorer in Windows, users will be asked to install a new plug-in that is provided by Network Camera. This plug-in has been registered for certificate and is used to display motioned pictures in the Internet Explorer. Users may click on to install the plug-in. If the web browser does not allow the user to ins
Resumo do conteúdo contido na página número 19
Main Page Basic functions are displayed in main entrance page of Network Camera. The first figure below is graphic mode that has better visual effect and the second one is text mode that will shorten download time. The main page may look different depending on the PT scanner or the privilege of the user. Graphic mode Compress Level Image Size System Configuration 18
Resumo do conteúdo contido na página número 20
Text mode Text mode is default if any image button is not available. Network Camera Video quality selection It allows users to adjust the video quality for speed or smoothness. The performance is also subject to the network bandwidth and the number of users. Five options are available to be chosen from “Medium” to “Excellent”. “Medium” quality means the picture has the quickest refresh rate but the worst image quality and “Excellent” quality means the picture has the slo
