Manual do usuário Minolta Universal Carrier UC-6

Resumo do conteúdo contido na página número 1

MINOLTA READER/PRINTERS
MOUNTING
INSTRUCTIONS
& USER’S MANUAL
For UC-6
Universal
Carrier
Step 1
First, remove
the zoom
lens from
the unit.

Resumo do conteúdo contido na página número 2

MOUNTING INSTRUCTIONS USER’S MANUAL – Speed Control Functions Step 1 Step 2 Speed Rotate the Control Pad carrier base mount 90 3 SPEEDS: degrees as Slow/Medium/High shown in GREY BUTTONS photo at right. Slow Speed RED BUTTONS *Hold down RED BUTTON and pull handle out Medium Speed & to open glass flats to engage High Speed. *High Speed Step 3 Step 2 Position the UC-6 Carrier as Press down shown. Pull out on GREY the lower base BUTTON to plate of the UC-6 SLOWLY Carrier and pull advance or

Resumo do conteúdo contido na página número 3

USER’S MANUAL – Film Loading MOUNTING INSTRUCTIONS Step 5 Step 5 After lower plate of UC-6 Carrier is in position on the base mount, push the lower plate until it stops. Thread film under the white guide rollers, between the glass flats to the quick take up reel. Step 6 Step 6 Once the UC-6 Carrier is securely attached to the base mount, install zoom lens and plug carrier into unit. The Carrier has two manual knobs which are used to manually advance or rewind the film.

Resumo do conteúdo contido na página número 4

USER’S MANUAL – Film Guide Settings USER’S MANUAL – Film Loading Step 3 Step 1 Adjustable Film Guides PULL OUT for 35mm Setting 35MM SETTING 35mm setting shown TO THREAD FILM: Pull handle to open top glass. Step 4 Step 2 Adjustable Film Guides PUSH IN for 16mm Setting 16MM SETTING 16mm setting shown LOAD FILM ON LEFT SPINDLE: Feed film from over the top of reel.