Resumo do conteúdo contido na página número 1
PJD5133/PJD5233/PJD5523w
DLP Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente
las instru
Resumo do conteúdo contido na página número 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro
Resumo do conteúdo contido na página número 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 7. the manufacturer’s instructions. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the replacement of the obsolete outlet. unit. Be sure that the power outlet is located near the unit so that it is easily accessible. by the manufacturer, or sold with the unit. When a cart is us
Resumo do conteúdo contido na página número 4
Declaration of RoHS Compliance Technical Adaptation Committee (TAC) as shown below: Proposed Substance Maximum Actual Concentration Concentration Cadmium (Cd) ) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers or more lead). weight. 1
Resumo do conteúdo contido na página número 5
Copyright Information © ® Copyright Corporation. omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. change without notice. Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ® For
Resumo do conteúdo contido na página número 6
Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recomme
Resumo do conteúdo contido na página número 7
CONTENTS Introduction ........................................................................5 Projector Features .......................................................................................................5 Package Contents .......................................................................................................6 Projector Overview ......................................................................................................7 Using the Product .................
Resumo do conteúdo contido na página número 8
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: SVGA (800 x 600 pixels) XGA (1024 x 768 pixels) WXGA (1280 x 800 pixels) Compatibility with Macintosh® computers Compatibility with NTSC, PAL, SECAM and HDTV D-Sub 15-pin terminal for analog video connectivity User-friendly, multi-language on-screen display Advanced electr
Resumo do conteúdo contido na página número 9
Package Contents When you unpack the projector, make sure you have all these components: Projector AC Power Cord Remote Control (IR) & batteries (AAA *2 PCS) VGA Cable (D-SUB to D- ViewSonic CD Wizard Quick Start Guide SUB) Contact you dealer immediately if any items are missing, appear damaged, or if the unit does not work. Save the original shipping carton and Packing material; they will come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was origin
Resumo do conteúdo contido na página número 10
Projector Overview Front View 9 8 7 6 1 2 3 4 5 Front IR remote control sensor Control panel 1 6 Elevator foot Zoom ring 2 7 Projection lens Focus ring 3 8 Speaker Lamp cover 4 9 Ventilation holes 5 7
Resumo do conteúdo contido na página número 11
Rear View 2 1 3 Connection ports 1 AC power socket 2 Kensington lock 2 3 Bottom View 3 1 3 2 Security bar 1 Ceiling mount holes 2 2 Ventilation holes 3 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. 8
Resumo do conteúdo contido na página número 12
E D O M Using the Product Control Panel 1 2 3 4 6 5 7 POWER MENU/ 8 EXIT TEMP/LAMP 4 Power 1 Turn the projector on or off. SOURCE 2 Display the source selection bar. MENU/EXIT 3 Display or exit the on-screen display menus. Keystone/Arrow keys ( /Up, /Down) 4 Manually correct distorted images resulting from an angled projection. Four directional buttons 5 Use four directional buttons to select items or make adjustments to your selection. MODE 6 Change the color mode setting by sequence. POWER (
Resumo do conteúdo contido na página número 13
Connection Ports 1 2 3 4 5 6 10 9 8 7 AUDIO IN 1 Connect an audio output from video equipment or computer to this jack. HDMI 2 Connect HDMI output from video equipment to this jack. S-VIDEO 3 Connect S-Video output from video equipment to this jack. COMPUTER IN 1 4 Connect image input signal (analog RGB or component) to this jack. RS-232 5 When operating the projector via a computer, connect this to the controlling computer's RS-232C port. MINI USB 6 This connector is for firmware update and mo
Resumo do conteúdo contido na página número 14
Remote Control Power 1 Turn the projector on or off. 13 VGA1 2 14 Display COMPUTER IN 1 signal. 15 Menu/ Left mouse 3 Display on-screen display menus. 16 3 Perform the left button of the 17 mouse when mouse mode is 4 activated. 5 18 Mouse/ Right mouse 4 6 Switch between the normal and 19 mouse modes. 5 Perform the right button of the mouse when mouse mode is 7 20 activated. 8 Keystone/Arrow keys ( /Up, 5 21 9 /Down) 10 Manually correct distorted images 22 resulting from an angled 11 23 p
Resumo do conteúdo contido na página número 15
15 Video/Page Up Using the remote mouse control Switch input source to Composite/ The capability of operating your computer S-Video/HDMI by sequence. with the remote control gives you more Perform page up function when flexibility when delivering presentations. mouse mode is activated. 1. Connect the projector to your PC or 16 VGA2 Display COMPUTER IN 2 signal. notebook with a USB cable prior to using the remote control in place of 17 ESC/Page Down your computer’s mouse. See Goes back to
Resumo do conteúdo contido na página número 16
Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Make sure the plus and minus terminals are correctly aligned when loading a battery. Keep the batteries out of the reach of children. There is a danger of death by accidental
Resumo do conteúdo contido na página número 17
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the remote sensor is visible. Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not g
Resumo do conteúdo contido na página número 18
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. 6 7 6 1 8 3 4 2 1 1 5 Audio cable VGA (D-Sub) to HDTV (RCA) cable 1 5 HDMI cable VGA cable (D-Sub to D-Sub) 2 6 Composite Video cable USB cable 7 3 S-Video cable VGA to DVI-A cable 8 4 Important In the connections shown above, some cables may not be included with the projecto
Resumo do conteúdo contido na página número 19
Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both ® ® IBM compatibles and Macintosh computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of the VGA cable to the COMPUTER IN 1 or COMPUTER
Resumo do conteúdo contido na página número 20
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: HDMI Component Video S-Video Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video
