Resumo do conteúdo contido na página número 1
Electromagnetic Inductive
RFID System
V720-series
User’s Manual
Long-Range Antenna
V720-HS04
Manual Number SRFM-006A
Resumo do conteúdo contido na página número 2
About this Manual: Thank you for purchasing our V720-series Electromagnetic Inductive RFID System. The V720-series is a family of products that were developed by fully utilizing our high technology and broad experience. This Users Manual provides various information that will be necessary when using the V720-HS04 Antenna (hereinafter called the "Antenna"), including the functions and performance of the Antenna and how to use it. When you actually use the V720-series product, please make s
Resumo do conteúdo contido na página número 3
’ iii
Resumo do conteúdo contido na página número 4
iv
Resumo do conteúdo contido na página número 5
Safety Precautions This chapter provides important information for the safe use of this product. Ensure to read the information carefully before use. In the safety precautions below, severity is categorized as either ”WARNING” or “CAUTION”. Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, or may result in serious WARNING injury or death. Additionally there may be significant property damage. Indicates a potentially ha
Resumo do conteúdo contido na página número 6
WARNING Never disassemble, repair, or modify the main unit and cables. Do not disassemble, repair, or modify this product. Doing so may result in electric shock, fire, or personal injury. Do not handle the device with wet hands. Do not touch the terminals while the device is connected to the power supply. Electric shock hazard. Do not allow the cables to be in contact with heaters. The cable sheaths may melt and the exposed wire may cause electric shock or fire. Be sure to connect
Resumo do conteúdo contido na página número 7
Locations where the Reader/Writer is exposed to dust, corrosive gas, saline, or flammable gas. Locations where the Reader/Writer is exposed to direct heat. Locations subject to condensation due to high humidity. Locations subject to vibration or impact that exceed the limits outlined in the specifications. Locations where the device may be exposed to water, oil, or chemical agents. (This applies to the models other than waterproof types.) Outdoor Be sure to tighten the devic
Resumo do conteúdo contido na página número 8
Precautions This chapter provides important information for international standards and copyright. Ensure to read the information carefully before use. Declarations V720-HS04 conforms to the following laws and standards. This conformity is effective only if V720-HS04 is used with the designated Reader/Writer, V720-BC5D4A or V720-BC5D4A-US. 1) European Standards (R&TTE Directive) Radio : EN 300 330-1,2 EMC : EN 301 489-1,3 Safety : EN61010 2) US standards (applicable
Resumo do conteúdo contido na página número 9
TABLE OF CONTENTS SECTION 1 Characteristics .................................................................1-1 1-1 Features ....................................................................................................................1-2 SECTION 2 Specifications and Performance ......................................2-1 2-1 Antenna.....................................................................................................................2-2 2-1-1 Nomenclature ............
Resumo do conteúdo contido na página número 10
SECTION 1 Features 1-1 Features .............................................................................................................1-2 1-1
Resumo do conteúdo contido na página número 11
1-1 1-1 Features The V720–series Electromagnetic Inductive RFID System is ideal for the construction of highly functional, long–distance wireless ID systems for material control and logistics. The V720-HS04 Antenna is used by connecting it to the V720S-BC5D4A Reader/Writer using a coaxial cable with a special impedance of 50 Ω. Long-Range antenna V720 V720 - - HS04 HS04 Long-Range Reader/Writer V720S-BC5D4A-US V720S-BC5D4A Antenna
Resumo do conteúdo contido na página número 12
SECTION 2 Specifications and Performance 2-1 Antenna..............................................................................................................2-2 2-1-1 Nomenclature.................................................................................................2-2 2-1-2 Specifications..................................................................................................2-2 2-1-3 Dimensions.................................................................
Resumo do conteúdo contido na página número 13
2-1 Antenna 2-1 2-1 Antenna 2-1-1 Nomenclature • V720-HS04 2 1 No Name Description Connects the V720S-BC5D4A Reader/Writer to the Antenna 1 BNC connector connector for sending/receiving and to the exclusive coaxial cable (sold separately). Surface for communication with Tag 2 Detection surface Antenna coils are arranged along the rectangular frame. 2-1-2 Specifications General Specifications Item Specifications Resonance frequency 13.56MHz Ambient operating te
Resumo do conteúdo contido na página número 14
2-1 Antenna 2-1 2-1-3 Dimensions • V720-HS04 Unit: mm • PVC Casing material Back board PVC 2-3 Mou Mount ntiin ng h g ho olle e
Resumo do conteúdo contido na página número 15
2-1 Antenna 2-1 2-1-4 Cable (Sold separately) General specifications Model V720-A41 Item Antenna cable Cable type Coaxial cable 2 (shield) No. of leads 10M Ω or more between terminal and coating Insulation resistance (with DC250V Mega) AC300V/1min Withstand voltage Leak current: 1mA or less Coating material PVC Outer dimensions Model V720-A41 3.35M V720-A41 10.33M Item 3350 +20-30(mm) 10330+20-30(mm) Length (L1) Connection label L1 Connector (Reader/Writer side)
Resumo do conteúdo contido na página número 16
SECTION 3 Installation 3-1 Installation of Antenna......................................................................................3-2 3-1-1 Installation Environment ................................................................................3-2 3-1-2 Mounting the Antenna .....................................................................................3-3 3-1
Resumo do conteúdo contido na página número 17
3-1 Installation of Antenna 3-1 3-1 Installation of Antenna 3-1-1 Installation Environment Installation Location It is assumed that this product is to be used indoors, or outdoors if there is a roof. Do not install the Antenna in the following locations. • Place exposed to direct sunlight. • The ambient temperature is not within a range between 10°C and 55°C or locations with radical temperature changes resulting in condensation. • The humidity is not within a range between 35% a
Resumo do conteúdo contido na página número 18
( (H Ho olle e) ) 3-1 Installation of Antenna 3-1 3-1-2 Mounting the Antenna Be sure to attach the provided bracket to the Antenna and mount the Antenna with four M6 screws with spring washers and flat washers as shown below. Spring washer Flat washer • Mounting Dimensional Drawing Mount the Antenna at least 50cm away from the flat metal plate. If the Influence of peripheral Antenna is mounted only 20cm away, the communication distance will be metals during Antenna 90% of t
Resumo do conteúdo contido na página número 19
SECTION 4 Reference Data 4-1 Communications Areas .........................................................................................4-2 4-2 Influence of Peripheral Metals at Antenna Installation......................................4-5 4-3 Influence of Tag Angle...........................................................................................4-3 4-4 Effects of Materials on Tags..................................................................................4-4 4-
Resumo do conteúdo contido na página número 20
4-1 Communications Areas 4-1 4-1 Communications Areas The following diagram shows the communication area available when a standard Tag is used at ambient temperature, 25°C. The communication area varies depending on Antenna installation conditions, Tag forming conditions, Tag installation conditions and ambient temperature; therefore, verify the communication area beforehand. Since the coil in the Antenna is more or less rectangular (316mm×265mm), the horizontal communication distance
