Manual do usuário Epson PowerLite 420

Resumo do conteúdo contido na página número 1

®
PowerLite 420/425W/430/435W
Video Device
The default language of the menu system is English. To select another
4
Using the remote control
language, press the Menu button on the remote control. Select
Quick Setup
Connect up to 5 video devices and use the Source Search button on the
Extended and press . Select Language and press . Select your
projector or remote control to switch between them.
Make sure the batteries are installed as shown (two AA batteries).
Before using the projector, ma

Resumo do conteúdo contido na página número 2

® PowerLite 420/425W/430/435W Video Device The default language of the menu system is English. To select another 4 Using the remote control language, press the Menu button on the remote control. Select Quick Setup Connect up to 5 video devices and use the Source Search button on the Extended and press . Select Language and press . Select your projector or remote control to switch between them. Make sure the batteries are installed as shown (two AA batteries). Before using the projector, ma

Resumo do conteúdo contido na página número 3

Replace the wireless LAN module stopper and secure it using the screw Select the Connection Mode setting, press , and choose one of these Select the Projector Name setting, press , and enter a name (up to 4 12 5 Troubleshooting you removed. options: 16 characters long) to identify your projector over the network. If you see a blank screen or the No signal message after turning on your Quick to connect the projector to one computer on the network Use the displayed keyboard to enter c

Resumo do conteúdo contido na página número 4

Replace the wireless LAN module stopper and secure it using the screw Select the Connection Mode setting, press , and choose one of these Select the Projector Name setting, press , and enter a name (up to 4 12 5 Troubleshooting you removed. options: 16 characters long) to identify your projector over the network. If you see a blank screen or the No signal message after turning on your Quick to connect the projector to one computer on the network Use the displayed keyboard to enter c