Resumo do conteúdo contido na página número 1
4-157-877-11(1)
Digital HD Video
Camera Recorder
HXR-NX5U/NX5N
Operating Guide
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
© 2009 Sony Corporation
Resumo do conteúdo contido na página número 2
Read this first “Memory Stick” media Before operating this unit, please read this (You cannot use it in your camcorder.) manual thoroughly, and retain it for future reference. To handle the recorded images on your computer b Notes Refer to “Help” on the supplied CD-ROM “Content Management Utility.” � “Memory Stick PRO Duo” media can be used only with “Memory Stick PRO” media compatible equipment. Notes on use � Do not attach a label or the like on “Memory Stick PRO Duo” media or a “Memor
Resumo do conteúdo contido na página número 3
b Notes Do not expose your camcorder’s � The camcorder is not dustproof, dripproof or viewfinder, lens, or LCD screen to the waterproof. sun or strong light source for extended See “About handling of your camcorder” periods. (p. 109). � Connect cables to your camcorder with their � Intense light sources, especially the sun terminals placed the correct way. Squeezing the will converge on the viewfinder or lens terminals into your camcorder's jacks may and damage the internal parts of yo
Resumo do conteúdo contido na página número 4
Read this first (Continued) recordings on a TV, you need an NTSC eject the media and may erase its contents system-based TV. without warning. � Television programs, films, video tapes, Save all your recorded image data and other materials may be copyrighted. To prevent your image data from being lost, Unauthorized recording of such materials save all your recorded images on external may be contrary to the copyright laws. media periodically. It is recommended that � Because of the way that
Resumo do conteúdo contido na página número 5
About this manual � Memory cards and a flash memory unit are both referred to as recording media in this manual. � The images of the LCD screen and the viewfinder used in this manual for illustration purposes are captured using a digital still camera, and therefore may appear different. � The on-screen displays in each local language are used for illustrating the operating procedures. Change the screen language before using your camcorder if necessary (p. 18). � Design and specificatio
Resumo do conteúdo contido na página número 6
Table of Contents Read this first ........................................................................................... 2 Getting Started Step 1: Checking supplied items .............................................................. 9 Step 2: Attaching the supplied microphone and the lens hood with lens cover ............................................................................................. 10 Step 3: Charging the battery pack ...................................................
Resumo do conteúdo contido na página número 7
Editing Operating the MODE menu ....................................................................57 Protecting recorded images (Protect) .....................................................58 Using the Playlist of movies ...................................................................59 Creating the Playlist ............................................................................ 59 Playing the Playlist .............................................................................. 59
Resumo do conteúdo contido na página número 8
Table of Contents (Continued) Troubleshooting Troubleshooting .....................................................................................90 Warning indicators and messages ......................................................... 99 Additional Information Recording time of movies .................................................................... 101 Using your camcorder abroad .............................................................. 103 File/folder structure on the memory card
Resumo do conteúdo contido na página número 9
Getting Started Getting Started Step 1: Checking supplied items Make sure that you have following items Large eyecup (1) (p. 16) supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. � Memory cards are not included. See pages 2 and 106 for types of memory cards that you can use on your camcorder. AC Adaptor/Charger (AC-VL1) (1) (p. 12) Rechargeable battery pack (1) (p. 12, 108) HXR-NX5N: NP-F570 HXR-NX5U: NP-F770 Power cord (mains lead) (1)
Resumo do conteúdo contido na página número 10
Step 1: Checking supplied items Step 2: Attaching the (Continued) supplied microphone Connecting cord (DK-415) (1) (p. 13) and the lens hood CD-ROM “Content Management Utility” (1) with lens cover CD-ROM “Manuals for Digital HD Video Camera Recorder” (1) Attaching the supplied Operating Guide (2) microphone When you use the supplied microphone (ECM-XM1) for recording sound, do the following steps. 1 Attach the wind screen B to the supplied microphone A. 2 Place the microphone A in the
Resumo do conteúdo contido na página número 11
Getting Started pressing the PUSH (lens hood release) button. 4 Put the microphone cable into the cable holder E. z Tips � If you attach or remove a 72mm (2 7/8 in.) PL filter or MC protector, remove the lens hood with lens cover. To open or close the shutter of the lens hood with lens cover Move the lens cover lever to OPEN to open the lens cover, and move the lever to CLOSE to close the lens cover. Hook the cable in the outer cable holder. Attaching the lens hood with lens cover PUSH (
Resumo do conteúdo contido na página número 12
Step 3: Charging the battery pack After charging the battery You can charge the “InfoLITHIUM” battery pack (L series) with the The charge lamp turns off (normal charge). If you continue charging more 1 hour after supplied AC Adaptor/Charger. the charge lamp turns off, you can use the b Notes battery a little longer (full charge). Remove the battery pack from the AC � You cannot use batteries other than the “InfoLITHIUM” battery pack (L series) Adaptor/Charger when the charge is (p. 108).
Resumo do conteúdo contido na página número 13
Getting Started To store the battery pack Using an outside power source If the battery pack is not in use for a while, You can use the AC Adaptor/Charger to run down the battery and store it. See page obtain AC power. 108 for details on storage of the battery pack. To the wall outlet (wall socket) Charging time Power cord Approximate time (min.) required when AC Adaptor/ you charge a fully discharged battery pack. Charger Charge lamp Normal charge Fully charge Battery pack time time NP-F
Resumo do conteúdo contido na página número 14
Step 3: Charging the battery pack Step 4: Turning the (Continued) power on and holding � Even if your camcorder is turned off, AC power your camcorder (house current) is still supplied to it while connected to the wall outlet (wall socket) via the properly AC Adaptor/Charger. To record or play back, set the POWER switch to ON. When you use your camcorder for the first time, the [CLOCK SET] screen appears (p. 17). POWER switch 1 Slide the POWER switch to ON while you press the green bu
Resumo do conteúdo contido na página número 15
Getting Started Step 5: Adjusting the LCD panel and viewfinder 2 Hold the camcorder properly. LCD panel Open the LCD panel 180 degrees (1), then rotate it to the best angle to record or play back (2). 1Open 180 degrees. 290 degrees (max.) 2180 degrees (max.) 3 Ensure a good grip, then fasten the grip belt. DISPLAY button z Tips � Images are displayed as mirror images on the LCD screen, but are recorded as normal images. To turn off the LCD backlight to make the battery last longer To tu
Resumo do conteúdo contido na página número 16
Step 5: Adjusting the LCD panel and viewfinder (Continued) Viewfinder Large eyecup (supplied) Viewfinder lens Attach with the adjustment lever protruding part Move it until the picture at the top. becomes clear. b Notes � You may see primary colors shimmering in the viewfinder when you move your line of sight. This is not a malfunction. The shimmering colors will not be recorded on the recording media. z Tips � You can adjust the brightness of the viewfinder backlight from [VF BACKLIGH
Resumo do conteúdo contido na página número 17
Getting Started Step 6: Setting the date and time Set the date and time when using your camcorder for the first time. If you do not 2 Select (OTHERS) by turning set the date and time, [CLOCK SET] screen the SEL/PUSH EXEC dial, then appears every time you turn on your press the dial. camcorder. z Tips � If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charg
Resumo do conteúdo contido na página número 18
Step 6: Setting the date and time (Continued) The clock starts. � Set [DST SET]/[SUMMERTIME] to [ON] to move the time forward 1 hour. � You can set any year up to the year 2037. � For midnight, set it to 12:00 AM. For midday, set it to 12:00 PM. z Tips � The date and time are automatically recorded on the selected recording media, and can be displayed during playback (DATA CODE button, p. 53). Changing the language setting You can change the on-screen displays to show messages in a specifi
Resumo do conteúdo contido na página número 19
Getting Started Step 7: Inserting a memory card/Attaching a flash memory unit � When you insert a new memory card in Memory card standby mode, the [Create a new Image Database File.] screen appears. Follow the screen indication, and touch [YES]. 1 Open the cover in the direction of the arrow. To eject the memory card Lightly push the memory card once. b Notes � When the access lamp is lit or flashing in red, your camcorder is reading/writing data. Do not shake or knock your camcorder, tur
Resumo do conteúdo contido na página número 20
Step 7: Inserting a memory card/Attaching a flash memory unit (Continued) b Notes � You can only select a slot that already has a memory card inserted. � While movies are being recorded on the memory card, you cannot switch the slot even if you press the memory card slot A/B buttons. z Tips � When only one slot has a memory card inserted, the slot that has the memory card is selected automatically. � If the memory card is fully recorded during recording, the camcorder continues recording
