Resumo do conteúdo contido na página número 1
MULTIMEDIA PROJECTOR
MODEL LC-SX1U
LC-SX1UL (Without Lens)
OWNER’S INSTRUCTION MANUAL
Resumo do conteúdo contido na página número 2
INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual, may cause harmful interference to radio co
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read that are covered by the operating instructions as before the product is operated. improper adjustment of other controls may result in Read all of the instructions given here and retain them for damage and will often require extensive work by a later use. Unplug this projector from AC power supply qualified technician to restore the projector to normal before cleaning. Do not use liquid or aerosol cleane
Resumo do conteúdo contido na página número 4
TABLE OF CONTENTS PAGE PAGE P-TIMER FUNCTION 34 FEATURES AND DESIGN 5 INTRODUCTION 5 AUTO IMAGE FUNCTION 34 CURSOR FUNCTION 34 COMPATIBILITY 5 MENU OPERATION 35-36 IMAGE RESOLUTION 5 MODE SELECT 35 AUTOMATIC MU LTISCANNING SYSTEM 5 SOUND ADJUSTMENT 36 SCREEN MODE 5 LANGUAGE ADJUSTMENT 36 MULTILANGUAGE 5 UNPACKING THE PROJECTOR 5 VIDEO MODE TRADEMARKS 5 COLOR SYSTEM SELECITION 37 INSTALLATION 6-9 VIDEO SOURCE SELECT 37 NAME OF EACH PART OF THE PRO
Resumo do conteúdo contido na página número 5
FEATURES AND DESIGN INTRODUCTION The multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built- in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional color quality. COMPATIBILITY The projector is compatible with many different types of personal comp
Resumo do conteúdo contido na página número 6
Resumo do conteúdo contido na página número 7
POSITIONING: • This projector is basically designed to project on a flat projection surface. • This projector can be focused from 4.9 (1.5 m) — 80.7 (24.6 m). • Refer to the figure below as an example when positioning the projector to the screen. THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE HAZARD. ADJUSTABLE FEET
Resumo do conteúdo contido na página número 8
VENTILATION This projector is equipped with a cooling fan to protect it from overheating. Pay attention to the following to ensure the ventilation and avoid a possible risk of fire and malfunction. • Do not cover the vents with papers or other materials. • Keep the rear grill at least 3.3 (1 m) away from any object. • Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking th
Resumo do conteúdo contido na página número 9
Your projector uses nominal input voltages of 100-120 VAC. The projector automatically selects the correct input voltage. The projector is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure what type of power is supplied to your building.
Resumo do conteúdo contido na página número 10
COMPUTER INPUT-1 TERMINAL (ANALOG HDB CONTROL PORT-1 CONNECTOR 1 8 15-PIN) Used to connect a mouse cable to the projector. Used to connect a computer to the projector. COMPUTER INPUT-1 TERMINAL (DIGITAL MDR CONTROL PORT-2 CONNECTOR 2 9 20-PIN) Used to connect a mouse cable to the projector Used to connect a computer to the projector. COMPUTER INPUT-2 JACKS (BNC TYPE x 5) USB PORT-i CONNECTOR 3 10 Used to connect a computer to the projector. Used to connect a computer to the proje
Resumo do conteúdo contido na página número 11
VIDEO INPUT JACKS-1 (BNC TYPE x 3) projector. Used to connect a video source to the 14 projector. VIDEO MONITOR OUTPUT JACKS (BNC 20 TYPE x 3) S-VIDEO INPUT JACK-1 Permits video connection to a monitor. 15 Used to connect a S-VHS video source to the projector. VIDEO MONITOR (S-VIDEO) OUTPUT 21JACK UDIO INPUT JACKS-1 (R and L) Permits S-VHS video connection to a 16Used to connect an audio source to the monitor. projector. AUDIO MONITOR OUTPUT JACKS (R VIDEO INPUT JACKS-2
Resumo do conteúdo contido na página número 12
CONNECTING TO THE COMPUTER INPUT I TERMINAL (ANALOG HDB 15-PIN) Personal computers can be connected to the HDB1 5-pin (VGA) terminal on the projector. • Connect the computer to these terminals using the VGA cable and VGA/MAC adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by any other cable. CONNECTING TO THE COMPU
Resumo do conteúdo contido na página número 13
CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB 15.PIN) This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2). When video source (“Video 1” or “Video 2) is selected, this terminal outputs Computer 1 input information. An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector. • Connect the monitor to this terminal using the VGA cable (not provided). Pin No./Signal Pin No/SignaI 1 Re
Resumo do conteúdo contido na página número 14
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Resumo do conteúdo contido na página número 15
CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER (DIGITAL INPUT CONNECTIONN) NOTE: Before using with digital connection, install (Plug in) Graphic Accelerator Board (included within projector) into PCI bus slot of the computer and set up the computer following instructions in the Graphic Accelerator Board package. NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipm
Resumo do conteúdo contido na página número 16
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Resumo do conteúdo contido na página número 17
CONNECTING AN IBM_COMPATIBLE LAPTOP COMPUTER (DIGITAL INPUT CONNECTION) NOTE: This connection need optionally saled Graphic Accelerator PC Card (GA-.SMO2P2ICB). For this information, contact to your authorized dealer. NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Resumo do conteúdo contido na página número 18
Set the dip switches as shown in the table below depending on the RESOLUTION MODE that you want to use before you turn on the projector and computer. NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Resumo do conteúdo contido na página número 19
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Resumo do conteúdo contido na página número 20
CONNECTING TO THE VIDEO INPUT JACKS (I and 2) BNC TYPE x 3 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other A’.~ equipment. Connect video output from AV equipment to these jacks using the BNC cables. The video input can be connected 3 types of signals; “COMPOSITE VIDEO”, Y/C SEPARATE VIDEO’ and COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}. Set VIDEO SOURCE of each video input (VIDEO IN-i or VIDEO IN-2) to input video matter. (R
