Manual do usuário Infinity CascadeTM Three C

Resumo do conteúdo contido na página número 1

™
CASCADE
™
INFINITYCASCADE SPEAKERSYSTEMS
Owner’s Guide
Model Five
Model Seven
Model Nine
Model Three V
Model Three C

Resumo do conteúdo contido na página número 2

™ Model Five INFINITY CASCADE SERIES The Infinity Cascade Series of loudspeakers continues Infinity’s long- standing commitment to accurate sound reproduction. Our patent-pending ™ ™ Maximum Radiating Surface (MRS ) technology, patented Ceramic Metal ® Matrix Diaphragm (CMMD ) drivers, precision dividing networks and rigid, well-braced enclosures, along with our newly developed, patent-pending ™ Cleats ™ Constant Acoustic Impedance (CAI ) waveguide, combine to deliver uncompromised performance i

Resumo do conteúdo contido na página número 3

Home Theater PLACEMENT For front-channel use, place one speaker on the left and another on the right, along either side of the television monitor. Since the speakers are Stereo magnetically shielded, you can place them near the TV without worrying Before deciding where to place your Cascade speakers, survey your room about the magnetic field distorting the TV picture. and think about placement, keeping the following points in mind and using Figure 1 as a guide: For surround-channel use, place s

Resumo do conteúdo contido na página número 4

Model Nine and Model Seven ASSEMBLY 1. Remove floor It is strongly recommended that two people assemble the speakers stand from carton. to minimize the possibility of damage or injury. 2. Slide loud- speaker onto Installing Spiked Feet (Model Nine and Model Seven) stand, making 1. Open spike kit and locate the following items: feet (with spike/round sure the aligning ends), four locking nuts, four nylon domes and one wrench. posts are lined up 2. Lay each stand on its side and locate the fo

Resumo do conteúdo contido na página número 5

Attaching the Grilles WALL-MOUNTING The Cascade loudspeakers use a unique frameless grille. Each end of the grille cloth contains a magnet. Simply curl the magnet assembly behind NOTE: The customer is responsible for the correct selection and use of the grille cloth, place one end of the grille just above the tweeter and mounting hardware (available through hardware stores) that will ensure then gently pull the grille taut, attaching the other end of the grille just the proper and safe wall-moun

Resumo do conteúdo contido na página número 6

WIRING THE SYSTEM IMPORTANT: Make sure all equipment is turned off before making any connections. For speaker connections, use a high-quality speaker wire with polarity coding.The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options. To ensure proper polarity, connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal

Resumo do conteúdo contido na página número 7

FINAL ADJUSTMENTS BI-WIRING Check the speakers for playback, first by setting the system volume con- The outer connection panel and internal dividing network of the Cascade trol to a minimum level, and then by turning on the power of your audio loudspeakers are designed so that separate sets of speaker cables can system. Play a favorite music or video segment and increase the system be attached to the low-frequency transducer and midrange/high- volume control to a comfortable level. frequency tr

Resumo do conteúdo contido na página número 8

SPECIFICATIONS Model Nine Model Seven Model Five Frequency Response: 80Hz – 20kHz (±3dB) 100Hz – 20kHz (±3dB) 100Hz – 20kHz (±3dB) – – – 40kHz ( 6dB) 40kHz ( 6dB) 40kHz ( 6dB) Recommended Amplifier Power Range: 10 – 150 Watts 10 – 100 Watts 10 – 150 Watts Sensitivity: 87dB 85dB 85dB (2.83V @ 1 meter) Nominal Impedance: 8 Ohms 8 Ohms 8 Ohms Crossover Frequency: 1,500Hz; 24dB/octave 1,800Hz; 24dB/octave 1,800Hz; 12dB/octave Mid-Bass Driver(s): Dual 7-3/4" x 3-3/8" 7-3/4" x 3-3/8" 7-3/4" x 3-3/8" ®