Resumo do conteúdo contido na página número 1
E
DATA PROJECTOR
*
XJ-M140/XJ-M145
*
XJ-M150/XJ-M155
*
XJ-M240/XJ-M245
*
XJ-M250/XJ-M255
* USB Port Models
User’s Guide
Be sure to read the precautions in the separate Setup Guide. For
details about setting up the projector, see the Setup Guide.
Be sure to keep all user documentation handy for future
reference.
Resumo do conteúdo contido na página número 2
DLP is a registered trademark of Texas Instruments of the United States. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. XGA is a registered trademark of IBM Corporation of the United States. PJLink is a trademark applied for registration or is already registered in Japa
Resumo do conteúdo contido na página número 3
Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Operation During Projection .
Resumo do conteúdo contido na página número 4
Configuring Advanced Projector Settings.................. 20 Basic Setup Menu Operations .............................................................20 Displaying the Setup Menu........................................................................................ 20 Configuring Setup Menu Settings.............................................................................. 20 Basic Setup Menu Example....................................................................................... 21 Di
Resumo do conteúdo contido na página número 5
Appendix ........................................................................ 43 Connecting to a Video Device..............................................................43 Connection to a composite video output or S-video output ..................................... 43 Connection to a component video output................................................................. 44 Connecting the HDMI Output of a Video Device or Computer to the Projector...........................................
Resumo do conteúdo contido na página número 6
Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-M140/XJ-M145/XJ-M150/XJ-M155/XJ-M240/XJ-M245/XJ-M250/XJ-M255 A laser and LED hybrid light source provides high brightness of 2,500 to 3,000 lumens along with low power consumption and low heat generation. A wide selection of input sources: Analog RGB, composite video, S-video, component video (Y·Cb·Cr, Y·Pb·P
Resumo do conteúdo contido na página número 7
XJ-M145/XJ-M155/XJ-M245/XJ-M255 Projection of Data from USB Memory or a Memory Card without a Computer: USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projector’s USB port. The projector comes with special software for converting PowerPoint presentation data to a format that can be stored to USB memory or a memory card and projected without using a computer. Images and movies also can be projected directly from USB memory or a m
Resumo do conteúdo contido na página número 8
Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector. Remote Controller Keys Remote control signal emitter [INPUT] key CLASS 1 LED PRODUCT [MENU] key [P] (Power) key [ESC] key [FUNC] key Cursor keys ( / / / ) [AUTO] key [ENTER] key ([STYLE] key) [BLANK] key [FREE
Resumo do conteúdo contido na página número 9
Back Terminals 1 23 456 7 8 9bk bl bm bn bo 1 USB port (XJ-M145, XJ-M155, XJ-M245, XJ-M255 only) 2 LAN port (XJ-M145, XJ-M155, XJ-M245, XJ-M255 only) 3 COMPUTER IN terminal 4 HDMI port 5 VIDEO terminal 6 S-VIDEO terminal 7 Remote control signal receiver 8 SERIAL port* 9 AUDIO IN terminal bk AUDIO OUT terminal bl AUDIO IN L/R terminals bm Anti-theft lock hole bn Speaker bo Power connector * This terminal is for controlling the projector from an external device. It normally is not used. For infor
Resumo do conteúdo contido na página número 10
Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key. This displays the input source selection screen. 2. Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project. For details about the 3D Input Mode, see the explanation in the following section. 3. Use the
Resumo do conteúdo contido na página número 11
Entering the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Select Computer (RGB), S-video, or Video as the input source. 3. Use the [ ] and [ ] keys to move the highlighting to “To 3D input mode” and then press the [ENTER] key. This enters the 3D input mode and closes the input source selection screen. Important! You cannot select HDMI or USB as the input source in the 3D input mode. To use either of these input sources, change the input source set
Resumo do conteúdo contido na página número 12
Image Operations During Projection You can perform the following operations while projecting an image. Image brightness adjustment Color mode selection Image zooming Momentary cut off of the input source image and projection of a black or blue screen, or a logo Image freeze Pointer display in the projected image Aspect ratio switching Adjusting Image Brightness Note (for USB port model users) Use the setup menu (page 20) to adjust image brightness when the input source is an external dev
Resumo do conteúdo contido na página número 13
Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important! The color mode cannot be selected in the following cases. When “Off” is selected for the Eco Mode setting (page 18) When the projector is in the 3D input mode. See “3D Input Mode” (page 10). To change the color mode 1. Press the [COLOR MODE] key. This displays the color mode selection window. The currently selected color mode is the
Resumo do conteúdo contido na página número 14
Momentarily Cutting Off the Input Source Image 1. Press the [BLANK] key. This temporarily cuts off the image from the input source and projects a black screen in its place. 2. To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 32. Freezing an Image Pressing the [FREEZE] key freezes the projected imag
Resumo do conteúdo contido na página número 15
Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zer
Resumo do conteúdo contido na página número 16
Changing the aspect ratio of the projected image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings depend on your projector model as shown below. For details about the meaning of each setting, see the “Aspect Ratio” setting under “Screen Settings Main Menu” on page 31. XJ-M240/XJ-M245/XJ-M250/XJ-M255 Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as shown below. Input Source Pressing
Resumo do conteúdo contido na página número 17
Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker. To adjust the volume level 1. Press the [VOLUME] key. This causes the [Volume] screen to appear on the projected image. 2. Press the [ ] key to increase the volume, or the [ ] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key. This causes the [Volume] screen to disappear. Note You also can use the setup me
Resumo do conteúdo contido na página número 18
Eco Mode (Power Saving, Low Noise) The following three Eco Mode settings are available to specify whether priority should be given to low-power, low-noise operation or to projection brightness. On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and automatically adjusts projection brightness and color accordingly. Brightness is reduced for darker surroundings, which saves power and reduces operation noise. On (Manual): Enables manual adjustment to balance th
Resumo do conteúdo contido na página número 19
Note While “Off” is selected for the Eco Mode setting, you also can specify whether brightness or color should be given emphasis. For details, see “Eco Off Mode” under “Image Adjustment 1 Main Menu” (page 29). (for USB port model users) Use the setup menu (page 20) to select the Eco Mode when the input source is an external device connected to the USB port. Using the [FUNC] Key Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described b
Resumo do conteúdo contido na página número 20
Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Basic Setup Menu Operations Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Main menu Pressing the [MENU] key displays the main menu. The currently selected menu item is the one that is highlighted. Sub-menu The sub-menu shows each individual setting under each main menu item, and its current setting. G
