Resumo do conteúdo contido na página número 8
Using the Touch Pad 8 6 Once scrolling has begun, continue to trace a circle on the Touch Pad without removing your finger from the pad. As long as you are tracing a circle, you can continue scrolling using any position on the Touch Pad. To scroll in the opposite direction, trace a circle in the opposite direction without removing your finger from the Touch Pad. 7 When you finish scrolling, remove your finger from the Touch Pad. Change the settings for the Touch Pad utility 1 Click on the
Resumo do conteúdo contido na página número 9
Using the Touch Pad 9 Reverse vertical scroll- You can change the direction in which the screen scrolls ing (On/Off) when you trace the Touch Pad clockwise. • When check mark is added: Upwards • When check mark is removed: Downwards Activate horizontal If you add a check mark, you can use the horizontal scroll function (On/Off) scroll. Reverse horizontal When you add a check mark for [Activate horizontal scrolling (On/Off) scroll function], you can change the direction in which the screen sc
Resumo do conteúdo contido na página número 10
Using the Touch Pad 10 2 Remove the check mark from [Activate Touch Pad function] in [General settings], and then click [OK]. 3 Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [Device Set- tings]. 4 Click the device name (e.g., Synaptics TouchPad V6.2) in [Devices], then click [Settings]. 5 Click [Virtual Scrolling], add a check mark for the scroll functions you want to use, then click [OK]. 6 Click [OK] at [Mouse Properties]. NOTE Because the Touch Pad utility and
Resumo do conteúdo contido na página número 11
Using the Touch Pad 11 Adjusting the Sensitivity when Touching the Touch Pad Adjust [PalmCheck] and [Touch Sensitivity] using the following procedure: 1 Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [Device Settings]. 2 Click the device name (e.g. Synaptics TouchPad) in [Devices], then click [Settings]. 3 Double-click [Sensitivity], then click [PalmCheck] or [Touch Sensitivity]. 4 After making the adjustment, click [OK]. PalmCheck™ When operating the keyboard, if
Resumo do conteúdo contido na página número 12
Using the Touchscreen 12 Your computer is equipped with a touchscreen function allowing you to perform the same operations as the Touch Pad or mouse by touching the surface of the display with the stylus (included). The following explanation gives one example (for the default settings). The operation settings can be changed. CAUTION When using the stylus to input, avoid touching the screen with your hands, etc. at the same time. Failure to do may result in input erro
Resumo do conteúdo contido na página número 13
Using the Touchscreen 13 To right-click Use on the notification area. A Click on the notification area. changes to . B Click the object you want to right-click. changes to . • If you accidentally change the icon to , click to return to . • appears when you restart the computer after setting up Windows. When needed, the above settings can be configured using the following procedure. A To Display [Touch Panel Configuration] screen. Click [star
Resumo do conteúdo contido na página número 14
Using the Touchscreen 14 CAUTION If a change is made to the display resolution, or the cursor cannot be pointed correctly with the stylus, be sure to cali- brate the Touchscreen. ( page 15) When mouse drivers are installed (e.g., IntelliMouse), the touchscreen function may not be used. When the operation of panning (only the internal LCD) is performed while the display resolution is set higher than the resolution of the internal LCD, the touchscreen function will not work properly. Even wh
Resumo do conteúdo contido na página número 15
Using the Touchscreen 15 Calibrating the Touchscreen When you cannot point correctly with the stylus (include), calibrate the Touchscreen by following the steps below. NOTE Rotate the display to 0 degree before performing the calibration. ( page 18) Calibrate the Touchscreen for each account created. 1 Run [Touch Screen Calibration Utility]. Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility]. 2 Touch t
Resumo do conteúdo contido na página número 16
Using the Touchscreen 16 B Touch the 4 “+” target marks sequentially with the stylus. C Click [OK]. D Select [Portrait] and click [Calibrate]. E Repeat steps B and C above. Handling the Touchscreen Use the stylus included with the computer. Do not use pencils, implements with sharp tips or hard objects for screen oper- ations. The screen may be damaged as a result. Do not place any object on the surface or press down forcefully with sharp-pointed objects (e.g., nails), or hard objects that ca
Resumo do conteúdo contido na página número 17
Using the Touchscreen 17 Suggestions About Cleaning the LCD Surface To improve the outdoor visibility of the display, a low reflection coating has been added. In order to avoid scratches and peel- ing of this coating, an approved soft cloth has been included to wipe the LCD surface of the computer. Before using the com- puter, be sure to read the instructions provided below. • Be sure to wipe the LCD display to remove fingerprints, etc., with the soft cloth. • Do not wipe areas other than the L
Resumo do conteúdo contido na página número 18
Display Rotation 18 After Windows is started up, you can rotate the display and perform the Touch Pad and touchscreen operations in the rotated mode. Rotating the Display 1 Double-click on the notification area or press Alt + X. Each time this operation is performed, the screen display switches between the landscape mode (0 degree) and the previously set angle (below). To select the angle and rotate the display 1 Right-click on the notification area, and then select
Resumo do conteúdo contido na página número 19
Display Rotation 19 NOTE If you shut down Windows when you rotate the display, the Touch Pad and touchscreen do not match the display angle next time you start up Windows for a few seconds. The Touch Pad and the touchscreen may not match the display angle if you change display properties or Intel(R) Graphics Media Accelerator Driver for Mobile when you rotate the display. ( page 119) The display cannot be rotated when the [Command Prompt] is set to “Full Screen” or Setup Utility. When so
Resumo do conteúdo contido na página número 20
Key Combinations 20 NOTE Do not repeatedly press the keys in quick succession. Do not use the key combinations together with Touch Pad (external mouse) , touchscreen (only for CF-T8 Series) or other key operations. Do not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator turns off. On the Setup Utility screen, you can use the key combinations of Fn+F1, Fn+F2 and Fn+F3. By using the key com- binations of Fn+F3, the display is switched between th
