Resumo do conteúdo contido na página número 1
PW-6000
Intelligent Controller
Installation and Configuration Guide
Part Number: PW6K1IC
July 2007 © 2007 Honeywell. All rights reserved. 800-00005
Resumo do conteúdo contido na página número 2
Copyright© 2007 Honeywell. All rights reserved. All product and brand names are the service marks, trademarks, registered trademarks, or registered service marks of their respective owners. Printed in the United States of America. Honeywell reserves the right to change any information in this document at any time without prior notice. Microsoft and Windows are registered trademarks of Microsoft Corporation. Windows Server is a trademark of Microsoft Corporation. Ordering Information Please c
Resumo do conteúdo contido na página número 3
Resumo do conteúdo contido na página número 4
CONTENTS Notices................................................................................................................... 1 Warnings and Cautions .................................................................................. 1 Damage During Shipment .............................................................................. 2 Electro Static Discharge ................................................................................. 2 Disclaimer – Product Liability; Mutual Indemni
Resumo do conteúdo contido na página número 5
LIST OF FIGURES Figure 1: PW-6000 Connections, LEDs, and DIP Switches ..............................7 Figure 2: PW-6000 Power Terminals ............................................................... 13 Figure 3: PW-6000 Port Wiring ....................................................................... 14 Figure 4: PW-6000 TMP and FLT Terminals .................................................. 14 Figure 5: PW-6000 Web Server Login Screen ................................................. 15 Fig
Resumo do conteúdo contido na página número 6
LIST OF TABLES Table 1 PW-6000 Jumper Settings .................................................................. 8 Table 2 PW-6000 DIP Switch Settings ............................................................ 9 Table 3 PW-6000 Technical Specifications ................................................... 11 Table 4 PW-6000 Status LED Combinations During Initialization .............. 12 Table 5 PW-6000 Status LED Combinations During Run Time ................... 13 PW-6000 Installation and Confi
Resumo do conteúdo contido na página número 7
viii www.honeywell.com
Resumo do conteúdo contido na página número 8
PW-6000 Installation 1 Notices 1.1 Warnings and Cautions Before Installation Warning: Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power supply, verify that the output voltage is within specifications of the power supply (see 'Technical Specifications' on page 11). Do not apply power to the system until after the installation has been completed. Personal injury or death can occur, and the equipment can b
Resumo do conteúdo contido na página número 9
PW-6000 Installation Notices Earth Grounding Warning: EARTH ground all enclosures for proper installation. Use Suppressors Warning: Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell Integrated Security, Inc. recommends only DC strikes. 1.2 Damage During Shipment Caution: IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST BE FILED WITH THE COMMERCIAL CARRIER RESPONSIBLE FOR THE DAMAGE. 1.3 Electro Static Discharge Caution: Electro-static discharge (E
Resumo do conteúdo contido na página número 10
PW-6000 Installation Notices 1.4 Disclaimer – Product Liability; Mutual Indemnification If a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to the property of others, Customer shall immediately notify Honeywell Integrated Security in writing of all such claims. Honeywell Integrated Security shall defend or settle such claims and shall indemnify and hold Customer harmless for any costs or damages including reasonable attorneys’ fees w
Resumo do conteúdo contido na página número 11
PW-6000 Installation Notices Show the RMA number on all packages shipped. Packages, which are not marked with an RMA number will be refused at the factory and returned to you COD. Carefully pack the equipment for shipment. Use the original packing material whenever possible 1.7 Limited Warranty All Products sold or licensed by Honeywell Integrated Security include a warranty registration card which must be completed and returned to Honeywell Integrated Security by or on behalf of the end
Resumo do conteúdo contido na página número 12
PW-6000 Installation Product Overview Customer shall not copy the design of any of the Products or use or cause to be used any Product design or related materials for its own benefit or for the benefit of any other party. The covenants contained in this section shall remain effective throughout the term of this Agreement and thereafter unless specifically waived by Honeywell Integrated Security in writing. 2 Product Overview The Intelligent Controller is the heart of the PW-6000 and provid
Resumo do conteúdo contido na página número 13
PW-6000 Installation Product Overview 2.3 Other • An on-board real time clock maintains the date and time, taking into account leap year and accounting for global time zones and daylight savings time changes. • The database for the system configuration and card holders are stored in FLASH memory. • The event log buffer is stored in battery-backed memory. • Configuration data and event/status reports are communicated to the host via on-board 10-BaseT/100Base-TX Ethernet port or Port 1. •
Resumo do conteúdo contido na página número 14
PW-6000 Installation Product Overview Figure 1: PW-6000 Connections, LEDs, and DIP Switches PW-6000 Installation Guide, Document 800-00005, Revision A 7
Resumo do conteúdo contido na página número 15
PW-6000 Installation Setting Up the PW-6000 Hardware 3 Setting Up the PW-6000 Hardware The PW-6000 processor is configured with 12 jumpers and a set of 4 DIP switches. These jumpers/switches set up the port interface, end of line termination, and operating mode configuration. Refer to the tables below to set the jumpers as required. 3.1 Setting the Jumpers Table 1 PW-6000 Jumper Settings Set At Description Jumpers J1 N/A 10Base-T/100Base-TX Ethernet Connection (Port 0) J2 N/A Factory Use On
Resumo do conteúdo contido na página número 16
PW-6000 Installation Setting Up the PW-6000 Hardware 3.2 Setting the DIP Switches Dual In-line Package (DIP) switches are read when the system powers up, except where noted otherwise. The following table shows the setting options. Table 2 PW-6000 DIP Switch Settings S2 S3 S4 Selection S1 OFF OFF OFF OFF Normal Operating Mode. ON OFF OFF OFF When DIP switch 1 is ON, Port 0 communicates with the web browser. Port 1 is used for RS-232/485 communications. After the panel initialization, enabl
Resumo do conteúdo contido na página número 17
PW-6000 Installation Setting Up the PW-6000 Hardware The PW-6000 DIP switches need to be set twice: 1. Configure the S4-S3-S2-S1 DIP switches to off-off-on-off to set the default TCP/IP address to 192.168.0.251. 2. Apply power to the panel to set the IP address. 3. Change the S4-S3-S2-S1 combination to off-off-off-on.(DIP switch 1 is “read on the fly”). This sets the login to the default user ID (“admin”) and password (“password”) for Ethernet communications. 4. Create users. See 'User Conf
Resumo do conteúdo contido na página número 18
PW-6000 Installation Setting Up the PW-6000 Hardware 3.3 Technical Specifications Table 3 PW-6000 Technical Specifications Description Category WARNING: PW-6000 is manufactured for use in low-voltage, Class 2 circuits only. 12Vdc ± 10%, 300mA maximum. Primary Power 12Vdc @ 240mA (325mA with CoBox-Micro) nominal. 3Volts Lithium, type BR2325, BR2330, CR2330. Memory and Clock Backup Port 0 10Base-T/100Base-TX Ethernet. Ports Port 1 RS-232 or 2-wire RS-485: 9,600 to 115,200 bps, async. An optio
Resumo do conteúdo contido na página número 19
PW-6000 Installation Setting Up the PW-6000 Hardware Caution: Locate the power source as close to this board as possible. Connect power with minimum of 18AWG wires. Note: POLARITY for 12 VDC power is important. Make sure the +12 VDC is connected to the terminal labeled +12V and the return is connected to the terminal labeled GND. 3.4 Status LEDs The PW-6000 uses six on-board LEDs to provide status information during its initialization sequence and normal run-time operation. Initialization
Resumo do conteúdo contido na página número 20
PW-6000 Installation Setting Up the PW-6000 Hardware Run TimeSupplying Power to the PW-6000 Interface Table 5 PW-6000 Status LED Combinations During Run Time Description LED 1 Off-Line / On-Line and Battery Status Off-Line = 20% On, ON-Line = 80% On Double Flash means the Battery is Low 2 Primary Host Communication Activity (Ethernet or Port 1) 3 Port 2 Communication Activity 4 Port 3 Communication Activity 5 ON = Writing to Flash Memory. Do NOT cut off power when this LED is ON. 6TBD SPD On-
