Resumo do conteúdo contido na página número 1
Lexmark E360d and E360dn Series
User's Guide
August 2011 www.lexmark.com
Machine type(s):
4513
Model(s):
420, 430
Resumo do conteúdo contido na página número 2
Contents Safety information.......................................................................................5 Learning about the printer...........................................................................7 Thank you for choosing this printer!.........................................................................................................7 Finding information about the printer.....................................................................................................
Resumo do conteúdo contido na página número 3
Printing......................................................................................................49 Printing a document................................................................................................................................49 Printing specialty documents..................................................................................................................50 Printing information pages..................................................................
Resumo do conteúdo contido na página número 4
201 paper jam.........................................................................................................................................97 202 paper jam.........................................................................................................................................98 231 paper jam.........................................................................................................................................99 233 paper jam............................
Resumo do conteúdo contido na página número 5
Safety information CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical connection. Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This prod
Resumo do conteúdo contido na página número 6
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. See the product User's Guide for additional safety information. SAVE THESE INSTRUCTIONS. Safety information 6
Resumo do conteúdo contido na página número 7
Learning about the printer Thank you for choosing this printer! We've worked hard to make sure it will meet your needs. To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site. We're committed to delivering performance and value with our printers, and we want to
Resumo do conteúdo contido na página número 8
What are you looking for? Find it here The latest supplemental information, updates, and technical Lexmark Support Web site— support: http://support.lexmark.com � Documentation Note: Select your region, and then select your product to view the appropriate support site. � Driver downloads Support telephone numbers and hours of operation for � Live chat support your region or country can be found on the Support Web � E ‑mail support site or on the printed warranty that came with your � Telephone s
Resumo do conteúdo contido na página número 9
5 1 4 3 2 1 Rear 300 mm (12 in.) 2 Right side 200 mm (8 in.) 3 Front 300 mm (12 in.) 4 Left side 12.7 mm (0.5 in.) 5 Top 300 mm (12 in.) Printer configurations Basic model The following illustration shows the printer front with its basic features or parts: Learning about the printer 9
Resumo do conteúdo contido na página número 10
1 Front door release button 2 Paper stop 3 Standard exit bin 4 Printer control panel 5 System board door 6 Standard 250 ‑sheet tray (Tray 1) 7 Multipurpose feeder door 8 Front door The following illustration shows the printer back with its basic features or parts: Learning about the printer 10
Resumo do conteúdo contido na página número 11
1 Rear door 2 Ethernet port Note: The Ethernet port is a feature on network models only. 3 USB port 4 Parallel port 5 Printer power cord socket 6 Power switch 7 Locking device port Learning about the printer 11
Resumo do conteúdo contido na página número 12
Configured models The following illustration shows the printer configured with an optional drawer: 1 Front door release button 2 Paper stop 3 Standard exit bin 4 Printer control panel 5 System board door 6 Standard 250 ‑sheet tray (Tray 1) 7 Optional 250 ‑ or 550 ‑sheet drawer (Tray 2) 8 Multipurpose feeder door 9 Front door Using the standard exit bin and paper stop The standard exit bin holds up to 150 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin includes a pap
Resumo do conteúdo contido na página número 13
To open the paper stop, pull it so it flips forward. Notes: � Do not leave the paper stop in the open position if you are printing on transparencies. Doing so may cause creases in the transparencies. � When moving the printer to another location, make sure the paper stop is closed. Learning about the printer 13
Resumo do conteúdo contido na página número 14
Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. You can customize your printer connectivity and memory capacity by adding o
Resumo do conteúdo contido na página número 15
1 Ethernet connector Note: The Ethernet port is a feature on network models only. 2 USB port 3 Parallel connector 4 Memory card connector 5 Optional card connector 6 Optional card connector Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to t
Resumo do conteúdo contido na página número 16
An optional memory card can be purchased separately and attached to the system board. To install the memory card: 1 Turn the printer off. 2 Access the system board. 3 Unpack the memory card. Note: Avoid touching the connection points along the edge of the card. 4 Align the memory card with its connector on the system board. 5 Push open the latches on both ends of the memory connector. Warning—Potential Damage: Memory cards are easily damaged by static electricity. Touch a grounded metal surface
Resumo do conteúdo contido na página número 17
It may require some force to fully seat the card. 7 Ensure that each latch fits over the notch on each end of the card. 8 Close the system board door. 9 Turn the printer back on. 10 Open the printers folder: a Click , or click Start and then click Run. b In the Start Search or Run box, type control printers. c Press Enter, or click OK. The printers folder opens. 11 Right ‑click your printer icon. 12 Click Properties. 13 Click Install Options. Note: Memory cards designed for other printers may no
Resumo do conteúdo contido na página número 18
Installing a flash memory or firmware card The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then
Resumo do conteúdo contido na página número 19
4 Push the card firmly into place. Notes: � The entire length of the connector on the card must touch and be flush against the system board. � Be careful not to damage the connectors. 5 Close the system board door. Installing hardware options Installing a 250 ‑ or 550 ‑sheet drawer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. Additional printer setup 19
Resumo do conteúdo contido na página número 20
An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. The printer supports one optional drawer; you can install a 250 ‑ or 550 ‑sheet drawer. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn