Resumo do conteúdo contido na página número 1
COMPACT VHS CAMCORDER
ENGLISH
GR-AXM310
GR-AXM210
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the bottom of
cabinet. Retain this information for
future reference.
Model No.
INSTRUCTIONS
Serial No.
LYT0252-001C EN
Resumo do conteúdo contido na página número 2
2 EN Dear Customer, WARNING: Thank you for purchasing the JVC Compact VHS TO PREVENT FIRE OR SHOCK camcorder. Before use, please read the safety information and precautions contained in the HAZARD, DO NOT EXPOSE following pages to ensure safe use of this product. THIS UNIT TO RAIN OR MOISTURE. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (Z pg. 7). • Notes appear after most subsections. Be sure to read Warning on lithium battery these as
Resumo do conteúdo contido na página número 3
EN3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product SAFETY INSTRUCTIONS and to protect it from overheating, these openings must not be blocked or covered. Electrical energy can perform many useful functions. •Do not block the openings by placing the product on a But improper use can result in potential electrical bed, sofa, rug or other similar surface. shock or fire hazards. This product has been •Do no
Resumo do conteúdo contido na página número 4
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a • Do not place this product on an unstable cart, marked change in performance and you are unable stand, tripod, bracket or table. It may fall, causing to restore normal operation by following the detailed serious injury to a child or adult, and serious procedure in its operating instructions, do not damage to the product. attempt to service it yourself as opening or r
Resumo do conteúdo contido na página número 5
QUICK OPERATION GUIDE EN5 SUPPLY POWER INSERTING A VIDEO CASSETTE A Hook on. B Push in. PUSH Button EJECT Switch BATTERY RELEASE Using the battery pack 1 Open the LCD monitor to an angle of over 60 Hook its end to the camcorder ( ) and push the battery pack in until it locks in place ( ). degrees. (Charging procedure, Z pg. 8) 2 Slide EJECT to open the cassette holder. 3 Insert a video cassette. To remove the battery pack 4 Press PUSH to close the cassette holder. Slide BATTERY RELEASE and pull
Resumo do conteúdo contido na página número 6
MAJOR FEATURES 6 EN REMEMBER Menu Adjustment (Z pg. 30, 31, 32) The Logical Choice Integrated Auto Light (GR-AXM310 only) (Z pg. 23) The only compact video Picture Stabilizer (Z pg. 22) cassettes that can be used with your VHS VCR* Program AE with Special Effects (Z pg. 26, 27) n Electronic Fog Filter n ND Effect Digital Hyper Zoom n Sepia (Z pg. 20) n Twilight Zoom in n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Zoom out LCD Color Monitor (Z pg. 18) PROVIDED ACCESSORIES •AC Power Adapt
Resumo do conteúdo contido na página número 7
CONTENTS EN7 GETTING STARTED 8 – 15 Power............................................................................................................ 8 Clock (Lithium) Battery Insertion/Removal .............................................................. 10 Date/Time Settings.......................................................................................... 11 Recording Mode Setting..................................................................................... 12 Tape Length Setti
Resumo do conteúdo contido na página número 8
GETTING STARTED 8 EN Marks Power This camcorder’s 3-way power supply system lets you choose To AC outlet the most appropriate source of power. CHARGE indicator NOTES: c No function is available without power supply. c Use only the specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER 1 Connect the charger’s AC power cord to a wall outlet. REFRESH indicator ATTACH BATTERY PACK 2 Align the marks and slide the ba
Resumo do conteúdo contido na página número 9
EN9 Charge Marker Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time. c Charging times noted on page 8 are f
Resumo do conteúdo contido na página número 10
GETTING STARTED (cont.) 10 EN Slot Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.). REMOVE BATTERY HOLDER 2 Pull out the battery holder. Battery holder INSERT BATTERY IN HOLDER 3 Insert the battery in the holder, and be sure to have the “+” mark visible. RE-INSERT HOLDER 4 Slide the holde
Resumo do conteúdo contido na página número 11
EN11 Date/Time Settings ACCESS MENU SCREEN 1 Set the Power Switch to “PRO.”, then press MENU. •The power lamp comes on. SELECT FUNCTION 2 Rotate the Select Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Menu appears. •If you decide you want to return the date and time MENU Button to the previous settings, rotate the Select Dial to move the highlight bar to “EXIT” and press it, then Power lamp go to step 6. •If you want to set only the time without changing the date,
Resumo do conteúdo contido na página número 12
GETTING STARTED (cont.) 12 EN Recording Mode Setting Set depending on your preference. SET RECORDING MODE 1 First set the Power Switch to “AUTO” or “PRO.”. Press SP/EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the record- ing time. NOTE: MENU Button If the recording mode is switched during recording, the SP/EP Recording Mode Button playback picture will be
Resumo do conteúdo contido na página número 13
EN13 Cassette holder Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 60 degrees. OPEN CASSETTE HOLDER 2 Slide EJECT until the holder opens. Do not use force to open. INSERT/REMOVE CASSETTE 3 Make sure the label is facing outward. PUSH Button EJECT Switch CLOSE CASSETTE HOLDER 4 Press PUSH and make sure the holder is closed and locked. CLOSE LCD MONITOR 5 First make sure the holder is closed. Then close the LCD monitor. Turn to take NOTES: up slack. c Clos
Resumo do conteúdo contido na página número 14
GETTING STARTED (cont.) 14 EN Power Zoom Lever Grip Adjustment EXPAND LOOP 1 Separate the Velcro strip. INSERT HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment SELECT OPERATION MODE 1 Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). 3 3 POSITION VIEWFINDER 2 Adjust the view
Resumo do conteúdo contido na página número 15
EN15 Shoulder Strap Attachment ATTACH STRAP 1 Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure 1 to attach the other end of the strap to the other eyelet 4 3, making sure the strap is not twisted. 2 ADJUST LENGTH 2 Adjust as shown in the illustration at left 4. 3 Tripod Mounting ALIGN AND TIGHTEN 1 Align the screw and camera direction stud on the tripod with the camera’s mounting socke
Resumo do conteúdo contido na página número 16
RECORDING Basic Recording 16 EN LENS COVER Open/Close Ring NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 8) c Recording Mode Setting (Z pg. 12) c Tape Length Setting (Z pg. 12) c Grip Adjustment (Z pg. 14) c Viewfinder Adjustment (Z pg. 14) LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to Pow
Resumo do conteúdo contido na página número 17
EN17 Tape remaining time indicator STOP RECORDING 4 25MIN Press the Recording Start/Stop Button again to stop MIN recording. (Now calculating) •The camcorder re-enters the Record-Standby mode. 120MIN NOTES: c When the Power Switch is set to CAMERA and the LCD 119MIN monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. 3MIN c The cassette holder cannot be opened unless a power supply is attached. c There may
Resumo do conteúdo contido na página número 18
RECORDING Basic Recording (cont.) 18 EN Shooting While Watching The LCD Monitor Before the following steps, perform step 1 (Z pg. 16). 90° 180° ENTER RECORD–STANDBY MODE 2 Make sure the LCD monitor is fully open. Turn the LENS COVER Open/Close Ring to open the lens cover, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). •The power lamp lights and the camcorder enters the Record-Standby mode. •The scene you are aimed at appears in the LCD LENS COVER Open/Close Ring monitor, with the wor
Resumo do conteúdo contido na página número 19
EN19 Journalistic Shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TILT LCD MONITOR 2 Tilt the LCD monitor in the most convenient direction. •The LCD monitor can rotate almost full circle (270°: 90° downward, 180° upward). Interface Shooting The person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor.
Resumo do conteúdo contido na página número 20
RECORDING Basic Features 20 EN FEATURE: Zooming Zoom in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom out Zoom. OPERATION: Zoom In Push the Power Zoom Lever towards “T”. Display Zoom Out Push the Power Zoom Lever towards “W”. Zoom indicator bar n The quicker you push the Power Zoom Lever, the quicker the zoom action. 1X Zoom level indic
