Resumo do conteúdo contido na página número 1
Table of Contents
Table of Contents ......................................................................................... 1
Usage Notice ................................................................................................ 2
Precautions ..........................................................................................................2
Introduction .................................................................................................. 4
Product Features .........
Resumo do conteúdo contido na página número 2
Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fi re or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow
Resumo do conteúdo contido na página número 3
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventila- tion. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to excessi
Resumo do conteúdo contido na página número 4
Introduction Product Features Congratulations and Thank You for choosing an EP7150 pro- jector, an Optoma Product. This product is a XGA single chip TM 0.55” DLP projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels TM Texas Instruments Single chip DLP Technology NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) Multi-Auto functions: Auto detection, Automatic saving of user adjustments IR remote control with laser po
Resumo do conteúdo contido na página número 5
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Composite Video Cable SCART VGA/S-Video Wireless Remote 1.8m Controller Adaptor Due to the differ- (available in European ence in applications region only) for each country, some regions may have different ac- cessories. 2 x AA Batteries Carry Bag D
Resumo do conteúdo contido na página número 6
Introduction Product Overview Main Unit 2 1 3 4 5 6 7 8 2 1 9 1. Control Panel 2. Zoom Lever 3. Power Socket 4. Speaker 5. Elevator Button 6. Zoom Lens 7. Focus Ring 8. IR Receivers 9. Connection Ports 6 English
Resumo do conteúdo contido na página número 7
Introduction Control Panel 4 3 2 1 5 6 7 8 9 1. Enter 5. Source Select 2. Menu (On/Off) 6. Resync 3. Power 7. Power LED 4. Four Directional Select 8. Lamp Indicator LED Keys 9. Temp Indicator LED Connection Ports 6 5 4 3 2 1 1. VGA-In SCART Connector (PC Analog signal/SCART RGB/HDTV/Component Video Input) 2. Composite Video Input Connector 3. S-Video Input Connector 4. Audio Input Connector 5. Service Connector TM 6. Kensington Lock Port 7 English
Resumo do conteúdo contido na página número 8
Introduction Remote Control with Laser Pointer 1. Laser Button 8 1 2. Four Directional Select Keys 9 2 3. Keystone +/- 4. Page Up 5. Page Down 3 6. Source Select 7. Freeze 4 10 8. Power 9. Menu 11 5 10. Enter 11. Mute 12. Resync 6 12 13. Hide 7 13 8 English
Resumo do conteúdo contido na página número 9
Installation Connecting the Projector RGB 1 2 Due to the differ- ence in applications 1 for each country, some regions may 7 have different acces- 5 sories. S-Video Output 4 6 3 Video Output DVD Player, Settop Box, HDTV receiver 1. ..............................................................................................................VGA Cable 2. ...........................................................Audio Input Cable (Optional Accessory) 3. ....................................
Resumo do conteúdo contido na página número 10
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will fl ash green. 3. Turn on the lamp by pressing “Power” button on the control panel. And the Power LED will turn green. 4. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically within “Management” menu; check that “Source Lock” has been set to “Off
Resumo do conteúdo contido na página número 11
Installation Powering Off the Projector 1. Press the “Power” button to turn off the projector lamp; you will see a message displayed on the projector’s screen. Press the “Power” but- ton again to confi rm, otherwise the message will disappear after 5 seconds. Please note that if the key is pressed instead, the projec- tor will enter the “Picture Mute” mode and no image will be displayed. To exit the “Picture Mute” mode, press the “Power” button again. 2. The cooling fans continu
Resumo do conteúdo contido na página número 12
Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. 3. Use screw in feet to fi ne-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the eleva- to
Resumo do conteúdo contido na página número 13
D i a g o n a l Installation Adjusting the Projector Zoom / Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The pro- jector will focus at distances from 4.9 to 39.4 feet (1.5 to 12.0 meters) with mechanical travel. Zoom Lever Focus Ring Adjusting Projection Image Size 304. 9" ( 774.5c m ) 228. 7" ( 580.9c m ) 177.9 " ( 451. 8c m ) 127.1" W i d t h 277. 3" ( 322. 7cm ) ( 704.4c m ) 208.0" 76.2" ( 528.3c m ) ( 193.6cm )
Resumo do conteúdo contido na página número 14
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel 1 2 Refer to the “Power On/Off the Projector” section Power on pages 10-11. Press “Source” to select an input signal. 1 Source Turns the menu On or Off. Menu Four Direc- Use to navigate through the menus. tional Select Keys Enter Confi rm your item selection. Automatically synchronizes the projector to the 2 Resync input source.
Resumo do conteúdo contido na página número 15
User Controls Using the Remote Control Refer to the “Power On/Off the Projector” section Power on pages 10-11. Automatically synchronizes the projector to the Resync input source. Aim the remote at the viewing screen, press and Laser Button hold this button to activate the laser pointer. Press “Source” to select an input signal. Source Adjusts image distortion caused by tilting the Keystone projector (±16 degrees). Momentarily turns off the audio. Mute Momentarily turns off the picture. Hi
Resumo do conteúdo contido na página número 16
User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press key to enter sub menu. 3. Use keys to selec
Resumo do conteúdo contido na página número 17
User Controls Menu Tree 17 English
Resumo do conteúdo contido na página número 18
User Controls Language Language Choose the multilingual OSD menu. Use the or key to select your preferred language. Press “Enter” to fi nalize the selection. 18 English
Resumo do conteúdo contido na página número 19
User Controls Image-I Display Mode There are many factory presets optimized for various types of im- ages. PC: For computer or notebook. (brightest image) Movie: For home theater. sRGB: For standard PC color. (best color reproduction) Bright: For bright mode. User: Memorize user’s settings. Brightness Adjust the brightness of the image. Press the to darken image. Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightes
Resumo do conteúdo contido na página número 20
User Controls mum peaking. If you prefer a brighter image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Color Temp. Adjusts the color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. 20 English
