Manual do usuário Transition Networks DVP 5960

Resumo do conteúdo contido na página número 1

MEDIA CONVERTER TECHNICAL SPECIFICATIONS
Host Connection IBM® S/3x (System 34, 36, 38) host, AS/400™ Minneapolis, MN 55344 USA
host or 5x94 remote controller
5250 Copper/Fiber Media Converter
Case dimensions 4.75" x 3.0" x 1.0" (119mm x 76mm x 25mm)
PS-CF-01, PS-CF-01(SC), PS-CF-01(SM)
Shipping Weight 2 pounds (0.9 kilograms)
Environment Temperature: 0-50°C (32-122°F)
USER’S GUIDE
Humidity 10-90%, non condensing
Altitude 0-10,000 feet
The TRANSITION Networks 5250 Copper to Fiber PS-CF-01 seri

Resumo do conteúdo contido na página número 2

Ω Ω PS-CF-01 Installation NOTES CABLE SPECIFICATIONS The physical characteristics of the cable must meet or exceed the following: FIBER CABLE All cable connections to the PS-CF-01 MUST be MULTIMODE AT LEAST 7.6 meters (25 feet) in length. Fiber Optic Cable Recommended: 62.5 / 125 µm multimode fiber Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber Optic Receiver Sensitivity: min: -32.5 dBm max: -14.0 dBm To install the PS-CF-01 series media converter: Wavelength: 850nM -9 Bit

Resumo do conteúdo contido na página número 3

PS-CF-01 TROUBLESHOOTING SUGGESTIONS 3. Connect second PS-CF-01 media converter to terminal equipment through copper cable. If a Media Converter fails, ask the following questions: 1. Is the Power LED on the media converter illuminated? UTP to RJ-45 Connector: NO If connecting to RJ-45 connector on terminal equipment (as on • Is the power adapter the proper voltage and cycle frequency front of PowerStar™ III or PowerStar™ IV): for the AC outlet? NOTE: Refer to the “Power Supply Requirements” on

Resumo do conteúdo contido na página número 4

Fiber UTP/STP Fiber UTP/STP Fiber UTP/STP PS-CF-01 NOTE: DEVICES INSTALLED AT MAXIMUM DISTANCES MAY NOT FUNCTION RELIABLY DUE TO LIMITATIONS IMPOSED BY HOST TIME-OUTS AND/OR BY TERMINAL EQUIPMENT TIME-OUTS. up to 762 meters up to 762 meters AS/400 Multimode up to 2 kilometers S/3x Singlemode up to 8 kilometers or 5x94 PowerStar™ III PowerStar™ IV RJ-45 copper/balun 3 connection to Twinax connector at PowerStar™ up to 762 meters III back OR to Twinax up to 762 meters SIC at PowerStar™ IV bac