Resumo do conteúdo contido na página número 1
Quick Start Guide
Quick Start Guide
Be sure to install the software programs before connecting the scanner
to the computer!
Setup and Scanning
Check the Package Contents
p.2
Install the Software
Windows
p.3
Macintosh p.4
Unlock the Scanning Unit
p.5
Connect the Scanner
p.6
Try Scanning
p.7
Try the Additional Features
Using the Scanner Buttons
p.10
Scanning Film
p.11
1
Resumo do conteúdo contido na página número 2
Color Image Scanner Models F917000: (CanoScan LiDE 80) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed t
Resumo do conteúdo contido na página número 3
Guide to the Manuals Guide to the Manuals Open the Package Quick Start Guide (this guide) This guide describes a series of processes, from opening the package to using the scanner. READ THIS GUIDE FIRST! Scanning Guide (HTML format manual) Refer to this guide when you have finished setting up the scanner according to the procedures in the Quick Start Guide. It describes how to utilize the scanner with the bundled software, and how to solve problems when they occur. You can install this manual
Resumo do conteúdo contido na página número 4
Check the Package Contents Check the Package Contents Scanner and Accessories USB Interface Cable Stand Film Guide CanoScan LiDE 80 Film Adapter Unit Documents and Software Programs • Quick Start Guide (this guide) • Additional Documents • CanoScan Setup Utility CD-ROM • The two figures in the brackets below indicate the respective sizes of the Windows/ Macintosh versions of the software. • Approximately 514 MB (for Windows) / 303 MB (for Macintosh) of hard disk space on your computer is requir
Resumo do conteúdo contido na página número 5
Install the Software (Windows) Install the Software (Windows) • With Windows XP/2000, you should log on with an administrator user name when you install or uninstall software programs. 1 Turn the computer on. If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click [Cancel]. 2 Place the CanoScan Setup Utility CD-ROM in the drive. The CanoScan Setup Utility main menu will display. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if yo
Resumo do conteúdo contido na página número 6
Install the Software (Macintosh) Install the Software (Macintosh) 1 Turn the computer on. If the “...Would you like to look for the software on the Internet?” appears, click [Cancel]. 2 Place the CanoScan Setup Utility CD-ROM in the drive. The CanoScan Setup Utility main menu will display. If no window displays, double-click the CD-ROM icon, then the Setup icon. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if you accept the terms. The [Install] windo
Resumo do conteúdo contido na página número 7
Unlock the Scanning Unit Unlock the Scanning Unit • Unlock the scanning unit before connecting the scanner to the computer. If it is left locked, a malfunction or other problem may occur. 1 Peel the caution seal from the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). Lock Switch Unlock Mark 4 Return the scanner to a horizontal position. • When carrying or transporting the scanner in a vehicle, always lock the scanning unit by pushing the lock swit
Resumo do conteúdo contido na página número 8
Connect the Scanner Connect the Scanner • Make sure that the scanning unit is unlocked. (P.5) 1 Peel the caution seals from the scanner. 2 Connect the scanner to the computer with the supplied USB interface cable. Small Square Connector Wide Flat Connector USB Interface Cable • Only use the USB interface cable provided with the scanner. Use of other cables may lead to a malfunction. • The scanner does not have a power switch. The power is activated as soon as the computer is turned on. Using t
Resumo do conteúdo contido na página número 9
Try Scanning Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the document glass of the scanner by aligning its top edge with the alignment mark, and close the document cover. Bottom Top Alignment Mark Windows Macintosh 2 Select [Start], [Programs] or [All 2 Double-click the [Applications (Mac OS Programs], [ArcSoft PhotoStudio] and 9)] and [PhotoStudio] folder and the [PhotoStudio 5]. [PhotoStudio] icon. PhotoStudio will sta
Resumo do conteúdo contido na página número 10
Try Scanning Macintosh Windows 3 Click the Acquire icon or click the 3 Click the Acquire icon or click the [File] menu and select [Acquire]. [File] menu and select [Import...]. ScanGear CS will start. When the [Select Source] dialog displays, select [ScanGear CS 7.2] and click the [OK] button. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. ScanGear CS will start. 4 In the [Select source] category,
Resumo do conteúdo contido na página número 11
Try Scanning 7 Click [Scan]. The final scan will start. 8 Click or (close box) in the ScanGear CS window to close it. The scanned image will appear in the PhotoStudio window. 9 Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPG format is recommended) and click [Save]. 10 Click or (close box) in the PhotoStudio window to close it. • If the scanner does not perform as des
Resumo do conteúdo contido na página número 12
Using the Scanner Buttons Using the Scanner Buttons You can use the four convenient buttons on the scanner’s front panel to scan and perform related tasks easily with a single touch of the button. Place an item on the document glass of the scanner before pressing a button. • To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoBase and Presto! PageManager (for Windows)/Acrobat Reader (for Macintosh) should be installed from the CanoScan Setup Utility CD-ROM. COPY Button E-MAI
Resumo do conteúdo contido na página número 13
Scanning Film Scanning Film This scanner can scan 35 mm film strips one frame at a time. Preparing to Scan Film Use the following procedures to place the Film Adapter Unit and the Film Guide on the document glass to scan film. • Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can affect image quality or damage the film. • You cannot scan film with the scanner in the upright position. 1 Attach the cable for the Film Adapter Unit to the FAU connector on
Resumo do conteúdo contido na página número 14
Scanning Film 2 Gently close the document cover. • Do not press down on, or rest your hands on, the document cover. • Be careful not to force the document cover down. 3 Start ArcSoft PhotoStudio. Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5]. Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folders and the [PhotoStudio] icon. • If ScanGear CS is already running, click the close box ( Windows, Macintosh) and close it. 4 Start ScanGear CS
Resumo do conteúdo contido na página número 15
Scanning Film 7 Open the document cover and remove the Film Adapter Unit. To continue scanning your film, follow the Scanning Film steps. Put the CAP back on the Film Adapter Unit. Scanning Film The following steps explain how to scan films with ArcSoft PhotoStudio and ScanGear CS. 1 Place the film in the Film Guide. Place the film face up in the Film Guide (images and words should read correctly from above) with the spaces between frames aligned with the white lines on the guide. Whit
Resumo do conteúdo contido na página número 16
Scanning Film 5 Start ScanGear CS. Click the Acquire icon or click the [File] menu and select [Acquire]. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. Click the Acquire icon or click the [File] menu and select [Import...]. When the [Select Source] dialog displays, select [ScanGear CS 7.2] and click the [OK] button. ScanGear CS will start. 6 In the [Select source] category, select [Color Negative Fil
Resumo do conteúdo contido na página número 17
Scanning Film 11 Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPG format is recommended) and click [Save]. Calibration Message You must calibrate the scanner if the message to the right appears. Use the following procedures to calibrate it. 1. Open the document cover and remove the Film Adapter Unit. 2. Remove the film from the Film Guide and position the Film Adapter Uni
Resumo do conteúdo contido na página número 18
Specifications Specifications CanoScan LiDE 80 Scanner Type Flatbed Scanning Element CIS (Color Contact Image Sensor) Light Source 3-color (RGB) LED Optical Resolution 2400 x 4800 dpi Selectable Resolution 25 - 9600 dpi (ScanGear CS) Color 16 bit input / 16 bit or 8 bit output for each color (RGB) Scanning Bit Depth *1 Grayscale 16 bit input / 16 bit or 8 bit output *2 Color 10.38 msec./line (1200 dpi), 20.7 msec./line (2400 dpi) Scanning Speed (Photo or Document) Grayscale,B&W 3.46 msec./line
Resumo do conteúdo contido na página número 19
System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a safe location. • This information is also required to request a repair under warranty. Make sure you record the information and store it in a safe location. • Guaranteed servicing for this equipment will expire five ye
Resumo do conteúdo contido na página número 20
CANON INC. CANON DANMARK A/S 30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan 1. Kund Højgaards Vej1, DK-2860 Søborg, Denmark Hotline: +45 44 88 25 91 CANON U.S.A., INC. Forhandlerhenvisning: One Canon Plaza, Lake Success, New York 11042, U.S.A. http://www.canon.dk Customer Care Center: 1-757-413-2848 http://www.usa.canon.com/consumer CANON NORGE as Hallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway CANON CANADA INC. Tlf: 2262 9321 Faks: 2262 0615 6390 Dixie Road, Mississau
