Resumo do conteúdo contido na página número 1
Multimedia Projector
MODEL PLC-SU25
Owner’s Manual
Resumo do conteúdo contido na página número 2
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual
Resumo do conteúdo contido na página número 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Resumo do conteúdo contido na página número 4
COMPLIANCES Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
Resumo do conteúdo contido na página número 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER INPUT (RGB Scart 21-Pin Video Input) 22 SELECTING INPUT SOURCE 22 SELECTING COMPUTER SYSTEM 23 PREPARATION 7 COMPATIBLE COMPUTER SPECIFICATIONS 24 PC ADJUSTMENT 25 AUTO PC ADJUSTMENT 25 NAME OF EACH PART OF PROJECTOR 7 MANUAL PC ADJUSTMENT 26 SETTING-UP PROJECTOR 8 PICTURE IMAGE ADJUSTMENTS 28 CONNECTING AC POWER CORD 8 IMAGE LEVEL SELECT 28 POSITIONING PROJECTOR 9 IMAGE LEVEL ADJUSTMENT 29 ADJUSTABLE FEET 9 INSTALLING PROJECTOR IN PROPER POSITION
Resumo do conteúdo contido na página número 6
FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design Digital Zoom (for Computer) This projector is extremely compact in size and weight. Digital Zoom function expands (to approx. 16 times of It is designed to be carried and work anywhere you wish screen
Resumo do conteúdo contido na página número 7
Resumo do conteúdo contido na página número 8
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projec
Resumo do conteúdo contido na página número 9
PREPARATION POSITIONING PROJECTOR This projector is designed to project on a flat projection surface. ROOM LIGHT The projector can be focused from 3.6’(1.1m) ~ 22.6’(6.9m). Refer to the figure below to adjust a screen size. The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. H1 : H2 = 26 : 1 22.6' (6.9m) 260” 17.4' (5.3m) 13.1' (4.0m) 200” Max. Zoom 216” 8.5' (2.6m) Min. Zoom 150” H1 166” 3.6
Resumo do conteúdo contido na página número 10
PREPARATION INSTALLING PROJECTOR IN PROPER POSITION Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard. 20˚ Do not tilt the projector more than 20 degrees above and below. 20˚ Do not point the projector up to project an image. NO UPWARD Do not point the projector down to project an image. NO DOWNWARD Do not put the projector on either side to project an image. NO SIDEWAYS MOVING PROJECTOR Use Carry Handle when moving the projector
Resumo do conteúdo contido na página número 11
Resumo do conteúdo contido na página número 12
Resumo do conteúdo contido na página número 13
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • Scart-VGA Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ Video Source (example) Component video output equipment. (such as DVD player or high-definition TV source.) Video Cassette Recorder Video Disc Player RGB Scart Composite Component Video Output Audio Output S-VIDEO Output 21-pin Output Video Output (Y, Pb/Cb, Pr/Cr) (R, L)
Resumo do conteúdo contido na página número 14
Resumo do conteúdo contido na página número 15
Resumo do conteúdo contido na página número 16
P M A L Y D A E R BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. POWER ON–OFF BUTTON Used to turn the projector on or off. (P19) WARNING TEMP. INDICATOR READY INDICATOR Flashes red when the internal projector Lights green when the temperature is too ON -- OFF projector is ready to be high. (P41) turned on. And it flashes green in Power Management mode. LAMP REPLACE INDICATOR (P37) Turns yellow when the life of the pro
Resumo do conteúdo contido na página número 17
LOCK Y D A E R BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON-SCREEN REMOTE CONTROL AUTO PC ON-OFF MENU. Refer to the following pages to operate each adjustment POINT BUTTON on the ON-SCREEN MENU. D.ZOOM FREEZE NO SHOW Used to move the Pointer UP/ DOWN/ RIGHT/ LEFT. 1 DISPLAY MENU MUTE IMAGE Press the MENU button to display the ON-SCREEN MENU. VOLUME- VOLUME+ SELECT ON -- OFF SELECT BUTTON Used to select an ite
Resumo do conteúdo contido na página número 18
BEFORE OPERATION MENU BAR FOR PC SOURCE Press the MENU BUTTON while connecting to PC input source. IMAGE SELECT MENU SCREEN MENU SETTING MENU Used to select an Used to adjust size Used to change GUIDE WINDOW PC SYSTEM MENU image level among of image. [Normal settings of the projector Shows the selected Used to select Standard, Real / True / Wide / or reset the Lamp item of the ON- computer system. and Image 1 ~ 4. Digital zoom +/–] Replace Counter. SCREEN MENU. (Refer to P22-24) (Refer to P28
Resumo do conteúdo contido na página número 19
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON PROJECTOR Complete peripheral connections (with Computer, VCR, etc.) 1 before turning on the projector. (Refer to "CONNECTING PROJECTOR" on page 11~13.) Connect the projector's AC Power Cord into an AC outlet. The 26 2 LAMP Indicator lights red, and the READY Indicator lights green. NOTE : When “On start” function is ON, this projector is turned on automatically by connecting AC Power Cord to an AC outlet. (Refer to the menu item "On star
Resumo do conteúdo contido na página número 20
BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT Press the ZOOM button on the Top Control or the ZOOM / 1 button on the Remote Control. The message “Zoom” is displayed. Zoom Press the ZOOM button or the POINT UP button to make 2 image larger, and press the ZOOM button or the POINT DOWN button to make image smaller. The message disappears after 4 seconds. FOCUS ADJUSTMENT Press the FOCUS button on the Top Control or the FOCUS / 1 button on the Remote Control. The message “Focus” is disp
