Resumo do conteúdo contido na página número 1
INSTRUCTION MANUAL
620W
Variable Speed Jigsaw
with LightSabre
• London • Melbourne • Perth • Taipei • Verona
LS620SR
• Hong Kong • New York • Auckland • Paris 020919 LS620LSR ED9
Resumo do conteúdo contido na página número 2
Contents Introduction 3 Full 2 Years Warranty Environmental protection 3 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass Symbols 3 manufacturing techniques, a tool may not live up to our Specifications 3 required level of performance and you may need the Safety rules for laser lights 3 assistance of our service department. General safety instructions 4 This product is warranted for a 2-year period from the date of the original purcha
Resumo do conteúdo contido na página número 3
Dear Customer Symbols If you require any help with your product, whether it is a The rating plate on your tool may show symbols. These Warranty claim, spare part or user information: represent important information about the product or instructions on its use. please phone our Help Line for an immediate response. The appropriate number is given on the rear page of this Wear hearing protection. manual. Wear eye protection. Wear breathing protection. Introduction Double insulated Your new GMC p
Resumo do conteúdo contido na página número 4
• The laser shall be used and maintained in accordance regulations in force in your area. The same applies for with the manufacturer’s instructions. general rules of occupational health and safety. • Never aim the beam at any person or an object other Warning. When using power tools, basic safety than the work piece. precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read • The laser beam shall not be deliberately aimed at and heed the
Resumo do conteúdo contido na página número 5
cord away from heat, oil and sharp edges. conditions that may affect the operation of the tool. A part that is damaged should be properly repaired or 10. Secure the work piece. Use clamps or a vice to hold replaced by an authorised service facility, unless the work piece. It is safer than using your hand and otherwise indicated in this Instruction Manual. frees both hands to operate the tool. Defective switches must be replaced by an authorised 11. Do not overreach. Keep your footing secure and
Resumo do conteúdo contido na página número 6
• Before cutting, check that there is sufficient clearance • Always hold the saw on parts that are insulated. If you for the blade under the work piece. accidentally cut into hidden wiring or the saw’s own cable, the metal parts of the saw will become ‘live’. • Do not touch the blade after operation. It will be very hot. • Check the voltage on mains matches that of rating plate before plugging in the tool. • Keep your hands away from under the work piece. • Do not secure the jigsaw upside down i
Resumo do conteúdo contido na página número 7
Know your product 1. Laser light assembly 9. Dust extraction outlet Before using the jigsaw, familiarise yourself with all the 2. Laser light on/off switch 10. Shoe plate operating features and safety requirements. 3. Laser light battery cover 11. Blade guard Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. 4. Laser aperture 12. Blade roller guide 5. Laser warning label 13. Cutting angle scale (not shown) (not shown) 6. On/off switc
Resumo do conteúdo contido na página número 8
Adjusting the shoe for angular cutting Dust extraction Caution. Always ensure that the jigsaw is switched off 1. To improve dust extraction from the working area, and plug is removed from the power point before making connect dust extraction equipment to the dust any adjustments. extraction outlet (9) at the rear of the tool. 1. Loosen the 2 hex screws 2. The vacuum adapter located on the underside supplied can be used to of the tool using the hex connect an ordinary key provided. household vacu
Resumo do conteúdo contido na página número 9
1. The electronic speed control Fitting the straight guide dial (15) is used to 1. Push the guide (14) into the slot in the shoe plate programme the speed of the (10) to the approximate required position. blade. 2. Place the short locking bar (a) on the guide and secure 2. The speed should be it finger-tight with screw (b). The screw fits point first adapted to the material through the hole in the shoe plate. being cut. 3. Use your thumb to turn the dial forward to increase the speed and backwar
Resumo do conteúdo contido na página número 10
3. Tighten the 2 hex screws. 7. Switch off the laser beam on completion of the cut. 4. Replace the plug and run the saw under no load to Changing the batteries check that it runs smoothly before using it to cut any 1. Hold the jigsaw with both hands and use your thumbs materials. to push the base of the laser light battery cover (3) upwards. Steady it with your index fingers to prevent it Using the LightSabre system getting away from you. Warnings. Do not stare directly at the laser beam. 2. Rep
Resumo do conteúdo contido na página número 11
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
