Resumo do conteúdo contido na página número 1
HIGH SENSITIVITY COLOR CAMERA
INSTRUCTION MANUAL
SHC-730N/P
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SALES NETWORK
• SAMSUNG TECHWIN CO., LTD. • SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)
Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong, Closed Circuit Division 40 Seaview Drive, Secaucus N.J 07094,
Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-703 U.S.A
TEL : 82-31-740-8137~41 FAX: 82-3
Resumo do conteúdo contido na página número 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION -Th
Resumo do conteúdo contido na página número 3
Features Warning The camera needs periodic inspection. Fine Picture in Ultra Low Day & Night illumination. Contact an authorized technician for inspection. The camera provides automatic mode SV-III built-in DSP and 1/3 high density change over by sensing day or night CCD allows bright and high quality conditions. It can change color mode in images to be captured in ultra low light Stop using your camera when you find a malfunction. condition. the day condition for optimal color and - 0.13Lux at
Resumo do conteúdo contido na página número 4
Contents 8 21 Precautions Operating Your Camera Configuration of The Menu 21 Composition 10 Setting Up The Menu 22 • CAMERA ID 23 • BACKLIGHT 26 Name and Function of Each Part 11 • WHITE BALANCE 27 Front 11 • MOTION DETECTION 28 12 Side • LENS SELECTION 30 Bottom 13 • SHUTTER SPEED CONTROL 32 Back 14 • AGC 34 • SENSE UP 35 • SSNR 36 15 Connection 37 • SPECIAL Lens 15 • Installing Auto Iris Lens 40 Using Reomte Jack / MD Output / D&N Input • Installing C/CS-Mount Lens 42 Troubleshooting Connectin
Resumo do conteúdo contido na página número 5
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. Only use the camera under conditions It can cause the image quality to be poor. It can cause malfunctions to occur. It can damage the CCD. where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when
Resumo do conteúdo contido na página número 6
Composition Name and Function of Each Section Front 1. High Sensitivity Color Camera C-Mount Lens Adapter Used to attach C-mount lens. Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera. 2. Auto Iris Lens Plug 3. Remote Plug 4. C-Mount Adapter 5. Instruction Manual Back Focus Adjustment Lever Used to adjust back focal length COLOR CCD CAMERA User’s Manual COLOR CCD CAMERA User’s Manual 10 11
Resumo do conteúdo contido na página número 7
Name and Function of Each Section Side Bottom BACK FOCUS ADJUSTMENT LEVER Tripod Mounting Hole When you don’t obtain focused point after adjusting lens focus, Used to install the camera on an optional adjust the lever. tripod. The tripod must be equipped with the screw specified as shown below. Auto Iris Lens Connector Used to connect Auto Iris Lens plug. 1/4"-20 UNC (20 THREAD) L DC/VIDEO Selection Switch L:4.5mm±0.2mm (ISO standard), Used to choose DC or VIDEO according to the or 0.197" (AS
Resumo do conteúdo contido na página número 8
Name and Function of Each Section Connection LENS Back The lens is not supplied with this camera. Purchase a lens suitable for your Video Output Jack Power LED environment. This camera accepts the auto iris lens and both C-and Used to connect an external The LED turns on CS-mount lens. video monitor in jack. when power is supplied. Notes Remote Jack If the lens is marked with fingerprints or other marks, the image quality might be poor. It is recommended to use a high quality lens to improve
Resumo do conteúdo contido na página número 9
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens Installing C/CS-Mount lens cable to the plug as shown below. Before mounting a lens, please check whether it is a C-mount or CS-mount lens. • Video type : • DC type : No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - The back focus is set for the CS-mount lens at the factory. No. 2 Pin --- N.C No. 2 Pin --- Damping + • Mounting a CS-Mount lens No. 3 Pin --- White (Video signal) No. 3 Pin --- Drive +
Resumo do conteúdo contido na página número 10
Connection • Mounting a C-Mount lens Connecting to Monitor 1. Attach the C-Mount lens adapter by turning clockwise. Connect the VIDEO Out jack to the monitor VIDEO In jack. CCD Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • If necessary, you can connect the monitor to the REMOTE jack on the back 2. Attach the lens to the camera by turning clockwise. of your camera. For details, see page 40. • Only connect the cable when
Resumo do conteúdo contido na página número 11
Connection Operating Your Camera Connecting to Power Configuration of The Menu Each model has different power specification. Please check the name of the SETUP MENU CAMERA ID model and power specification before connecting to power source. • OFF • ON BACKLIGHT For AC / DC Power Type • WDR • OFF • The wire is polarized. Be sure to connect the wire that white line is on covering WHITE BAL. to ‘-’ terminal and connect the other one to ‘+’ terminal. • ATW • AWC • MANUAL • Use AC
Resumo do conteúdo contido na página número 12
Operating Your Camera SETUP Setting Up The Menu CAMERA ID OFF Change the status using Select the function using the UP or DOWN button. BACKLIGHT WDR the LEFT or RIGHT button. Use the five Setup Menu buttons on side of the camera. WHITE BAL. ATW MOTION DET. OFF LENS DC SHUTTER ESC AGC MIDDLE SENSE UP AUTO SSNR MIDDLE SPECIAL UP button EXIT LEFT button SET button 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' a
Resumo do conteúdo contido na página número 13
Operating Your Camera 3. Press SET button. 5. Select the position at which the camera ID will be located on the screen. Move the cursor to 'Pos' and press SET button. Camera ID ABCDEFGHIJKLM Camera ID NOPQRSTUVWXYZ ABCDEFGHIJKLM abcdefghijklm NOPQRSTUVWXYZ nopqrstuvwxyz abcdefghijklm -. 123456789 nopqrstuvwxyz CLR POS END -. 123456789 CLR POS END 4. You can enter up to 15 characters. The camera ID is displayed on the top-left of the monitor screen. (Default Move the cursor to character-enter l
Resumo do conteúdo contido na página número 14
Operating Your Camera Notes Backlight • If you select manual in ‘shutter’ menu, you can’t use WDR mode. SV-III DSP chip built-in provides intelligent light level control to overcome • If you select WDR mode, the following phenomenon may appear by lighting the severe Backlight conditions. condition. In these cases do not select WDR mode. 1. Press the SET button to display the setup menu and move the arrow Unnatural color change or unnatural phenomenon on the screen indicator to ‘Backlight’ using
Resumo do conteúdo contido na página número 15
Operating Your Camera AWC(Auto White balance Control): The white balance is automatically adjusted 2. Set ‘Motion Det.’ to the ON mode using LEFT or RIGHT button. in a specific environment. In order to obtain the best result, press the SET button while SETUP the camera focuses on white paper. If the environment including the light source is CAMERA ID OFF changed, you have to adjust the white balance again. BACKLIGHT WDR WHITE BAL. ATW Manual: To fine adjust, select the Manual mode. You can incr
Resumo do conteúdo contido na página número 16
Operating Your Camera · When completed, press END button. DC / Video: When using auto iris lens Notes SETUP CAMERA ID OFF Tips on Using the Motion Detection Feature BACKLIGHT WDR WHITE BAL. ATW • After selecting zone and sensitivity, perform a test operation to make sure it MOTION DET. OFF works properly. LENS DC • If the lighting flickers, the motion detection feature might not work properly. SHUTTER ESC • The object should occupy 10% or more of its zone. The bigger the object, the higher sensi
Resumo do conteúdo contido na página número 17
Operating Your Camera Manual: When using manual lens • You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’ to ‘1/120,000’sec (PAL Models). Notes * It is possible to adjust Sens-Up(x2 ~ x128) mode manually. • When the auto iris lens is mounted, you have to set the DC/Video selection • When the shutter speed is increased or decreased using the LEFT or RIGHT switch on the side of the camera properly according to the type of the lens. The button, you can find the difference by m
Resumo do conteúdo contido na página número 18
Operating Your Camera AGC (Auto Gain Control) Sense up To get brighter picture. You can always get the clear image with this function under night or low- lighting level. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘GAIN’ using the UP or DOWN button. 1. Press the SET button to display the setup menu and move the arrow indicator to 'Sense up' using the UP or DOWN button. 2. Set ‘gain’ to desired mode using the LEFT or RIGHT mode. 2. Set ‘Sense up’ to the desi
Resumo do conteúdo contido na página número 19
Operating Your Camera SSNR(Samsung Super Noise Reduction) SPECIAL To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button. 2. Set ‘SSNR’ to desired mode using the LEFT or RIGHT mode. LOW: low reduction of the noise MIDDLE: middle reduction of the noise HIGH: high reduction of the noise OFF: Deactivation 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SPECIAL’ usin
Resumo do conteúdo contido na página número 20
Operating Your Camera PRIVACY: To mask area which you want to mask Notes - OFF: Deactivation • When you use Auto Iris Lens with Video type, do not set the level on the lens to too - ON: Privacy mode activated low, Color/BW may not change over automatically. · Press the SET button. • When Gain in SET UP menu is OFF, Color / BW do not change over automatically. • If AGC is OFF, you can’t select AUTO mode on DAY/NIGHT menu. • For the stable operation, whenever the mode is changed over between color
