Resumo do conteúdo contido na página número 1
OPERATION AND PARTS MANUAL
MP1 SERIES
MODELS
MP1455H (5.5 HP GASOLINE)
MP1415E (1.5 HP ELECTRIC)
MP1420E (2.0 HP ELECTRIC)
MASONRY SAWS
Revision #3 (03/29/10)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 25939
Resumo do conteúdo contido na página número 2
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Your risk from these exposures varies, dependingonh
Resumo do conteúdo contido na página número 3
SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drillingofmasonry,concrete,metaland Grinding/cutting/drillingofmasonry,concrete,metaland othermaterialswithsilicaintheircompositionmaygive other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basiccomponentofsand,quartz,brickclay,graniteand injury or illness, such as respiratory diseas
Resumo do conteúdo contido na página número 4
TABLE OF CONTENTS MP1 MASONRY SAW HONDA GX160K1QXC9 Proposition 65 Warning ............................................. 2 GASOLINE ENGINE Silicosis/Respiratory Warnings .................................. 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation .................................... 8-10 Operation and Safety
Resumo do conteúdo contido na página número 5
PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. View Parts Diagrams To obtain an MQ Account, contact your Order Parts District Sales Manager for more information. Print Specification Information Use the interne
Resumo do conteúdo contido na página número 6
SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating Guards and Covers In Place this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NEVER This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the NOTE MULTIQUIP MP1 Rotating Blade Before using this MA
Resumo do conteúdo contido na página número 7
SAFETY MESSAGE ALERT SYMBOLS Over Speed Conditions HAZARD SYMBOLS - Gasoline Powered Models NEVER Lethal Exhaust Gases NEVER Respiratory Hazard ALWAYS Explosive Fuel DO NOT DO NOT Sight and Hearing hazard DO NOT ALWAYS NEVER Equipment Damage Messages This saw, other property, or the NOTE surrounding environment could be damaged if you do not follow instructions. MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10) — PAGE 7
Resumo do conteúdo contido na página número 8
RULES FOR SAFE OPERATION CAUTION: SAFETY - GASOLINE POWERED ENGINES Failure to follow instructions in this manual may ■ NEVER touch the hot exhaust lead to serious injury or even death! This manifold, muffler or cylinder. Allow equipment is to be operated by trained and these parts to cool before servicing qualified personnel only! This equipment is the saw. for industrial use only. The following safety guidelines should always be used when operating the MP1 SAW. Unless otherwise noted, these
Resumo do conteúdo contido na página número 9
RULES FOR SAFE OPERATION SAFETY - ELECTRIC POWERED MODELS WARNING ■ ALWAYS connect the motor to a power source in compliance with all local electrical codes. This must be performed by a qualified electrician. ■ ALWAYS check to make sure that the ■ ALWAYS use only outdoor approved GROUNDED extension operating area is clear before starting the cords. engine. BLADE SAFETY ■ MAKE CERTAIN the power cord/extension cord is free from damage and that the grounding circuit is operational. ■ Use appro
Resumo do conteúdo contido na página número 10
RULES FOR SAFE OPERATION SAW TRANSPORTATION SAFETY SAW MAINTENANCE (CLEANING) ■ Use an appropriate lifting equipment to ensure the safe ■ ALWAYS clean the saw before maintenance or repair. movement of the saw. ■ DO NOT use aggressive cleaners (i.e. containing solvents). DO NOT use high pressure water jets, aggressive detergents ■ DO NOT use the handles as lifting points. or solutions and liquids with a temperature exceeding 86 F. ■ Safeguard against extreme saw attitudes relative to level. Use a
Resumo do conteúdo contido na página número 11
NOTES MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10) — PAGE 11
Resumo do conteúdo contido na página número 12
SPECIFICATIONS (SAW/ENGINE) TW ABLE1S . MP1 SA SPECIFICATION 43.75" x 33" x 27" (111.125 cm x 83.82 cm x 68.58 cm) Dimensions 165 lbs. (75 Kg.) Approximate Weight 3450 RPM (See Table 2) Electric Motor Speed 2588 RPM Blade Speed 115V/60Hz, Thermally protected Water Pump 5.5 HP 4 cycle, Single Cylinder, Air Cooled, Honda (See Table 2) Engine (Gasoline) Blade Speed 2800 RPM Water Pump Optional Kit 25807-502 GENERAL Blade Capacity 14 in. blade maximum Cutting Depth 5 in. with 14 in. blade TABLE 2. M
Resumo do conteúdo contido na página número 13
DIMENSIONS Figure 1. Dimensions TABLE 3. DIMENSIONS RS EF. DIMENSION A 29.0 in. (74 cm) (electric motor) A 29.0 in. (74 cm) (gasoline engine) B) 42.0 in. (106 cm C) 27.0 in. (58.6 cm D) 5.5 in. (13.97 cm E) 14.5 in. (36.8 cm F) 11.5 in. (29.2 cm G) 2.5 in. (6.35 meters H) 19.0 in. (48.2 meters MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10) — PAGE 13
Resumo do conteúdo contido na página número 14
GENERAL INFORMATION MP1 MASONRY SAW ACCESSORIES/REPLACEMENT PARTS If desired the MP1 masonry saw can be equipped with a scissors The MP1 masonry saw is designed for vigorous wet-cutting type support stand P/N TRAK14SS, this stand is ideal when the masonry applications. The heavy-duty aluminum conveyor cart saw needs to be transported and placed on a secure reliable and ball bearing roller wheels ensure material stability and platform. smooth travel. In addition a reinforced jig-welded steel fram
Resumo do conteúdo contido na página número 15
NOTES MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10) — PAGE 15
Resumo do conteúdo contido na página número 16
CONTROLS AND COMPONENTS Figure 2. MP1 Saw (Electric/Gasoline) PAGE 16 — MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10)
Resumo do conteúdo contido na página número 17
CONTROLS AND COMPONENTS Figure 2 shows the location of the basic controls or components 16. Carrying Handle (Tray) – Grip this handle (right-side) to for the MP1 saw. Listed below is a brief explanation of each trasport the saw. control or component. 17. Electric Water Pump – For best results place the pump between the splash shield and the rear of the water tray. 1. Ruler Backstop – When cutting, place material against This is for electric models only. Plug water pump power backstop. Use meas
Resumo do conteúdo contido na página número 18
MP1 — ELECTRIC MOTOR COMPONENTS Figure 3. Electric Motor Components PAGE 18 — MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10)
Resumo do conteúdo contido na página número 19
MP1 — ENGINE COMPONENTS Figure 4. Engine Controls and Components INITIAL SERVICING-GASOLINE ENGINE 7. Air Cleaner – Prevents dirt and other debris from entering The engine (Figure 4) must be checked for proper lubrication and the fuel system. Remove wing-nut on top of air filter filled with fuel prior to operation. Refer to the manufacturers engine cannister to gain access to filter element. manual for instructions & details of operation and servicing. 1. Fuel Filler Cap – Remove this cap t
Resumo do conteúdo contido na página número 20
PRE-SETUP (ELECTRIC) PRE-SETUP 6. Insert the water pump power plug into the outlet receptacle on the electric motor conduit box as shown in Figure 6. WARNING Whenever cleaning, adjusting or lubricating any part of the saw, MAKE CERTAIN to place the power ON/OFF switch in the OFF position and disconnect the plug from the power source. Assembly (Electric Powered Saws Only) 1. Open the shipping container carefully, lift the saw by its carrying handles and place it on a suitable table or platform.
