Resumo do conteúdo contido na página número 1
C54x Series
User's Guide
www.lexmark.com
Machine type(s):
5025
Model(s):
210, 230, 410, 430, 43W, 439, n01, n02, dnw, xd1, xd2, dn1, dn2, gd1, gd2, dw1, dw2, dt1, dt2, gt1, gt2
Resumo do conteúdo contido na página número 2
Contents Safety information.......................................................................................5 Learning about the printer...........................................................................7 Thank you for choosing this printer!.........................................................................................................7 Finding information about the printer.....................................................................................................
Resumo do conteúdo contido na página número 3
Supported paper sizes, types, and weights.............................................................................................50 Printing......................................................................................................55 Printing a document................................................................................................................................55 Printing specialty documents........................................................................
Resumo do conteúdo contido na página número 4
24x paper jam........................................................................................................................................124 250 paper jam.......................................................................................................................................124 Troubleshooting.......................................................................................125 Understanding printer messages...........................................................
Resumo do conteúdo contido na página número 5
Safety information CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical connection. Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This prod
Resumo do conteúdo contido na página número 6
SAVE THESE INSTRUCTIONS. Safety information 6
Resumo do conteúdo contido na página número 7
Learning about the printer Thank you for choosing this printer! We've worked hard to make sure it will meet your needs. To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site. We're committed to delivering performance and value with our printers, and we want to
Resumo do conteúdo contido na página número 8
What are you looking for? Find it here The latest supplemental information, updates, and technical Lexmark Support Web site— support: http://support.lexmark.com � Documentation Note: Select your region, and then select your product to view the appropriate support site. � Driver downloads Support telephone numbers and hours of operation for � Live chat support your region or country can be found on the Support Web � E-mail support site or on the printed warranty that came with your � Telephone su
Resumo do conteúdo contido na página número 9
5 1 4 2 3 1 102 mm (4 in.) 2 508 mm (20 in.) 3 152 mm (6 in.) 4 76 mm (3 in.) 5 254 mm (10 in.) Printer configurations Basic model Note: Your printer model may have come with a 650-sheet duo drawer. Learning about the printer 9
Resumo do conteúdo contido na página número 10
1 4 2 3 1 Standard exit bin 2 Standard 250-sheet tray (Tray 1) 3 Manual feeder 4 Printer control panel Fully configured model The following illustration shows a fully configured printer model with a 650-sheet duo drawer and an optional 550-sheet tray: Note: Some printer models may not support the optional 550-sheet tray. Learning about the printer 10
Resumo do conteúdo contido na página número 11
1 2 3 1 Standard 250-sheet tray (Tray 1) 2 650-sheet duo drawer with integrated multipurpose feeder (Tray 2) 3 Optional 550-sheet tray Learning about the printer 11
Resumo do conteúdo contido na página número 12
Understanding the printer control panel 12 3 Menus Back Stop 7 6 5 4 Item Description 1 Display Shows messages that communicate the status of the printer 2 Select Press to initiate action on a menu item. 3 Indicator light Indicates the printer status: � Off—The printer is off. � Blinking green—The printer is warming up, processing data, or printing. � Solid green—The printer is on, but idle. � Blinking red—Operator intervention is needed. 4 Stop/Cancel Stops all printer activity A list of optio
Resumo do conteúdo contido na página número 13
Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. You can customize your printer connectivity and memory capacity by adding op
Resumo do conteúdo contido na página número 14
Accessing the system board to install internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Note: This operation requires a #2 Phillips screwdriver. 1 Remove the cove
Resumo do conteúdo contido na página número 15
b Gently pull the cover away from the printer, and then remove it. 2 Use the illustration below to locate the appropriate connector. Warning—Potential Damage: System board electrical components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. Additional printer setup 15
Resumo do conteúdo contido na página número 16
1 2 1 Flash memory card connector 2 Memory card connector Additional printer setup 16
Resumo do conteúdo contido na página número 17
Installing a memory card The system board has one connector for an optional memory card. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Access the system board. Additional pr
Resumo do conteúdo contido na página número 18
2 Open both latches on the connector completely. 3 Unpack the memory card. Note: Avoid touching the connection points along the edge of the card. 4 Align the notches on the memory card with the ridges on the connector. 5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card. 2 1 1 Notch 2 Latch Additional printer setup 18
Resumo do conteúdo contido na página número 19
6 Reinstall the system board access cover. Installing a flash memory card CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Access the system board. Additional printer setup 19
Resumo do conteúdo contido na página número 20
2 Unpack the memory card. Note: Avoid touching the connection points along the edge of the card. 3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. This ensures the metal pins line up correctly as well. 11 1 22 2 1 Plastic pins 2 Metal pins 4 Push the card firmly into place. Notes: � The entire length of the connector on the card must touch and be flush against the system board. � Be careful not to damage the connectors. Additional printer set
