Resumo do conteúdo contido na página número 1
Table of Contents
Table of Contents
Table of Contents ................................................................................................................. 1
Usage Notice......................................................................................................................... 3
Introduction .......................................................................................................................... 6
Packing Checklist ...............................
Resumo do conteúdo contido na página número 2
Table of Contents Image Problems ....................................................................................................................................................... 48 Lamp Problems........................................................................................................................................................ 48 Remote Control Problems...................................................................................................................
Resumo do conteúdo contido na página número 3
Usage Notice Usage Notice Congratulations and thank you for choosing an Optoma DLP projector. Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Precautions Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The following styles are used in this manu
Resumo do conteúdo contido na página número 4
Usage Notice Environmental Considerations A. Temperatures: Operating: 5 ~ 40 °C Non-operation: -10°C ~ 60°C B. Humidity: Operating: 5% to 85% Non-Operation: 5% to 95% Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardous if do
Resumo do conteúdo contido na página número 5
Usage Notice Main Features • Lightweight unit, easy to pack away and transport • Compatible with all major video standards including NTSC, PAL, and SECAM • A high brightness rating allows for presentations in daylight or in lit rooms • Supports resolutions up to UXGA (for XGA model)/WXGA+ (for WXGA model) at 16.7 mil- lion colors to deliver crisp, clear images • Flexible setup allows for front and rear projections • Line-of-vision projections remain square, with advanced keystone corre
Resumo do conteúdo contido na página número 6
Introduction Introduction Packing Checklist Carefully unpack the projector and check that the following items are included: DLP PROJECTOR REMOTE CONTROL (WITH TWO AAA BATTERIES) USB CABLE VIDEO CABLE POWER CORD (USB TYPE A TO B USB) (RCA X 1 TO RCA X 1) COMPUTER CABLE CARRYING CASE (VGA TO VGA) Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. Caution: Avoid using the projector in dusty environments.
Resumo do conteúdo contido na página número 7
Introduction Views of Projector Front-right View ITEM LABEL DESCRIPTION SEE PAGE: Ventilation opening To keep the projector lamp cool 1. Height-adjuster button Push to release height adjustor 20 2. Height-adjuster Adjusts level of projector 3. Lens cap Attach to protect lens when not in use 4. IR receiver Receiver for IR signal from remote control 5. 11 Lens Adjust focus/zoom on top opening 6. Focus Focuses the projected image 7. 21 Zoom Enlarges the projected imag
Resumo do conteúdo contido na página número 8
Introduction Top view—On-screen Display (OSD) buttons and LEDs ITEM LABEL DESCRIPTION SEE PAGE: Power Turns the projector On or Off 16 1. ◄/Source Select the input device 2. (Left arrow) Navigates and changes settings in the OSD Power LED Green Unit is powered on and working correctly 3. Flashing Unit is on stand-by/cooling down Green Off Unit is powered off Lamp LED On Lamp not ready—do not press the power button 4. Off Lamp is in normal state Temp LED On System over
Resumo do conteúdo contido na página número 9
Introduction Rear view ITEM LABEL DESCRIPTION SEE PAGE: AC IN (Power) Connect the supplied power cord 1. 16 (USB) Connect the USB cable from a computer 2. AUDIO Connect the audio cable from an audio input device. 3. S-VIDEO Connect the composite or S-video cable from a video device 4. VIDEO Connect a composite video cable from a video device. 5. VGA/SCART Connect a VGA cable from a computer 6. Ventilation Do not obstruct to keep the projector cool. 7. opening DIGI
Resumo do conteúdo contido na página número 10
Introduction Bottom view ITEM LABEL DESCRIPTION SEE PAGE: Projection lamp cover Remove when changing the lamp 1. 41 screws Height adjuster button Push to release height adjuster 2. 20 Height adjuster Adjuster drops down when adjuster button is 3. pushed Strap mount Fasten the lens cap cover 4. Tilt adjuster Rotate adjuster lever to adjust angle position 5. 20 10
Resumo do conteúdo contido na página número 11
Introduction Remote Control Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path be- tween the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces such as projector screens. 3. The buttons and keys on the projector have the
Resumo do conteúdo contido na página número 12
Introduction Right Right arrow when connected through USB to a PC 5. Down Down arrow when connected through USB to a PC 6. R (Right) R key for emulation of USB mouse right click via USB 7. ▲/Page+ Page Up key when connected through USB to a PC 8. (Up arrow) Navigates and changes settings in the OSD ►/Re-SYNC Navigates and changes settings in the OSD 9. (Right arrow) Re-Sync VGA source, adjustment for phase, tracking, size, position when OSD off ▼/Page- Page Down key when con
Resumo do conteúdo contido na página número 13
Introduction Note: The remote control can only interface with a computer when connected to the computer through a USB cable connection. The computer cable connects a computer to the projector for display pur- poses only. Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the
Resumo do conteúdo contido na página número 14
Introduction Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direc- tion of the arrow. 2. Insert the supplied batteries taking note of the polarity (+/-) as shown here. 3. Replace the cover. Caution: 1. Only use AAA batteries (Alkaline battery is preferred). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the projector for prolonged periods. 1
Resumo do conteúdo contido na página número 15
Setup and Operation Setup and Operation Connecting Input Devices A PC or notebook computer as well as video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector. ITEM LABEL DESCRIPTION USB Connect the USB cable from a computer for USB mouse function and firmware upgrades.
Resumo do conteúdo contido na página número 16
Setup and Operation Starting and Shutting down the Projector 1. Connect the power cord to the projector. 2. Turn On the connected devices. 3. Ensure the Power LED is steady (flashing) and then press the Power button to turn On the projector. The projector splash screen displays and connected devices are detected. If the connected device is a PC, press the appropriate keys on the computer keyboard to switch the display output to the projector. (Check the user manual of the PC
Resumo do conteúdo contido na página número 17
Setup and Operation Setting an Access Password (Security Lock) You can use the arrow buttons to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector. (See Navigating the OSD on page 22 and Setting the OSD Language on page 23 for help on using OSD menus.) Important: Keep the password in a safe place. Without the password, you will not be able to use the projector. If you lose the password, contact your r
Resumo do conteúdo contido na página número 18
Setup and Operation 3. Press ▲▼ to select Security. 4. Press ▲▼ to select Security Setting and then press ◄► to select En- able/Disable. 5. When the security setting is Enabled, you are prompted to enter a password soon after the projector is powered on. Note: If the incorrect password is en- tered three times the projector auto shutdowns down after 10 seconds. The default password is: <1> <2> <3> <4> <5>. 18
Resumo do conteúdo contido na página número 19
Setup and Operation 6. To change a password, enter the previ- ous password when prompted. 7. Use the following keys <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9> to define a new password. 19
Resumo do conteúdo contido na página número 20
Setup and Operation Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or stand should be level and sturdy. • Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. You could trip over them. 1. To raise the level of the projector, lift the projector [A] and press the height- adjuster button [B]. The height adjuster drops down [C]. 2. To lower the level of the projecto
