Resumo do conteúdo contido na página número 1
Ultimate
Sensitivity
Extreme Low Light Camera SHC-750 User’s Manual
SALES NETWORK
• •
SAMSUNG TECHWIN CO., LTD. TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
Thank you for purchasing a SAMSUNG CCD CAMERA.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, 7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
Before attempting to connect or operate this product,
Gyeonggi-do 462-703, Korea TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145
p
Resumo do conteúdo contido na página número 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION -Th
Resumo do conteúdo contido na página número 3
Samsung Techwin cares for the environment at all product manufacturing Major Functions and Features stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, EMCCD for Extreme Light and indicates that the product satisfies the EU RoHS Directive. Motion Detection Sensitivity A 1/2 inch Electron Multiplying Charge The product’s Motion Detec
Resumo do conteúdo contido na página número 4
Contents Instructions: Camera Operation 20 Precautions 8 • Menu Functions 20 21 • Function Settings 10 Product Components 22 CAMERA ID 24 BACKLIGHT 26 WHITE BAL Names and Functions of Each Part 11 27 MOTION DET • Front 11 28 LENS SELECTION • Bottom 12 29 SHUTTER • Back 13 30 AUTO GAIN CONTROL 30 SENS-UP 32 SSNR 14 Instructions: Setup 33 SPECIAL • Lens 14 Using Auto Iris Lenses 35 Remote Control / MD Output / D&N Input Using C/CS Mount Lenses 36 Problems & Solutions Instructions: Connection 18
Resumo do conteúdo contido na página número 5
Precautions Installation of this product by unqualified If the camera overheats or smoke is Do not expose the product to extreme Do not use the product in areas where the personnel is strictly prohibited. noticed, turn the power off immediately. heat or cold. illumination levels fluctuate frequently. Experience and technical know-how are required It may cause fire. Do not expose the product to extreme heat or cold. Temperatures outside Fluctuating light levels caused by an unstable for proper in
Resumo do conteúdo contido na página número 6
Product Components Names and Functions of Each Part Front 1. 1/2 inch Ultra Low Light EM CCD SHC-750N Color Camera 2. Connector Plug for Auto Iris Lens 3. Remote Connector Plug 4. C-mount Adapter Groove for Tripod Mount Used to secure the camera case on a tripod mount: loosen the screws located on the bottom of the tripod and secure the camera to it. C-mount Lens Adapter Used for mounting a C-mount lens. 5. User Manual Back Focus Control Screw Adjusts back focus Auto Iris Lens Connector 6. DC
Resumo do conteúdo contido na página número 7
Names and Functions of Each Part Bottom Back Function Buttons Set button: For displaying the menu screen. Press to confirm selections or changes made. Up/Down button: For moving the screen cursor up/down to select menu items Groove for Tripod Mount Left/Right button: For moving the screen cursor left/right to change selected item values Used to mount the camera on a bracket or a tripod L The size of the screws for this groove is as follows. Power Lamp (ISO standard) The lamp turns on when th
Resumo do conteúdo contido na página número 8
Names and Functions of Each Part 3. Remove the cover from the lens connector jack and solder the cable to the jack pins. Auto Iris Lens Selection Switch Set to DC or Video according to the lens in use • Video type : • DC type : No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - Video Output Port No. 2 Pin --- N.C No. 2 Pin --- Damping + For video signal output; connects to a monitor video input port No. 3 Pin --- White (Video signal) No. 3 Pin --- Drive + No. 4 Pin --- Black (GND) N
Resumo do conteúdo contido na página número 9
Instructions: Setup • When using a C-mount lens When using a C/CS-mount lens 1. Remove the front glass protector from the product and fit a C-mount adapter by screwing it in clockwise. Check if the lens to be mounted is the C-mount or CS-mount type. The default setting of this camera is for a CS-mount lens, and minor adjustments are required before a C-mount lens can be used. • When using a CS-mount lens Remove the front glass protector from the product and fit a CS-mount lens by screwing the
Resumo do conteúdo contido na página número 10
Instruction: Connection Connecting a Monitor Connecting the Power Connect the video output port located on the back of the product to a monitor. Power requirements depend on the model; please check the product model number and its stated power requirements. The power connection method is as shown below. Using DC Power Use the adapter provided with this product. CCD Camera Monitor • The actual connection method depends on the peripherals; please refer to the manual of the device being connected
Resumo do conteúdo contido na página número 11
Instruction: Camera Operation Menu Functions Function Settings Use the 5 buttons located on the back of the product to set different functions. SETUP menu Up button Camera ID • OFF • ON Left button Right button Set button Down button Backlight • BLC • OFF WHITE BAL • ATW • AWC • MANUAL Motion Det • OFF • ON 1. Press the Set button to display the Main Setup menu on the monitor. Lens Selection • DC/VIDEO SETUP Shutter • A.FLK • MANUAL CAMERA ID OFF BACKLIGHT OFF WHITE BAL. ATW Auto Gain Control •
Resumo do conteúdo contido na página número 12
Instruction: Camera Operation Caution SETUP SETUP Use the Up/Down buttons to Use the Left/Right buttons to CAMERA ID OFF CAMERA ID OFF select an item. change the item value. BACKLIGHT OFF • If the current status is “OFF,” the camera ID will not BACKLIGHT OFF WHITE BAL. ATW be displayed on a monitor even if an ID is assigned. MOTION DET. OFF WHITE BAL. ATW LENS DC MOTION DET. OFF SHUTTER MANUAL AGC HIGH LENS DC SENS-UP OFF SSNR MIDDLE SHUTTER MANUAL SPECIAL EXIT AGC HIGH SENS-UP OFF SSNR MIDDLE
Resumo do conteúdo contido na página número 13
Instruction: Camera Operation 2. Press the Left/Right buttons to select the mode suitable for the camera’s purpose. ID will be displayed on the top left corner of FRONT DOOR the monitor. BLC: Delivers clearer images when the subject is in strong backlight. OFF: Canceled to Locate, then SET to Locate, then SET to Locate, then SET FRONT DOOR Use the 4 directional buttons to select a location for the ID to be displayed, and then press the BLC OFF Set button. 3. Press the Exit button when done. to
Resumo do conteúdo contido na página número 14
Instruction: Camera Operation White Bal Motion Det Use the White Balance feature for screen color control. This product generates a signal whenever motion is detected. Connecting an alarm device to the product, therefore, may increase security efficiency. Motion detection signals are output 1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to through the MD output port. “White Bal.” 1. After the Setup menu is displayed, press the Up/Down buttons to move the arro
Resumo do conteúdo contido na página número 15
Instruction: Camera Operation Caution Lens Selection • If an auto iris lens is used, the lens selection switch on the side of the product This feature controls the brightness of the screen. must be set either to DC or to Video accordingly. (See picture on p.15) 1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Lens.” • The brightness may be adjusted if a DC/Video lens is used; the adjustment range 2. The lens selected with the Auto Iris lens selection switch
Resumo do conteúdo contido na página número 16
Instruction: Camera Operation Auto Gain Control SETUP CAMERA ID OFF 1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “AGC.” BACKLIGHT OFF 2. Press the Left/Right buttons to select a mode. As the Gain level increases, the screen WHITE BAL. ATW becomes brighter and noise level increases. MOTION DET. OFF High : Gain automatically changes from 0 up to the maximum of 60dB. LENS DC Low : Gain automatically changes from 0 up to the maximum of 54dB. SHUTTER MANUAL Of
Resumo do conteúdo contido na página número 17
Instruction: Camera Operation SSNR Special Low light noise is reduced in different ways depending on the mode; the noise reduction level changes from none to maximum as the mode changes from Off to Low, Middle, and High. 1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “SSNR.” SETUP CAMERA ID OFF BACKLIGHT OFF 1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Special.” WHITE BAL. ATW 2. Press the Left/Right buttons to sele
Resumo do conteúdo contido na página número 18
Instruction: Camera Operation Remote Control / MD Output / D&N Input To Remotely Control Function Buttons: Connect a remote jack to the Remote port located Caution on the back of the product and wire it as shown below. External device (e.g. computer) buttons may act identically to the camera buttons, and perform the same functions. • When using a video auto iris lens and if the lens level is set to low, automatic switching between Color mode and B/W mode may not work properly. • When the Gain m
Resumo do conteúdo contido na página número 19
Problems & Solutions Product Specification If you suspect a product malfunction, please check the suggestions below. If the problem NTSC (SHC-750N) PAL (SHC-750P) persists, consult the authorized retailer where this product was purchased. POWER DC 12V ( 10%) / 16.8W Total Pixels 680(H) x 500(V) Problem Solution C C Effective Pixels 658(H) x 496(V) Screen is blank. • Check if the power is connected and flowing properly. D Size 1/2" inch TI EM-CCD • Check if the video cables are connected properl
Resumo do conteúdo contido na página número 20
Protocol Command Description Byte1 Byte2 Byte3 Byte4 || Byte5 Byte6 Byte7 Byte8 Byte9 Byte10 Byte11 Command Name Function Command Packet STX CAM ID HOST ADDR Command Data3 Data4 Data5 Data6 ETX CHECK SUM Return Packet STX CAM ID HOST ADDR Response Data3 Data4 Data5 Data6 ETX CHECK SUM Function Display OSD menu on the screen. OSD Menu On/Off Clear OSD menu and save current menu setup. Command Packet A0h CAM ID HOST ADDR 00B1h P1 00h 00h 00h AFh CHECK SUM Return Packet A0
