Resumo do conteúdo contido na página número 1
Multimedia Projector
MODEL PLV-Z2000
Owner’s Manual
http://www.pureglare.com.au
Resumo do conteúdo contido na página número 2
Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It uses built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. Short Throw & Wide-Range Zoom Lens Automatic Slide Shutter The 2x Short Throw & Wide-Range Zoom Lens is capable of The automatic slide shutter protects the lens from dust and throwing a 100” diagonal image from a distance of 9.8’ (3.
Resumo do conteúdo contido na página número 3
Table of Contents Features and Design................ 2 Input............................ 24 Input Source and System Selection 24 Table of Contents .................. 3 Image........................... 27 To the Owner ..................... 4 Image Mode Selection 27 Safety Instructions ................. 5 Image Adjustment ................ 28 Air Circulation 6 Image Mode Adjustment 28 Installing the Projector in Proper Position 6 Moving the Projector 6 Picture Adjustment................ 34 Picture
Resumo do conteúdo contido na página número 4
To the Owner Before operating this projector, read this manual thoroughly Safety Precaution and operate the projector properly. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC This projector provides many convenient features and SHOCK, DO NOT EXPOSE THIS APPLIANCE TO functions. Operating the projector properly enables you to RAIN OR MOISTURE. manage those features and maintain it in good condition for –This projector produces intense light from the projection many years to come. lens. Av
Resumo do conteúdo contido na página número 5
Safety Instructions All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for local power company. later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Resumo do conteúdo contido na página número 6
Safety Instructions Air Circulation Installing the Projector in Proper Position Openings in the cabinet are provided for ventilation. To Install the projector properly. Improper installation may reduce ensure reliable operation of the product and to protect it from the lamp life and cause fire hazard. overheating, these openings must not be blocked or covered. 20˚ Do not tilt the projector more than 20 degrees from side to side. CAUTION 20˚ Hot air is exhausted from the exhaust vent. When usi
Resumo do conteúdo contido na página número 7
Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communi
Resumo do conteúdo contido na página número 8
Part Names and Functions Exhaust Vent Front Air flow CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. Top Controls and Indicators Automatic Slide Shutter Projection Lens Focus Ring Zoom Lever Infrared Remote Receiver Vertical Lens Shift Ring (Up/Down) Horizontal Lens Shift Ring (Left/Right) Lens Shift Lock Back Terminals and Connectors Main On/Off Switch Power Cord Connector Air Intake Vent Lamp Cover Kensingto
Resumo do conteúdo contido na página número 9
Part Names and Functions Rear Terminal COMPUTER SERVICE PORT Connect the computer output signal, or RGB Scart 21-pin This jack is used to service the projector. video output to this connector (p.16). HDMI 1/HDMI 2* Connect the HDMI output signal from video equipment S-VIDEO to these terminals (p.16). Connect the S-Video output signal from video equipment to this jack (p.15). VIDEO Connect the composite video output signal from video COMPONENT 1 or COMPONENT 2 equipment to this ja
Resumo do conteúdo contido na página número 10
Part Names and Functions Top Control INPUT button POWER indicator – Lights red while the projector is in stand-by mode. Select an input source (p.24). –Lights green during operations. –Blinks red during the cooling-off period. POINT buttons –Blinks green in the Power management mode (p.41). Select an item or adjust the setting values in the On- –Blinks orange when the automatic slide shutter is Screen Menu. closed during operations (p.53). OK button WARNING indicator Execute the
Resumo do conteúdo contido na página número 11
Part Names and Functions POWER ON/STAND-BY button Remote Control Turn the projector on or off (pp.18, 19). RESET button Reset to the previous figure. This function is limited to when selecting the Image Adjustment (pp.28 – 33) and Picture Adjustment (p.34). LIGHT button Light up the remote control buttons for about 10 seconds (p.22). MENU button Open or close the On-Screen Menu (p.20). POINT buttons Select an item or adjust the setting values in the On-Screen Menu. SCREEN butto
Resumo do conteúdo contido na página número 12
Part Names and Functions Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector. 16.4’ (5 m) 30° 30° Remote control Remote Control Battery Installation Open the battery Install new batteries Replace the compartment lid. 12 3 compartment lid. into the compartment. Pull up the lid Two AA size batteries For correct
Resumo do conteúdo contido na página número 13
Installation Positioning the Projector This projector is designed to project on a flat projection surface having a focus range of 3.9’ (1.2 m) to 30.2’ (9.2 m) at maximum zoom and 7.9’ (2.4 m) to 60.4’ (18.4 m) at minimum zoom. Refer to the figure and table below for the screen size and distance between the projector and screen. 30.2’ (9.2 m) (Inch Diagonal) 300” Max. Zoom 15.1’ (4.6 m) 9.8’ (3.0 m) 7.9’ (2.4 m) 150” 150” Min. Zoom 3.9’ (1.2 m) 100” 80” 75” 50” 40” 40” (Center) Screen Size 40”
Resumo do conteúdo contido na página número 14
Installation Moving the Lens The projection lens can be moved up and down or left and right manually with the Lens Shift Rings, enabling you to adjust the position of a projected image. After adjusting the position, lock the lens with the Lens Shift Lock. Horizontal Lens Shift Ring Lens Shift Lock Move the projection lens to the left or right with the Horizontal (Left/Right) Lens Shift Ring. Move the projection lens up or down with the Vertical Lens Shift Ring. Vertical Lens Shift Ring (Up/D
Resumo do conteúdo contido na página número 15
Installation This projector can be connected up to six equipment at one time. See the figures below for the connections. Connecting to Video Equipment (Video, S-Video) Video, S-video Video Equipment Use a video cable or a S-video cable (commercially available). Composite S-VIDEO Video Output Output Video Cable S-video (RCA x 1) Cable VIDEO S-VIDEO Connecting to Video Equipment (Component) Component Video Equipment Use a component cable (optional). Component Video Output (Y, Pb/Cb, Pr/Cr) Compone
Resumo do conteúdo contido na página número 16
Installation Connecting to Video Equipment (HDMI, RGB Scart) HDMI RGB Scart Use a HDMI cable (optional) for HDMI output. Use a Scart-VGA cable (optional). Video Equipment Video Equipment HDMI Video RGB Scart Output 21-pin Output HDMI Scart-VGA Cable Cable COMPUTER HDMI Connecting to a Computer Computer (Analog) Computer Use a VGA cable (commercially available) or a DVI-VGA cable (commercially available). Monitor Out DVI-VGA VGA Cable Cable COMPUTER Note: To order the optional cables, see p
Resumo do conteúdo contido na página número 17
Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100 – 120 V or 200 – 240 V AC and it automatically selects a correct input voltage. It is designed to work with the single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all
Resumo do conteúdo contido na página número 18
Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, POWER POWER indicator 1 etc.) before turning on the projector. ON/STAND-BY button Connect the projector’s AC power cord into an AC outlet and 2 turn the Main On/Off switch on. The POWER indicator lights red. Press the POWER ON/STAND-BY button on the top control or 3 on the remote control. The POWER indicator turns green and the cooling fans start to operate. As the automatic slide shutter open
Resumo do conteúdo contido na página número 19
Basic Operation Turning Off the Projector Press the POWER ON/STAND-BY button on the top control 1 or on the remote control. “Power off?” appears on the screen. Press the POWER ON/STAND-BY button again to turn off the projector. When the Power off confirmation function is set to “Off,” the projector can be turned off without the confirmation message. (See “Power off confirmation” on page 40.) “Power off?” disappears after 4 seconds. The automatic slide shutter closes and the POWER indicator
Resumo do conteúdo contido na página número 20
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. Top Control The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. POINT buttons (arrowhead) Press the MENU button on the top control or on the remote 1 control to display the On-Screen Menu. OK button Use the Poin
