Resumo do conteúdo contido na página número 1
Operating Instructions
Network Camera
Model No. WV-SP105, WV-SP102
WV-SP105E, WV-SP102E
WV-SP105 WV-SP102
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
WV-SP105
WV-SP102
Resumo do conteúdo contido na página número 2
CONTENTS Preface ........................................................................ 3 Configuration of the settings relating to the mail About the user manuals .......................................... 3 notification [Notification] ........................................ 36 About notations ....................................................... 3 Configure the settings relating to Panasonic Trademarks and registered trademarks .................. 3 alarm protocol [Notification] .......
Resumo do conteúdo contido na página número 3
Preface About the user manuals There are 2 sets of operating instructions for the WV-SP105, WV-SP102 (NTSC model), WV-SP105E, WV-SP102E (PAL model) as follows. • Installation Guide: Explains how to install and connect devices. • Operating Instructions (PDF): Explains how to perform the settings and how to operate this camera. ® ® Adobe Reader is r equir ed to r ead these operating instructions (PDF) on the pr ovided CD-ROM. ® ® ® ® When the Adobe Reader is not installed on the PC, downl
Resumo do conteúdo contido na página número 4
Viewer software • It is necessary to install the viewer softwar e "Network Camera View 4S" to display images on a PC. This soft- war e can be installed dir ectly fr om the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM pr o- vided, and then following the on-screen instructions. Important: • The default setting of "Automatic installation of Viewer softwar e" is "On". Follow the instructions on page 63 when the message is dis- played on the information bar of the browser.
Resumo do conteúdo contido na página número 5
Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Important: Start up the web browser. • When the HTTP port number is changed fr om "80", enter "http://IP addr ess of the camera + : (colon) + Step 2 port number" in the address box of the browser. Example: If the port number is set to "8080": Enter the IP address designated using the Panasonic IP http://192.168.0.11:8080 setup software i
Resumo do conteúdo contido na página número 6
Important: • T o enhance the security , change the passwor d for the user name "admin". It is r ecommended to change this password periodically. • When displaying multiple H.264 images on a PC, images may not be displayed depending on the performance of the PC. Note: • The maximum number of concurr ent access user is 14 including users who is r eceiving H.264 images and users who are receiving JPEG images. Depending on the set values for "Bandwidth control(bit rate)" and "Max bit
Resumo do conteúdo contido na página número 7
About the "Live" page i o !0 !1 q w e r t !2 y u 1 q [Setup] button* t [Image capture size] buttons Displays the setup menu. The button will turn green These buttons will be displayed only when a JPEG and the setup menu will be displayed. image is displayed. [VGA] button: The letters "VGA" will turn green and w [Live] button images in the main area will be displayed in VGA Display the "Live" page. The button will turn green size. and the "Live" page will be displayed. [QVGA] button:
Resumo do conteúdo contido na página número 8
!2 Main area Note: Images from the camera will be displayed in this • The buttons [VGA] and [QVGA] ar e displayed only area. when "4:3" is selected for "Aspect ratio". The current time and date will be displayed accord- • The buttons [640x360] and [320x180] ar e displayed ing to the settings configured for "Time display for- only when "16:9" is selected for "Aspect ratio". mat" and "Date/time display format". (☞ Page 17) • When "1280x960" or "1280x720" is selected for the Whe
Resumo do conteúdo contido na página número 9
Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. (☞ Page 30) Important: • When displaying images on a 16-scr een, panning, tilting and zooming operations become unavailable for images from the
Resumo do conteúdo contido na página número 10
Action at an alarm occurrence The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur. Alarm type VMD alarm: When motion is detected in the set VMD ar ea, the alarm action will be performed. * VMD stands for "Video Motion Detection". Command alarm: When a Panasonic alarm pr otocol is r eceived fr om the connected device via a network, the alarm action will be performed. Action at an alarm occurrence Display the alarm occurrence indicati
Resumo do conteúdo contido na página número 11
Transmit images onto an FTP server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, set the user name and the passwor d to access the FTP server to r estrict users who can log into the FTP server. Transmit an alarm image at an alarm occurrence (Alarm image transmission) An alarm image
Resumo do conteúdo contido na página número 12
About the network security Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "On". (☞ Pages 38 and 39) w Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port n
Resumo do conteúdo contido na página número 13
Display the setup menu from a PC The settings of the camera can be configured on the setup menu. Important: • The setup menu is only operable by users whose access level is "1. Administrator". Refer to page 38 for how to configure the access level. How to display the setup menu Step 1 Step 3 Display the "Live" page. (☞ Page 5) Click the [OK] button after entering the user name and the password. Step 2 Click the [Setup] button on the "Live" page. → The window with the user name an
Resumo do conteúdo contido na página número 14
How to operate the setup menu Menu buttons Setup page Step 1 Step 2 Click the desired button in the frame on the left of the Complete each setting item displayed in the frame on window to display the respective setup menu. the right of the window. When there are tabs at the top of the setup page dis- played in the frame on the right of the window, click the Step 3 desired tab to display and configure the setting items After completing each setting item, click the [Set] but- relating to the na
Resumo do conteúdo contido na página número 15
About the setup menu window q [Setup] button !3 Camera title w [Live] button e [Basic] button r [Image] button t [Multi-screen] button y [Alarm] button u [User mng.] button !4 Setup page i [Server] button o [Network] button !0 [Schedule] button !1 [Maintenance] button !2 [Help] button q [Setup] button y [Alarm] button Displays the setup menu. Displays the "Alarm" page. The settings relating to alarm occurrences such as settings for the alarm w [Live] button action at an alarm occurrence
Resumo do conteúdo contido na página número 16
!0 [Schedule] button Displays the "Schedule" page. On the "Schedule" page, it is possible to designate time zones to allow to activate the VMD detection function or allow to access the cameras. (☞ Page 52) !1 [Maintenance] button Displays the "Maintenance" page. System log check, firmware upgrade and initialization of the setup menu can be carried out on the "Maintenance" page. (☞ Page 53) !2 [Help] button Displays the "Help" page. (☞ Page 56) !3 Camera title The title of the
Resumo do conteúdo contido na página número 17
Configure the basic settings of the camera [Basic] The basic settings such as camera title and time and date can be configured on the "Basic" page. Configure the basic settings [Basic] Click the [Basic] tab on the "Basic" page. (☞ Pages 13 and 14: How to display/operate the setup menu) The settings such as the camera title, time and date, etc. can be configured on this page. [Date/time display format] Select a date/time display format. When "2010/04/01 13:10:00" is set for "Date/time" after s
Resumo do conteúdo contido na página número 18
[OSD position] Polling(30sec): Updates the status each 30 seconds Select the position where the time and date and a char- and provide notification of the camera status. acter string to be displayed on the image of the "Live" Real time: Provide notification of the camera status page. when the status has changed. Upper left: The above information will be displayed at Default: Real time the upper left corner of the main area on the "Live" page. Note: Lower left: The above information will be d
Resumo do conteúdo contido na página número 19
Configure the settings relating to images [Image] The settings relating to JPEG and H.264 images such as the settings of image quality, etc. can be configured on this page. The "Image" page has 2 tabs; the [JPEG/H.264] tab and the [Image/Privacy] tab. Configure the settings relating to the aspect ratio [JPEG/H.264] Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu) Note: • i-PRO Series does not support aspect ratio of "16:9", if no
Resumo do conteúdo contido na página número 20
[Image quality] Specify the image quality of JPEG images. 0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low Default: 5 Normal Configure the settings relating to H.264 images [JPEG/H.264] Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu) Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Image quality", etc. in this section. Refer to page 19 for further information about t
