Resumo do conteúdo contido na página número 1
U R T G
LPX-510
Home Cinema Projector
ENGLISH
OWNER'S MANUAL
Resumo do conteúdo contido na página número 2
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. CAUTION 2 Keep these instructions. RISK OF ELECTRIC 3 Heed all warnings. SHOCK 4 Follow all instructions. DO NOT OPEN 5 Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF 6 Clean only with dry cloth. ELECTRIC SHOCK, DO NOT REMOVE 7 Do not block any ventilation openings. Install in COVER (OR BACK). NO USER-SERVICEABLE accordance with the manufacturer’s instructions. PARTS INSIDE. REFER SERVICING TO 8 Do not install
Resumo do conteúdo contido na página número 3
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Electronics Corporation Address: 6660 Orangethorpe Avenue Buena Park, CA90620 Telephone: 714-522-9105 Fax: 714-670-0108 Type of Equipment: Projector Model Name: LPX-510 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference t
Resumo do conteúdo contido na página número 4
Caution: Read this before operating this unit. • • To assure the finest performance, please read this • • When not planning to use this unit for a long period of • • • • manual carefully. Keep it in a safe place for future time (i.e. vacation), disconnect the AC power plug from reference. the wall outlet. • • • • When disconnecting the power cord from the wall outlet, Installation grasp the plug; do not pull the cord. • • • • Install this unit in a well-ventilated, cool, dry, clean • • • • B
Resumo do conteúdo contido na página número 5
OBSERVERA Alleen voor klanten in Apparaten kopplas inte bort från växelströmskällan Nederland (nätet) så länge som den är ansluten till vägguttaget, Bij dit product zijn batterijen geleverd. även om själva apparaten har stängts av. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. ADVARSEL Netspæendingen til dette apparat er IKKE afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t endt – også selvom der or slukket på apparatets afbryder. VAROITUS Laitteen
Resumo do conteúdo contido na página número 6
Contents Notes on Handling and Storage ........................................................................2 Accessories .......................................................................................................3 Features of the Projector ...................................................................................4 Basic Operations Turning On the Projector....................................................................................6 Connecting the Power Cord ......
Resumo do conteúdo contido na página número 7
Notes on Handling and Storage Be sure to observe the following precautions to avoid malfunctions, operating errors or damage to the projector. Notes on Handling and Storage • Do not set up the projector near high-voltage electrical wires or sources of magnetic fields. These may interfere with correct operation. • Do not touch the lens with bare hands. If fingerprints or grease get onto the lens, it can interfere with the quality of the projected images. Attach the lens cover to the lens when th
Resumo do conteúdo contido na página número 8
r o t c e j o r P a m Accessories Check the included accessories Remote control Setup guide ZOOM FOCUS LPX-510 IRIS SETTING PATT ESCAPE MENU Before Using the Inserting the batteries and replacement period 1 Remote Control Using the remote control and remote operating range Screen Size and Setting-up Distance Setup 2 Setting-up Methods Connecting to a home theater system 3 ASPECT INPUT Connecting to a Computer 4 LIGHT HIDE S VIDEO A HDMI VIDEO BD4 INPUT MEMORY 123 456 Battery (AA) x 2 Power cord
Resumo do conteúdo contido na página número 9
Features of the Projector Image appearance can be selected to match the projection environment (Picture Mode) The projector is equipped with a unique CB (color balance) filter that enhances the color reproduction of images. It is ideal for use in providing the optimum image effects for the projection environment when viewing images such as games, sporting competitions and movies. It makes other troublesome color adjustments unnecessary. (p.18) Equipped with a wide- angle lens shift function
Resumo do conteúdo contido na página número 10
Basic Operations This chapter describes basic operations such as turning the projector on and off and adjusting the projected images. Turning On the Projector .................................................................. 6 • • • • Connecting the Power Cord ........................................................................................6 • • • • Turning On the Power and Projecting Images ..........................................................7 Turning Off the Projector...........
Resumo do conteúdo contido na página número 11
Turning On the Projector This section describes the procedure from turning on the power to projecting images. Be sure to read the Safety Instructions in this manual for details on safe handling when using the projector. Connecting the Power Cord Check that the power is turned off for all 1 components connected to the projector. Connect the computer or other video 2 source to the projector. Refer to the Setup Guide. Remove the lens cap. 3 Connect the accessory power cord to 4 the projector.
Resumo do conteúdo contido na página número 12
Turning On the Projector Turning On the Power and Projecting Images Turn on the power for all equipment 1 connected to the projector. For a video source, press the [Play] button at the video source to start playback. Press the [STANDBY/ON] button on the Lights green 2 projector's control panel or the STANDBY/ON button on the remote control to turn on ESCAPE MENU the power. ZOOM FOCUS IRIS SETTING PATT The indicator flashes green, and after a PATTERN SETTING short period projection starts
Resumo do conteúdo contido na página número 13
Turning On the Projector • • • • If only one signal source has been connected, the signals from that source will be projected without needing to press one of the above buttons. • • • • If video signals are being input to several input ports simultaneously, interference between the various signals may occur, and this may cause interference in the projected images. If this happens, turn off the power supply or disconnect the video equipment which is not currently being used. • • • • If the "No
Resumo do conteúdo contido na página número 14
Turning Off the Projector Follow the procedure below to turn off the power of the projector. Turn off the power for the signal 1 sources that are connected to the projector. Check that the power for all connected components has been tuned off. Press the [STANDBY/ON] button on the Power OFF? 2 projector's control panel or the button on the remote control. Yes : Press b STANDBY/ON utton No Press any other button : The confirmation message shown at left will appear.
Resumo do conteúdo contido na página número 15
Turning Off the Projector Retract the front adjustable foot if it is 5 extended. Turn the front adjustable foot to retract it. Retract Retract Attach the lens cap. 6 Attach the lens cap to the lens when not using the projector, in order to stop the lens from getting dusty or dirty. Disconnect the cords that are 7 connecting the projector and other equipment. 10
Resumo do conteúdo contido na página número 16
Adjusting the Screen Image You can adjust the screen image in order to obtain the best possible picture. Adjusting the Image Size (Zoom adjustment) The size of the projected image is basically determined by the distance from the projector to the screen. (Refer to the Setup Guide.) The following procedures explain how to adjust the screen image once the projector itself has been set up. STANDBY/ON Press the [SETTING] button on the 1 ZOOM projector's control panel or the ESCAPE MENU button on
Resumo do conteúdo contido na página número 17
Adjusting the Screen Image Projection image position adjustment (Lens shift) The lens shift function can be used to adjust the position of projected images when the projector has been set up in places such as the following. • • • • When the projector is suspended from a ceiling • • • • When the screen is higher than the projector • • • • When the projector is at an angle to the screen so that people can sit directly in front to view the screen • • • • When the projector is on top of a desk or s
Resumo do conteúdo contido na página número 18
Adjusting the Screen Image Correcting Keystone Distortion (Keystone) When you wish to adjust the projection above or below the range of lens shift adjustment set the projector at an angle. When the projector is angled, the projected image may distort into a trapezoid. Keystone distortion can be corrected within a maximum vertical angle of approximately 15°. Approx. 15° ° ° ° above Approx. 15° ° below ° ° 15° 15° Adjustment procedure Press the or button on the projector's control panel to ad
Resumo do conteúdo contido na página número 19
Adjusting the Screen Image Displaying a Test Pattern You can project a test pattern at times such as when setting up the projector in order to correct keystone correction and to make line menu adjustments. • • • • Crosshatch This can be used to check whether the projector is tilted or set up vertically in front of the screen. • • • • Grayscale pattern This is used when adjusting brightness or when adjusting image quality or color tone. The adjustment is made using the line menu. Adjustments
Resumo do conteúdo contido na página número 20
Adjusting the Screen Image STANDBY/ON IRIS SETTING PATT Exit the pattern display. 4 ESCAPE MENU Display the pattern select menu and then select ESCAPE MENU "Exit". Press the button on the projector's control PATTERN SETTING panel or the button on the remote control. ASPECT INPUT ASPECT INPUT LIGHT HIDE Remote control Projector The full menu cannot be displayed while a test pattern is being projected. If setting is required, press the button on the projector's control panel or the button o
