Resumo do conteúdo contido na página número 1
C7300/C7500 V2
C9300/C9500 V2
network guide
Resumo do conteúdo contido na página número 2
PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily consti
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Self-diagnostic test. . . . . . . . . . . . . . . . . . . . . . . . . . .7 Configuration utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Available utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Us
Resumo do conteúdo contido na página número 4
Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Network printer IP address configuration . . . . . . . . . . 53 Windows 95/98/Me . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Windows NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Novell Netware IPX . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 5
NETWORK CONFIGURATION Introduction Your printer incorporates a fast 100BASE-TX/10BASE-T network interface. This user’s guide explains the functionality of the built in network interface. Access for interconnection and producing self- diagnostic test and configuration printouts is provided via an interface panel at the rear of the printer. This network interface supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP and can detect those frame types automatically. Also, the interface supports major p
Resumo do conteúdo contido na página número 6
Specification Frame types IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO Network interface 100BASE-TX 10BASE-T Network protocols TCP/IP Network layer ARP, RARP, IP, ICMP Session layer TCP, UDP Application layer LPR, FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP, Rendezvous IPX/SPX (NetWare) Remote printer mode (up to eight file servers and 32 queues) Print server mode over IPX/SPX (up to eight print servers) Encrypted password supported in print server mode SNMP EtherTalk ELA
Resumo do conteúdo contido na página número 7
Self-diagnostic test With the printer power switched on, press the push-button located on the network interface panel (at the rear of the printer) for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. On the first page of the Network Information that is printed out, under the heading General Information the MAC Address is given. For example: MAC Address 00808784E3F1 From this information: the Ethernet address is: 00:80:87:84:E3:F1 Netw
Resumo do conteúdo contido na página número 8
Configuration utility Available utilities You can configure the network interface (NIC) by using one of the following methods: Utility Features System requirements Quick Setup Configure the NIC easily and simply Windows95/98/Me/NT4.0/2000/ without installing any software XP (TCP/IP protocol or IPX/SPX packages into your system. You can protocol should be installed). set the following: To create a NetWare queue, Enable/disable TCP/IP, NetWare, NetWare Client 32 or IntranetWare EtherTalk, NetB
Resumo do conteúdo contido na página número 9
Using Quick Setup Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advance
Resumo do conteúdo contido na página número 10
The following explanation uses Windows 98 as an example. 1. Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double- click \setup.exe (in the root directory) on the CD-ROM. 2. Select [Network Card Setup] 3. Select [Network Card Quick Setup]. 4. Select the appropriate language. 5. Follow the on-screen instructions. > The NetWare Client 32 or IntranetWare Client should be installed on the PC used for the creation of network q
Resumo do conteúdo contido na página número 11
To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed on to your system. The following explanation uses Windows 98 as an example. Installation 1. Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double- click \autorun.exe (in the root directory) on the CD-ROM. 2. Select [Network Card Setup]. 3. Select [Network Card Standard Setup]. 4. Select the appropriate language. 5. Follow the on-screen
Resumo do conteúdo contido na página número 12
Interface Select [Start]-[Programs]-[Oki Setup Utility]-[Admin Manager]. File menu In the [File] menu, the following item can be selected: Item Function Search Search printers in your network and list all printers that have the OkiLAN 7100e, 7100e+, 7200e, 7300e and 8100e installed. Status Menu In the [Status] menu, the following items can be selected: Item Function Printer Status Current printer status is displayed: System Status Displays current NIC configuration. Configuration data can be
Resumo do conteúdo contido na página número 13
Item Function List of Configuration Items Displays current NIC configuration. Configuration data can be saved as log file. Setup Menu In this menu, the following items can be selected: Item Function Oki Device Setup Configure the network interface (NIC). Setup by HTTP Launch the default browser in your environment to access the selected printer’s web page. Setup by TELNET Launch TELNET application in your environment to access the selected printer’s TELNET port. Note: The TELNET application
Resumo do conteúdo contido na página número 14
Oki Device Setup Oki Device Setup allows you to configure the network interface. Type the root password (default value is the last 6 characters of the MAC address) to configure. Remember that the root password is case sensitive and if the MAC address contains any alpha characters, type them as upper case. Oki Device Setup contains details for the following selectable tabs: >General > SNMP >TCP/IP > POP >NetWare > SMTP > NetBEUI > Maintenance >EtherTalk The following section explains each tab’s f
Resumo do conteúdo contido na página número 15
TCP/IP Tab This allows you to configure TCP/IP related items. Location Comments Use TCP/IP Set TCP/IP protocol as enabled/disabled. Protocol Use DHCP/ Check this item if IP address, subnet mask, default gateway and IP BOOTP addresses for DNS primary server and secondary servers are retrieved from the DHCP or BOOTP server. Otherwise, uncheck. Use RARP Check this item if IP address is retrieved from the RARP server. Otherwise, uncheck. IP Address Set the IP address of the selected network i
Resumo do conteúdo contido na página número 16
Location Comments Print Server Name Set Print Server name. Frame Type Set primary NetWare frame type. Operation Mode Set NetWare mode. Check box besides Bindery Check if you want to use the Bindery mode and Bindery Setup Setup button becomes available. If it is unchecked, the button is greyed out. Bindery Setup Configure items related to Bindery mode. In this dialogue box, the following items can be configured. Available File Server and Select file servers to Selected File Server. connec
Resumo do conteúdo contido na página número 17
Location Comments RPRINTER Setup Available if you select RPRINTER mode in Operation Mode. By selecting the [RPRINTER] button, this is displayed: NDS or Bindery Show the Available print server tree in NDS mode or Bindery mode. Available print server and Select file servers to Selected print server connect. Up to eight fileservers can be selected. Select a server from Available file server list and click >> button. The server is copied to Selected file server box. Time Out Set duration
Resumo do conteúdo contido na página número 18
EtherTalk Tab This allows you to configure EtherTalk related items Location Comments Use EtherTalk Protocol Set EtherTalk protocol to enabled/disabled. Printer Name Set EtherTalk Printer object name. Zone Name Set the zone name to which the printer belongs. NetBEUI Tab This allows you to configure NetBEUI related items. Location Comments Use NetBEUI Protocol Set NetBEUI protocol to enabled/disabled. Computer Name Set a computer name for the printer. Workgroup Set a work group name to which the
Resumo do conteúdo contido na página número 19
SNMP Tab This allows you to configure SNMP related items. Location Comments Authentic This community name is used to check whether incoming SNMP Community requests have the correct community name or not. The community name is displayed as ****** for security reasons. TRAP Community This community name is assigned to outgoing system traps such as cold start, authentication failure, etc. TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap is disabled. Sys
Resumo do conteúdo contido na página número 20
Location Comments Printer Trap By selecting the button, the following dialogue box is displayed: Setup . . . In the dialogue box, the following items can be configured: Printer Trap This community name is assigned to outgoing Community Name printer status traps such as off-line, paper out, etc. TCP#1—5 Set the IP address to which a Trap packet will be sent. You can set up to five IP addresses. Detail . . . By selecting the button, the following dialogue box is displayed: In the dialogue bo
