Resumo do conteúdo contido na página número 1
INSTALLATION, USE & CARE MANUAL
FREESTANDING GAS RANGES
DIMENSIONS: 48’’ (1220 mm)(W) x 253/16’’ (640 mm)(D) x36’’ (915 mm)(H)
Model MAS486GGASXT [MTYKQPA7X5AUA]
310829
1
Resumo do conteúdo contido na página número 2
From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of our beautiful PRO ranges. We know that you have many brands and products to choose from and we are thrilled that you have decided to take onw of your products into your home. We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882. Each of BERTAZZONI SpA our products is a blend of Ital
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS WARRANTY AND SERVICE ............................................................................................................ 4 CUSTOMER SERVICE ....................................................................................................................................................... 4 REPLACEMENT PARTS .................................................................................................................................................... 4 IMPO
Resumo do conteúdo contido na página número 4
WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labor warranty. Service on all Bertazzoni products shall be carried out by factory‐trained professionals only. For warranty service please contact Customer Service at the numbers indicated below. CUSTOMER SERVICE English/spanish hotline (866) 905‐0010 French (800) 561‐7625 Fax (714) 428‐0040 Email BERTAZZONIHELP@SERVICEPOWER.COM Mailing address SERVICEPOWER 1503 South Coast drive Suite
Resumo do conteúdo contido na página número 5
WARNING! IMPORTANT SAFETY INFORMATION Read this instruction booklet before installing PLEASE READ AND FOLLOW THESE IMPORTANT and using the appliance. INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF THE PEOPLE LIVING IN IT. The manufacturer will not be responsible for any damage to property or to persons caused by Save this Manual for local electrical inspector’s incorrect installation or improper use of the use. appliance. Read and save these instructions for future The manufac
Resumo do conteúdo contido na página número 6
PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and back Weight Burner power Natural gas LP gas Auxiliary 3750 BTU/h 3750 BTU/h Semi‐rapid 6000 BTU/h 6300 BTU/h Rapid 10400 BTU/h 11400 BTU/h Dual burner (inner) 2730 BTU/h 2900 BTU/h Dual burner ( outer) 15000 BTU/h 16400 BTU/h Oven (left cavity) 14500 BTU/h 14500 BTU/h Broiler (left cavity) 12000 BTU/h 12000 BTU/h Oven (right cavity) 7000 BTU/h 7000 BTU/h 6
Resumo do conteúdo contido na página número 7
BEFORE INSTALLATION WARNING! This appliance shall only be installed by an authorized professional. Do not use aerosol sprays in the vicinity of this appliance while it is in operation This appliance shall be installed in accordance with the manufacturer’s installation instructions. ROOM VENTILATION: An exhaust fan may be used with the appliance; in each case it shall be This appliance must be installed in accordance installed in conformity with the app
Resumo do conteúdo contido na página número 8
INSTALLING THE LEGS INSTALLING THE WORKTOP FRONTGUARD Bertazzoni ranges must be used only with the legs properly installed. To increase the clearance between the front edge of the worktop and the burners it is possible to Four height‐adjustable legs are shipped with the install the worktop frontguard shipped with the range in the polysterene container situated over appliance. the appliance. To install the front guard, hold it with the pointed Before installing the legs, position t
Resumo do conteúdo contido na página número 9
Install the front part of the backguard by INSTALLING THE BACKGUARD tightening the 2 central screws from the top and The backguard must be installed prior to 2 lateral screws from the bottom. operation of the appliance for appropriate ventilation of the oven compartment. The supplied backguard is a 2‐part assembly. The box also contains a set of metal screws for securing the backguard to the worktop. Position the back part of the backguard and Disa
Resumo do conteúdo contido na página número 10
INSTALLATION REQUIREMENTS INSTALLING THE ANTI‐TIP STABILlTY DEVICE ELECTRICAL The anti‐tip bracket shipped with the range must be properly secured to the rear wall as shown in A properly‐grounded horizontally‐ mounted the pircture below. electrical receptacle should be installed no higher The height of the bracket from the floor must be than 3" (7.6 cm) above the floor, no less than 2” determined after the range legs have been (5 cm) and no more than 8” (20,3 cm) from the adjus
Resumo do conteúdo contido na página número 11
EXHAUST HOOD INSTALLATION This range will best perform when used with PRO INSTALLATION ADJACENT TO KITCHEN line Bertazzoni exhaust hoods. These hoods have CABINETS been designed to work in conjunction with the This range may be installed directly adjacent to Bertazzoni range and have the same finish for a existing countertop high cabinets (36" or 91.5 cm perfect look. from the floor). For maximum performance, the height of the For the best look, the worktop should be level
Resumo do conteúdo contido na página número 12
WARNING! ELECTRICAL SHOCK HAZARD ELECTRICAL CONNECTION Disconnect electrical power at the circuit This unit is manufactured for a polarized, breaker box or fuse box before installing the grounded 120 volt/60 Hz, 16 amp system. appliance. Electric power consumption is about 1200 W. Provide appropriate ground for the appliance. The minimum of 102 VAC is required for proper Use copper conductors only. operation of gas ignition systems. Failure to follow these instructions co
Resumo do conteúdo contido na página número 13
MANUAL SHUT‐OFF VALVE GAS CONNECTION THIS VALVE IS NOT SHIPPED WITH THE APPLIANC All gas connections must comply with national AND MUST BE SUPPLIED BY THE INSTALLER. and local codes. The gas supply line (service) The manual shut‐off valve must be installed in must be the same size or greater than the inlet the gas service line between the gas hook‐up on line of the appliance. This range uses a 1/2" NPT the wall and the appliance inlet, in a position inlet (see drawing below for detai
Resumo do conteúdo contido na página número 14
PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. The pressure regulator shipped with the appliance has has two female threads ½” NPT. The regulator shall be installed properly in order to be accessible when the appliance is installed in its final position. Manifold pressure should be checked with a
Resumo do conteúdo contido na página número 15
STEP 1: PRESSURE REGULATOR GAS CONVERSION The pressure regulator supplied with the appliance is a convertible type pressure regulator WARNING! for use with Natural Gas at a nominal outlet Before carrying out this operation, disconnect pressure of 4” w.c. or LP gas at a nominal outlet the appliance from gas and electricity. pressure of 11” w.c. and it is pre‐arranged from the factory to operate with one of these Gas conversion shall be conducted by a factory‐ gas/pressure as indica
Resumo do conteúdo contido na página número 16
STEP 3: MAIN OVEN BURNER STEP 2: SURFACE BURNERS To replace the nozzles of the main oven burner, To replace the nozzles of the surface burners, lift start by removing the bottom panel of the oven. up the burners and unscrew the nozzles shipped with the range using a 7 mm {sochet wrench). Replace nozzles using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body.
Resumo do conteúdo contido na página número 17
Left oven Unscrew the nozzle located inside the gas fitting using a 7 mm [ socket wrench]. Replace the nozzle using the conversion set Left oven supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 20 for matching nozzles to burners. Do not need air adjustment on the oven burner. Right oven Right oven 17
Resumo do conteúdo contido na página número 18
STEP 5: VISUAL CHECKS STEP 4: BROILER BURNER Before reinstalling the bottom panel, the Loosen the screw and pull out the burner from its following visual check must be performed to support. ensure that the conversion has been carried out ATTENTION: pay extra attention to avoid damage properly and without damage to other to the igniter and thermocouple. components of the range. A) CONNECTION OF THERMOCOUPLES TO THERMOSTAT The thermocouples for both broiler and main oven burner ar
Resumo do conteúdo contido na página número 19
OVEN BURNER 1. Set the oven temperature control knob to the MAXIMUM setting. 2. Close the oven door and operate the oven for at least 10 minutes. 3. Set the knob to the MINIMUM setting Remove the knob. 4. With a slotted screwdriver turn the choking screw (by‐pass screw at the left side of the thermostat bar) and, while observing the flame at the same time through the bottom After performing all these visual checks, reinstall oven porthole, evaluate the consisten
Resumo do conteúdo contido na página número 20
Model MAS48 6G GAS XT [MTYKQPA7X5AUA] Burner Position Injector Gas Pressure Max Rate Min Rate By-pass diam. [mm.] Type [i.w.c.] [BTU/h] [W] [BTU/h] [W] diam. [mm] Auxiliary Front R Regulated 0,92 NG 4" 3750 1098 900 264 0,29 0,56 LP (Propane) 11” 3750 1098 900 264 Semi-Rapid Rear L & C Regulated 1,17 NG 4” 6000 1759 1500 439 Front C 0,36 0,73 LP (Propane) 11” 6300 1845 1500 439 Rapid Rear R Regulated 1,55 NG 4” 10400 3046 2500 732 0,47 0,98
