Resumo do conteúdo contido na página número 1
XES Synergix
8825/8830
Printer Operator Manual
701P19710 November 2000
Resumo do conteúdo contido na página número 2
EME Compliance in Canada FCC Compliance This digital apparatus does not exceed the Class A limits for radio noise emissions In the USA from digital apparatus set out in the radio interference regulations of the Canadian Class A Department of Communications. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
Resumo do conteúdo contido na página número 3
Trademark Acknowledgments XEROX®, XES™, Synergix™, The Document Company, and the identifying product names and numbers herein are trademarks of XEROX CORPORATION. ® ® ® ® Windows NT , Windows 95, Windows 98, and Windows 2000 are registered trademarks of Microsoft Corporation. Internet Explorer is a copyright protected program of Microsoft Corporation. ® Microsoft Word is a copyright protected program of Microsoft Corporation. PowerPoint is a trademark of Microsoft Corporation. Netscape is a regi
Resumo do conteúdo contido na página número 4
Introduction Congratulations on acquiring your new XES Synergix 8825/8830 Printer. We look Our support group is available to you for further assistance. The following forward to supporting you and helping you to increase your printing productivity. The information will be needed when you call: integrated features, the ease of operation, and the reliability of your new equipment will allow you to concentrate on your business and leave the printing to your Printer Customer Account Name:
Resumo do conteúdo contido na página número 5
TABLE OF CONTENTS SAFETY NOTES................................................................. 2 OFF LINE MENUS ............................................................ 19 General Information ....................................................... 19 PRINTER OVERVIEW........................................................ 5 Printer Menu - Entry ....................................................... 20 Left Side View.................................................................. 5 1. Au
Resumo do conteúdo contido na página número 6
XES Synergix 8825/8830 Printer Operator Manual 2 SAFETY NOTES Your Printer has been designed and tested to meet strict safety This product is equipped with a three-wire, grounding-type plug (i.e., requirements. These include safety agency examination and a plug having a grounding pin). This plug will only fit into a approval and compliance with established environmental standards. grounding-type power outlet. This is a safety feature. To avoid the risk of electric shock, contact your e
Resumo do conteúdo contido na página número 7
SAFETY NOTES (continued) Slots and openings in the cabinet and in the back and bottom of the Unplug the printer from the wall outlet and refer all servicing to printer are provided for ventilation. To ensure reliable operation of qualified service personnel under the following conditions: the printer and to protect it from overheating, never position the When the power cord is damaged or frayed. printer so that these openings are near a radiator or heat register. If liquid has been spilled into
Resumo do conteúdo contido na página número 8
XES Synergix 8825/8830 Printer Operator Manual 4 SAFETY NOTES (continued) GROUND FAULT PROTECTION The printer is equipped with an additional safety feature, a Ground Fault Interrupter (GFI). This safety device will remove all power to the printer if an electrical fault is detected by the GFI. In the event that power is interrupted to the printer, locate the GFI safety device located on the right side of the printer next to the power cord: Check that a red indicator appears in the window (A
Resumo do conteúdo contido na página número 9
PRINTER OVERVIEW LEFT SIDE VIEW Control Panel Make keypad entries and read the printer Output Tray status and messages here. Supports the prints in the exit area. Cut Sheet Feed-In Drawer 1 (Top) Shelf Open to load paper Insert the cut sheets rolls and to clear here to bypass the roll media jams. media in drawers. Lower the cover to remove jammed media. (Optional on the 8825.) Drawer 2 (Middle) Open to load paper rolls and to clear media jams. Front Door (Optional on the Provides an access 8825
Resumo do conteúdo contido na página número 10
XES Synergix 8825/8830 Printer Operator Manual 6 PRINTER OVERVIEW RIGHT SIDE VIEW Toner Supply Access Cover Open to replace the toner cartridge. Controller Option Interfaces to the client/host and formats incoming prints. Controller On/Off Switch Switches the Cutter Drawer controller on Open to clear and off. media jams in the cutter. Ground Fault Protector Removes power to printer Printer On/Off Power Cord if an electrical fault is Switch Connection detected. Connect the Switches the powe
Resumo do conteúdo contido na página número 11
PRINTER OVERVIEW FRONT VIEW (front door open) Toner Waste Container Replace at stated intervals. XES Synergix 8825/8830 Printer Operator Manual 7
Resumo do conteúdo contido na página número 12
XES Synergix 8825/8830 Printer Operator Manual 8 PRINTER OVERVIEW Graphic Display CONTROL PANEL Indicates the jam locations and any open doors. Language Button Message Display (Note; The LED on Selects a secondary Provides 2 lines by 40 Drawers 3 will not be present language for the character alphanumeric on the 8825.) message display display of printer status (option). and menus. Media Button Activates the Media Menu to select the size and the type of media that is loaded in printer.
Resumo do conteúdo contido na página número 13
POWER ON/OFF Switching On and Off Switching Off 1. Press the Controller power switch PRINTER IS WARMING UP B (B) to the Off (0) position. L9......L0 2. Press the printer power switch (A) to the off (0) position A • The printer will count down briefly from L9 to L0 while the fuser is warming up to the operating temperature. Switching On Note: Load media in the drawers • After the count down is complete, the printer will be On Line and ready to before switching on the power or print. after the pr
Resumo do conteúdo contido na página número 14
XES Synergix 8825/8830 Printer Operator Manual 10 POWER ON/OFF Power Saver, Rest Modes POWER SAVER MODE FUSER IS AT LOW REST MODE FUSER IS OFF POWER. PRESS [ENTER] TO WARM UP PRINTER PRESS [ENTER] TO WARM UP PRINTER. The printer will go through two stages of power conservation after a preprogrammed time interval of no print activity or control panel activity: 2) REST MODE In the Rest mode, a minimum of power is supplied to the printer. 1) POWER SAVER MODE Using the printer me
Resumo do conteúdo contido na página número 15
MEDIA INFORMATION Loading the Rolls of Media A A 1 2 3 2. Squeeze the two knobs (A) Note: Load media in the drawers 4. Lift out the used roll of media. 5. Stand the roll assembly on end. together in order to release the before switching on the power or 6. Squeeze the lever at the end of latch. after the printer is ready to print. the Media Roll Support Tube 3. Rotate the roll to rewind the and remove the tube from the remaining media onto the roll. used roll of media. 1. Raise the output tray (
Resumo do conteúdo contido na página número 16
XES Synergix 8825/8830 Printer Operator Manual 12 MEDIA INFORMATION Loading the Rolls of Media 7. Slide the Media Roll Support 10. Ensure that the Media Roll Support Tube is seated correctly on the 9. Lift the new roll into the media Tube into the new roll of media. drawer, lead edge down and in. support rollers. 8. Squeeze the lever at the end of 11. Remove the tape from the lead edge of the media roll. the Media Roll Support Tube, NOTE: Ensure that all of the glue from the tape is remo
Resumo do conteúdo contido na página número 17
MEDIA INFORMATION Loading the Rolls of Media A 13. Squeeze the two knobs on the 12. If the lead edge of the roll is torn 15. Squeeze the two knobs on the 16. Center the lead edge of the Baffle and lift up to open the Baffle and lower the Baffle into media in the registration window. or uneven, trim off the lead edge Baffle. of the media. place. NOTE: Trimming is usually not 14. Rotate the media roll to feed the media under the Baffle and necessary for a new roll of media. beyond the registratio
Resumo do conteúdo contido na página número 18
XES Synergix 8825/8830 Printer Operator Manual 14 MEDIA INFORMATION Loading the Rolls of Media 17. Press down on the center of the 18. Push in the Media Roll Drawer. baffle in order to lock the Baffle 19. Refer to instructions on the into position. following page in order to NOTE: Ensure that the lead edge of program the Media View Menu the media is still aligned in the for the media you loaded in the registration window. drawer. 20. Lower the output tray.
Resumo do conteúdo contido na página número 19
MEDIA INFORMATION Media View Menu INITIALIZING MEDIA SUPPLY PRESS [MEDIA] TO CHANGE MEDIA TYPE/WIDTH, [EXIT IF NO CHANGE A After opening a media drawer and/or loading the media, the printer message 1. Press the Media button (A) in order to access the Media View Menu from will prompt you to change the size and type of media in the Media View Menu. the on-line or off-line mode. The Media button on the Control Panel is the means of access to the Media View Menu. The Media View Menu contains three
Resumo do conteúdo contido na página número 20
XES Synergix 8825/8830 Printer Operator Manual 16 MEDIA INFORMATION Media View Menu (cont.) SELECT MEDIA WIDTH <36.0 INCH> MEDIA IN IS 36.0 INCH BOND [ENTER] TO CHANGE 4. Press the Next or the Previous button in order to scroll through the media 2. Press the Next or the Previous button in order to scroll through the current sizes. media selections: • Press the Enter button in order to select a media size: • Roll 1 5. Press the Exit button in order to go back to the media source
