Manual do usuário Cisco Systems Wireless-G Bridge WBP54G

Resumo do conteúdo contido na página número 1

Set up and Connect the Bridge
1
®
A Division of Cisco Systems, Inc.
The Setup Wizard will guide you E You will use the PC running H A list of all Bridges for Phone
through the steps to configure this Setup Wizard to set up Adapters that can be
and connect the Bridge. the Bridge. Disconnect the detected by the Setup
power jack from the back of Wizard will be displayed.
A Insert the Setup CD-ROM the Linksys phone adapter Select the Bridge you are
into your CD-ROM drive. The or IP phone. (You

Resumo do conteúdo contido na página número 2

P Connect the power cable WPA If the attempt fails, you enter a Passphrase, enter of the Bridge to the Power have two options offered by the WEP key and select the port of the phone adapter TKIP is automatically a pop-up screen. Click Yes appropriate number from or IP phone. Then connect selected as the encryption to save the new settings the Key Index drop-down the power adapter to an method. Enter a and proceed, or click No to menu. Click Next. electrical outlet. Passphrase, als