Resumo do conteúdo contido na página número 1
Operating Instructions
AW-HE870N
AW-HE870N
AW-HE870
HIGH
DEFINITION HD Convertible Camera
F0109S1029 D VQTB0350-1
Operating Instructions
HD Convertible Camera
Model No. AW-HE870N
Installation instructions provided
AW-HE870
HIGH
DEFINITION HD Convertible Camera
Before operating this product, please read the instructions carefully and save this manual for future use.
D VQTB0350-1
F0109S1029
Resumo do conteúdo contido na página número 2
- 2 - FCC Note: CAUTION This equipment has been tested and found to comply RISK OF ELECTRIC SHOCK with the limits for a class A digital device, pursuant to DO NOT OPEN Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). interference wh
Resumo do conteúdo contido na página número 3
WARNING: CAUTION: � TO REDUCE THE RISK OF FIRE OR ELECTRIC TO REDUCE THE RISK OF FIRE OR SHOCK SHOCK, DO NOT EXPOSE THIS APPARATUS TO HAZARD AND ANNOYING INTERFERENCE, USE RAIN OR MOISTURE. THE RECOMMENDED ACCESSORIES ONLY. � THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO Note: OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE The rating plate (serial number plate) is on the APPARATUS. bottom of the unit. indicates safety information. - 3 -
Resumo do conteúdo contido na página número 4
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 10) Protect the power cord form being walked on or pinched particularly at plugs, convenience 2) Keep these instructions. receptacles, and the point where they exit from 3) Heed all warnings. the apparatus. 4
Resumo do conteúdo contido na página número 5
Contents Preface ............................................................................... 7 Connection of the Indoor Pan-tilt Head AW-PH400 ...... 30 Connection of the Indoor Pan-tilt Head AW-PH405 ...... 33 Standard accessories ...................................................... 7 Connection of the Outdoor Pan-tilt Head AW-PH650 .... 36 Features ............................................................................. 8 How to operate the system .........................
Resumo do conteúdo contido na página número 6
Contents Menu item setting/changing .......................................... 60 Setting to initial set (Factory presets) .......................... 89 Menu item setting ...................................................... 60 Setting to initial set .................................................... 89 Initial settings of the setting items Menu item setting/changing (Factory preset values) ................................... 90 (Halogen, Fluorescent, Outdoor Mode) ............
Resumo do conteúdo contido na página número 7
Preface This is an HD/SD multi-format camera that adopts 14-bit analog to digital conversion and digital video signal processing, with a compact and lightweight 2/3˝ 3CCD system offering high reliability and availability of multiple functions. Setting and switching of the camera’s status and its various functions can be performed easily with the menu screen system. The camera can be connected with peripheral devices, such as a remote control panel or a pan-tilt head, allowing for system
Resumo do conteúdo contido na página número 8
Features � An optimum condition can be selected to suit the The camera features high reliability through intended use from among four use modes (Halogen, adoption of 14-bit analog to digital conversion Fluorescent, Outdoor, and User). and digital video signal processing. 2 � Supports the SDI card option* (AW-HHD870). � Adopts operating procedures that are the same as Compatible with multiple formats 3 those of our convertible cameras* . � The format can be switched between 1080i, 72
Resumo do conteúdo contido na página número 9
Special notes on operation Turn power off before connecting or disconnecting cables. There is a cooling fan inside. Connection or disconnection of any studio cable or other The cooling fan is a consumable part. cable to any unit of equipment must be performed while Replace it 3 to 5 years after installation as a general rule. power is off. When the cooling fan malfunctions, the “Fan Error” message is displayed when the power is turned ON. When the “Fan Error” message is displayed, reques
Resumo do conteúdo contido na página número 10
Precautions for use DON’TS Do not attempt to disassemble the camera or other units. Do not expose the camera or other units to rain or In order to prevent electric shock, do not remove screws moisture, and do not try to operate the equipment in wet or covers. There are no user-serviceable parts inside. conditions. Do not operate the camera if it becomes wet. Do not abuse the camera. Avoid striking, shaking, etc. Do not operate the camera or other units outdoors during The camera c
Resumo do conteúdo contido na página número 11
Precautions for use DOS Refer any servicing to qualified service personnel. Take immediate action if ever the camera should become wet. Turn the power off and have the unit checked by an Handle the camera with care. authorized service facility. Protect the precision made lens by placing the lens cap Follow normal safety precautions to avoid personal injury. over when the camera is not in use. If the lens is not installed, protect the surface of the prism by placing the Use the
Resumo do conteúdo contido na página número 12
The connection and installation should be done by qualified service personnel or system installers. Precautions for installation Refer any servicing to qualified service personnel. Concerning the installation location of the camera Locations near the air outlet of an air conditioner or near Ensure that the installation location is strong enough to bear a door where the camera will be exposed to incoming at least five times the total weight of the camera, lens, and outside air or other loc
Resumo do conteúdo contido na página número 13
The connection and installation should be done by qualified service personnel or system installers. Precautions for installation Refer any servicing to qualified service personnel. Concerning the mounting screws and drop-prevention Mounting screw (M4) wire Attach the drop-prevention wire as a way to prevent the Drop-prevention wire camera from dropping. Mounting spacer (supplied) When the unit is to be mounted onto a Panasonic pan-tilt head, use the mounting screws and drop-prevention wi
Resumo do conteúdo contido na página número 14
The connection and installation should be done by qualified service personnel or system installers. Precautions for installation Refer any servicing to qualified service personnel. Parts to be provided by the customer for installation Mounting screws (M4): 1 Provide the following parts when the unit is to be mounted (For attaching the drop-prevention wire) onto a surface other than a pan-tilt head. Determine the length of Drop-prevention wire When the unit is to be mounted onto a Panasoni
Resumo do conteúdo contido na página número 15
Major operating controls and their functions Front view / Top view / Rear view / Bottom view 11/16˝ (17.5 mm) 13/16˝ (20 mm) 1-1/4˝ 3/8˝ (10 mm) Mounting screws (Inch screws) (32 mm) 1/4-20UNC, Depth: 3/8˝ (10 mm) 13/16˝ (20 mm) 1-1/4˝ 11/16˝ Mounting screws (Inch screws) (32 mm) (18 mm) 1/4-20UNC, Depth: 3/8˝ (10 mm) - 15 -
Resumo do conteúdo contido na página número 16
Major operating controls and their functions Lens mount MENU switch [MENU] 2/3˝ bayonet type lens or a microscope adapter can be A menu will appear on the monitor screen when MENU mounted. switch is pressed for at least 3 seconds. The menu screen is cleared when the switch is pressed for at least 3 seconds while the menu is displayed. When this switch is pressed while an item is being Lens fixing ring knob changed on a sub menu screen, the set values will revert Mount the lens on the c
Resumo do conteúdo contido na página número 17
Major operating controls and their functions UP/ABB switch [UP/ABB] Video output connector [VIDEO OUT] The item just above can be selected by pressing this A composite video signal is provided at this connector. switch while the menu is displayed. (1 V [p-p], 75 BNC connector) When this switch is pressed while an item is able to be changed on a sub menu screen, the value is adjusted higher. Iris connector [IRIS] When the menu is not displayed or the camera is in Connect the IRIS cable
Resumo do conteúdo contido na página número 18
Major operating controls and their functions Cable clamp DC 12 V input connector [12 V IN] Clamp the DC cable with ø5.5 plug connected to the DC The model AW-PS510A AC adapter (optional accessory) 12 V input connector to prevent it from slipping out. is connected here. Be absolutely sure to secure the DC cable using the For the connection, use a DC cable with ø5.5 plug which cable clamp. is supplied with AW-HE870. G/L input connector [G/L IN] External synchronizing signals (BB) are
Resumo do conteúdo contido na página número 19
The connection and installation should be done by qualified service personnel Mounting or system installers. Refer any servicing to qualified service personnel. When the pan-tilt head has been used Lens mounting Connect the remote cable of the lens to the LENS IF (1) Use the 2/3˝ bayonet type lens (such as the terminal on the pan-tilt head. AW-LZ17MD9AG and AK-LZ20M85G), available as an optional accessory. When the SDI card (AW-HHD870) is installed Note without using the pan-tilt hea
Resumo do conteúdo contido na página número 20
The connection and installation should be done by qualified service personnel Mounting or system installers. Refer any servicing to qualified service personnel. Mounting the camera onto a pan-tilt head, tripod, camera mounting bracket, or other part 1. Use the camera mounting screw holes to mount onto a Camera mounting screw holes (Inch screws: 1/4-20UNC), pan-tilt head, tripod, camera mounting bracket, or other Depth: 3/8˝ (10 mm) part. 2. Fit the supplied mounting spacer into the came
