Resumo do conteúdo contido na página número 1
D-Link
DVG-1402S
2Voice + 4SW VoIP Router
Manual
Building Networks for People
Version B.1
Resumo do conteúdo contido na página número 2
Contents Package Contents........................................................................................................... 3 Introduction ..................................................................................................................... 4 Rear Panel Connections................................................................................................. 5 Front Panel LEDs .......................................................................................
Resumo do conteúdo contido na página número 3
Home > VoIP > Manage Features > Reject Incoming Call........................................ 31 Home > VoIP > Manage Features > Block Outgoing Call......................................... 32 Home > DHCP ........................................................................................................... 33 Home > Proxy DNS ................................................................................................... 35 Advanced > Virtual Server....................................
Resumo do conteúdo contido na página número 4
Package Contents • D-Link DVG-1402S Router • Power Adapter - AC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet Cable (All the Ethernet ports on DVG-1402S are Auto-MDIX) Note: Using a power supply with a different voltage rating than the one included with the DVG-1402S will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. • System Requirements for Configuration • Ethernet-Based Cable o
Resumo do conteúdo contido na página número 5
Introduction The D-Link DVG-1402S High-Speed VoIP Router Links traditional telephony networks to IP networks with conventional telephony devices such as analog phones or fax machines. It can reduce long distance phone charges and deliver toll-quality voice communication over the IP network. This gateway provides two loop start Foreign Exchange Subscriber (FXS) ports and four LAN ports. One Ethernet port for a DSL/Cable Modem or other WAN devices, and the other for connection to create a
Resumo do conteúdo contido na página número 6
Rear Panel Connections Phone Auto MDI/MDIX Factory Reset Connections LAN Ports Button Connect to Connect the Pressing this your phones Ethernet cable button will using from computers restore the router standard on your LAN to to its factory phone these ports. default settings. cabling. WAN Port Power All Ethernet Ports (WAN Adapter and LAN) are auto Connect MDI/MDIX, meaning you the Connect can use either a Ethernet your 12V straight-through or a cable fr
Resumo do conteúdo contido na página número 7
Front Panel LEDs Status LED WAN LED Phone LEDs A blinking LED An active LED The Hook LED will indicates the indicates a link light when a DVG-1402S is has been telephone is off the functioning established. A hook. A blinking LED properly. blinking LED indicates an indicates incoming call is activity on the detected. WAN port. Power LED A solid light LAN LEDs indicates a An active LED indicates a valid link has been established. connection A blinking LED indicates to the powe
Resumo do conteúdo contido na página número 8
Features • 1 NWay 10/100BASE-TX Fast Ethernet port for WAN-connection • 4 NWay 10/100BASE-TX Fast Ethernet port for LAN-connection • 2 Foreign Exchange Subscriber (FXS) POTS ports (RJ-11 Jacks) • Voice Activity Detection (VAD) /Comfort Noise Generation (CNG) • Silence suppression to reduce bandwidth consumption. • Adaptive jitter buffer for a smooth voice reception • Lost packet recovery ability for improved voice quality • Support QoS (Quality of Service) for voice quality guarante
Resumo do conteúdo contido na página número 9
Installation For a typical setup at home, please do the following: 1. You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office) 2. Consult with your Cable or DSL provider for proper installation of the modem 3. Connect the Cable or DSL modem to the DVG-1402S VoIP Router (see the printed Quick Installation Guide included with your router.) 4. Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DVG-140
Resumo do conteúdo contido na página número 10
Using the Configuration Wizard Whenever you want to configure 192.168.15.1 your net work or the DVG-1402S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DVG-1402S. The DVG-1402S default IP Address is shown to the right: • Open the web browser • Type in the IP Address of the Router (http://192.168.15.1) • Type admin in the User Name field • Type admin in the Password field • Click OK
Resumo do conteúdo contido na página número 11
Home > WAN Dynamic Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option should be selected if your ISP has not supplied you with an IP address. This option is commonly used for Cable modem services. Host Name The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. MAC Address The default MAC Address is set to the WAN’s physical interface MAC address on the Bro
Resumo do conteúdo contido na página número 12
MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. Enter a DNS Address if you wish not to use the address provided by your ISP. The upstream bandwidth can be set for the data traffic. The Upstream Bandwidth bandwid
Resumo do conteúdo contido na página número 13
Home > WAN > Static IP Address Static IP Address Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address Input the public IP Address
Resumo do conteúdo contido na página número 14
Input the primary DNS (Domain Name Server) IP address provided by your ISP This is an optional DNS Address entry to be used if the primary Secondary DNS DNS Fails. Address Upstream Bandwidth The upstream bandwidth can be set for the type of packets that the will be sent. The bandwidth can be maximized for voice packets and limited for data that requires less throughput. 13
Resumo do conteúdo contido na página número 15
Home > WAN > PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. PPPoE Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) Password Enter The PPPoE user name provided to you by your ISP. Retype Password Retype the password entered in the previous field. Service Name Ent
Resumo do conteúdo contido na página número 16
provided by your ISP Secondary DNS This is an optional DNS Address entry to be used if the primary Address DNS fails. The upstream bandwidth can be set to suit the type of packets Upstream that the connection will be sending. The bandwidth can be Bandwidth maximized for voice packets and limited for data that requires less throughput. 15
Resumo do conteúdo contido na página número 17
Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DVG-1402S and may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address The IP address of the LAN interface. The default IP address is 192.168.15.1. Subnet Mask The subnet mask of the LAN interface. The default subne
Resumo do conteúdo contido na página número 18
Home > VoIP All of the screens necessary to setup and configure the router to handle VoIP traffic are accessed from the screen shown below. To access any of the individual configuration screens, click on the corresponding radio-button and that screen will appear. 17
Resumo do conteúdo contido na página número 19
Home > VoIP > Server Configuration The Router can be configured to handle voice signals over the Internet Protocol (Voice over IP − VoIP). The screen shown to the right, along with those on the following pages are used to configure your router to communicate with the devices that will send and receive telephone calls over the Internet. 18
Resumo do conteúdo contido na página número 20
Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP URL domain name is different from the SIP proxy server domain name. The phone will then use the domain name in Domain Name field as part of SIP URL but send and receive SIP messages through the SIP proxy server defined in the Service Domain field. IP Address Enter the IP address of the SIP Server in this field. Domain Name Enter the domain name
