Resumo do conteúdo contido na página número 1
Projector
CP-X705/CP-X615
User's Manual – Operating Guide
Technical
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode
720 x 400 37.9 85.0 VESA TEXT
640 x 480 3.5 59.9 VESA VGA (60Hz)
640 x 480 37.9 72.8 VESA VGA (72Hz)
640 x 480 37.5 75.0 VESA VGA (75Hz)
640 x 480 43.3 85.0 VESA VGA (85Hz)
800 x 600 35.2 56.3 VESA SVGA (56Hz)
800 x 600 37.9 60.3 VESA SVGA (60Hz)
800 x 600 48. 72.2 VESA SVGA (72Hz)
800 x 600 46.9 75.0 VESA SVGA (75Hz)
800 x 60
Resumo do conteúdo contido na página número 2
Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Display interval (C) Display interval (c) Data Data H. Sync. V. Sync. Sync (A) Sync (a) Horizontal signal timing (μs) Vertical signal timing (lines) Computer/ Computer/ Signa
Resumo do conteúdo contido na página número 3
Connection to the ports Connection to the ports B A C D LAN RGB1 HDMI Y CB/PB RGB VIDEO CR/PR OUT AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR H V R L R L AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 USB CONTROL A B RGB 1, RGB OUT D-sub 5pin mini shrink jack 2 3 4 5 • Video signal: RGB separate, Analog, 0.7Vp-p, 6 7 8 9 0 2 3 4 5 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL l
Resumo do conteúdo contido na página número 4
Connection to the ports (continued) LAN I E F G RGB1 HDMI Y CB/PB RGB VIDEO OUT CR/PR AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR H H V R L R L AUDIO OUT REMOTE AUDO IN 3 AUDIO IN 4 CONTROL USB CONTROL E F COMPONENT VIDEO Y, CB/PB, G CR/PR RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p), 25i( 080i) Port Signal Y Component video Y, 1.0±0.1Vp-p, 75Ω terminator with composite sync B CB/P Component video CB/PB, 0.7±0.1Vp-p, 75Ω te
Resumo do conteúdo contido na página número 5
Connection to the ports (continued) LAN J RGB1 HDMI L YM N CB/PB O P Q R RGB VIDEO CR/PR OUT K AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR H V R L R L AUDIO OUT REMOTE AUDO IN 3 AUDIO IN 4 CONTROL USB CONTROL J K AUDIO IN 1, AUDIO IN 2 Ø3.5 stereo mini jack • 500 mVrms 47kΩ terminator AUDIO IN 3 L R, M L, AUDIO IN 4 N R, O L RCA jack x2 • 500 mVrms 47kΩ terminator P AUDIO OUT Ø3.5 stereo mini jack • 500 mVrms 1kΩ output impedance Q REMOTE CONTROL Ø
Resumo do conteúdo contido na página número 6
Connection to the ports (continued) T LAN RGB1 HDMI S Y CB/PB RGB VIDEO OUT CR/PR AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR H V R L R L AUDIO OUT REMOTE AUDO IN 3 AUDIO IN 4 CONTROL USB CONTROL S USB USB B type jack Pin Signal +5V 2 - Data 3 + Data 4 Ground T LAN 2 3 4 5 6 7 8 RJ-45 jack Pin Signal Pin Signal Pin Signal TX+ 4 - 7 - 2 TX- 5 - 8 - 3 RX+ 6 RX- 6
Resumo do conteúdo contido na página número 7
RS-232C Communication RS-232C Communication 2 3 4 5 2 3 4 5 6 8 6 8 7 9 7 9 CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - () () CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) (8) DTS - (9) (9) RI Connecting the cable Turn off the projector and the computer. . Connect the CONTROL port of the projector with a RS-232C port of 2. the computer by a RS-232C cable (cross). U
Resumo do conteúdo contido na página número 8
RS-232C Communication (continued) Requesting projector status (Get command) ( ) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector. (2) The projector returns the response code ‘ DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) () Send the setting code Header + Command data (‘0H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector. (2) The projector chang
Resumo do conteúdo contido na página número 9
Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #975 Command Control Settings Configure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23. Default setting is “Enable”. Netowrk Control Click the [Enable] check box for the Port1 (Port: 23) [Authentication] se
Resumo do conteúdo contido na página número 10
Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC flag for command data CRC_high: Upper byte of CRC flag for command data 3. Command data Command data chart byte_0 byte_ byte_2 byte_3 byte_4 byte_5 Action Type Setting code low high low high low high Action (byte_0 - ) Action Classification Content Set Change setting to desired va
Resumo do conteúdo contido na página número 11
Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) () The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type(2 bytes) + ‘00H’ +‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the PC. When the projector cannot understand the received command When the projector cannot understand the received command,
Resumo do conteúdo contido na página número 12
Command Control via the Network (continued) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ +‘xxH’ NAK reply: ‘15H’ + ‘xxH’ Error reply: ‘1CH’ + ‘xxxxH’ + ‘xxH’ Data reply: ‘1DH’ + ‘xxxxH’ + ‘xxH’ Projector busy reply: ‘1FH’+ ‘xxxxH’ + ‘xxH’ Authentication error reply: ‘1FH’ + ‘0400H’ + ‘xxH’ (‘xxH’ : connection ID) Automatic Connection Break The TCP co
Resumo do conteúdo contido na página número 13
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type SettingCode Power Set TURN OFF BE EF 03 06 00 2AD3 01 00 0060 0000 TURNON BE EF 03 0600 BA D2 0100 0060 01 00 Get BEEF 03 06 00 19 D3 02 00 00 60 0000 [Examplereturn] 00 00 0100 02 00 [Off] [On] [Cooldown] Input Source Set RGB1 BE EF 03 0600 FE D2 0100 00 20 00 00 RGB2 BEEF 03 06 00 3E D0 01 00 00 20 04
Resumo do conteúdo contido na página número 14
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type SettingCode GAMMA Set #1 DEFAULT BE EF 03 06 00 07 E9 01 00 A1 30 20 00 #1CUST OM BE EF 03 0600 07 FD 01 00 A1 30 1000 #2 DEFAULT BE EF 03 06 00 97 E8 01 00 A1 30 21 00 #2 CUSTOM BE EF 03 06 00 97FC 0100 A130 1100 #3 DEFAULT BE EF 03 06 00 67 E8 01 00 A130 2200 #3CUST OM BE EF 03 06 00 67FC 0100 A1 30 12 00 #4 DEFAULT
Resumo do conteúdo contido na página número 15
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type Setting Code COLOR TEMP Set HIGH BE EF 03 06 00 0B F5 0100 B0 30 03 00 MID BE EF 03 0600 9B F4 01 00 B0 30 02 00 LOW BE EF 03 0600 6BF4 0100 B030 01 00 Hi-BRIGHT-1 BE EF 03 0600 3B F2 01 00 B0 30 0800 Hi-BRIGHT-2 BEEF 03 06 00 AB F3 0100 B0 30 0900 Hi-BRIGHT-3 BEEF 03 06 00 5BF3 0100 B0 30 0A 00 CUSTOM-1(HIGH) BEEF
Resumo do conteúdo contido na página número 16
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type SettingCode MYMEMOR Y Load Set 1 BE EF 03 06 00 0E D7 01 00 14 20 00 00 2 BE EF 03 0600 9E D6 01 00 14 20 0100 3 BE EF 03 0600 6ED6 01 00 1420 02 00 4 BE EF 03 06 00 FE D7 01 00 14 20 0300 MYMEMOR Y Save Set 1 BE EF 03 06 00 F2D6 01 00 15 20 00 00 2 BE EF 03 0600 62D7 01 00 15 20 01 00 3 BEEF 03 0600 92 D7 01
Resumo do conteúdo contido na página número 17
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type SettingCode COLORSP ACE Set AUTO BE EF 03 06 00 0E 72 01 00 0422 0000 RGB BE EF 03 0600 9E 73 01 00 0422 0100 SMPTE240 BEEF 03 06 00 6E 73 01 00 04 22 0200 REC709 BE EF 03 0600 FE 72 01 00 04 22 03 00 REC601 BEEF 03 0600 CE70 01 00 04 22 04 00 Get BEEF 03 06 00 3D72 0200 04 22 00 00 COMPONENT Set COMPONENT BE EF
Resumo do conteúdo contido na página número 18
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type Setting Code FRAMELOCK Set TURN OFF BE EF 03 06 00 3B2C 0100 50 30 00 00 RGB1 TURNON BEEF 03 06 00 AB C3 01 00 50 30 01 00 Get BE EF 03 06 00 08C2 0200 50 30 0000 FRAME LOCK Set TURN OFF BE EF 03 06 00 0B C3 01 00 5430 00 00 RGB2 TURNON BE EF 03 06 00 9B 2C 01 00 54 30 01 00 Get BEEF 03 0600 38C3 02 00 5430 00 00 FRA
Resumo do conteúdo contido na página número 19
RS-232C Communication / Network command table (continued) CommandData Names Operation Type Header CRC Action Type Setting Code VOLUME- Get BE EF 03 06 00 01 CC 0200 65 20 0000 COMPONENT Increment BE EF 03 0600 67 CC 0400 65 20 00 00 Decrement BE EF 03 06 00 B6 CD 05 00 65 20 00 00 TREBLE-RGB1 Get BE EF 03 0600 0DC8 02 00 70 20 00 00 Increment BE EF 03 06 00 6BC8 04 00 7020 0000 Decrement BEEF 03 06 00 BA C9 05 00 70 20 00 00 TREBLE-RGB2
Resumo do conteúdo contido na página número 20
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header CRC Action Type Setting Code SRS WOW– RGB1 Set TURNOFF BE EF 03 06 00 FE FF 01 00 90 20 00 00 MID BE EF 03 06 00 9E FE 01 00 90 20 02 00 HIGH BE EF 03 06 00 0E FF 01 00 90 20 0300 Get BE EF 03 06 00 CD FF 02 00 90 20 0000 SRS WOW – RGB2 Set TURN OFF BEEF 03 06 00 CE FE 0100 94 20 00 00 MID BEEF 03 06 00 AE FF 01 00 94 20 0200 HIGH BE EF 03
