Manual do usuário Paxar Wireless Ethernet Print Server Monarch 7411

Resumo do conteúdo contido na página número 1

ETHERNET SETUP GUIDE
The Monarch ® 7411 ™ wireless Ethernet Print Server lets you communicate
with a Monarch ® 9855® or 9860™ printer on a 10baseT or 100baseTX wired
Ethernet network or on an 802.11b or 802.11g wireless network. The print
server operates in Ad-Hoc (peer-to-peer) mode or infrastructure (access
point) wireless mode. You can also remotely manage and download print
batches, formats, printer configurations, and fonts. MonarchNet2™ software
is available on your printer

Resumo do conteúdo contido na página número 2

3. Press Enter/Pause to select the internal port. After setting the port to internal, change the mode to enable bi-directional communications. 4. Press or until you see PARALLEL COMM Mode 5. Press Enter/Pause. You will see MODE Compatible 6. Press to display the other option, IEEE1284, and press Enter/Pause. This selects IEEE1284 for bi-directional Ethernet communications. (Compatible mode is used with a computer connection and a parallel cable.) Set the Port

Resumo do conteúdo contido na página número 3

When the printer is turned on, the print server runs through a set of power-up diagnostics for a few seconds. All three LEDs blink momentarily, then indicate the following activity: LED Indicators Status solid printer is on Orange blinking error off printer is off solid Ethernet link (wired 10baseT) Yellow blinking network activity off no Ethernet connection solid Ethernet link (wired 100baseTX) Green blinking network activity off no Ethernet connection solid wireless link Ye

Resumo do conteúdo contido na página número 4

Configuring the Print Server 1. Start your Web browser. 2. Type in your printer’s IP address (for example, 192.0.0.192) on your computer and press Enter/Pause on the printer. If you are not sure of your printer’s IP address, print a configuration label. The printer’s display shows the “N” network symbol or the antenna symbol when the printer is connected and ready to receive data. Note: A MonarchNet2 manual is available and included in the licensing fee. Contact your sales representativ