Manual do usuário ZyXEL Communications Access Router P-660R-T

Resumo do conteúdo contido na página número 1

P-660R-T Series
ADSL2+ Access Router
Quick Start Guide
Version 3.40
9/2005

Resumo do conteúdo contido na página número 2

P-660R-T Series Quick Start Guide Overview The Prestige 660R-T (P-660R-T) ADSL2+ access router is the ideal device for small networks connecting to the Internet via ADSL. See your User’s Guide for background information on all features. 1 Hardware Connections If you prefer to see a multi-media animation of how to make hardware connections, see the included CD. 1DSL: Connect the Prestige to a telephone jack using a telephone wire. 2LAN: Use an Ethernet cable to connect a computer to the LAN p

Resumo do conteúdo contido na página número 3

P-660R-T Series Quick Start Guide • Zero Configuration • Web Configurator Internet Access Wizard Note: Configuration genie or Zero configuration are only able to configure the device automatically for Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address from your ISP. If you’re not using these Internet access settings, then use the Web Configurator Internet Access Wizard to manually configure the device. You will need your Interne

Resumo do conteúdo contido na página número 4

P-660R-T Series Quick Start Guide 2.3 Web Configurator Internet Access Wizard 2.3.1 Accessing the Web Configurator 1 Launch your web browser. Enter “192.168.1.1” as the web site address. Note: If you do not see the next screens, then please read Section 4.1 on page 8. 2 Click Login. 3 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main web configurator screen. 4 In the Site Map screen, click Wizard Setup. 4

Resumo do conteúdo contido na página número 5

P-660R-T Series Quick Start Guide 2.3.2 Internet Access Setup 1 Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and Encapsulation you chose in the first wizard screen. Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If not given, leave the fields set to the default. RFC 1483 A) Select Routing if your ISP gave you an IP address and allows multiple computers to share an A Internet account.

Resumo do conteúdo contido na página número 6

P-660R-T Series Quick Start Guide PPPoE A) Select Routing, then PPPoE. B) Click Next. A C) Enter the service name, username and password C given by your ISP. D) If your ISP gave you an IP address, select Static IP D address and enter it. Otherwise, select Obtain an B IP Address Automatically. E E) Select Nailed-Up Connection to have your F connection up all the time. G Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle Timeout field.

Resumo do conteúdo contido na página número 7

P-660R-T Series Quick Start Guide Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle Timeout field. F) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT. G) Click Next. 2 Verify your LAN and WAN settings and click Save Settings. 3 The Prestige automatically tests the connection to the computer(s) connected to th

Resumo do conteúdo contido na página número 8

P-660R-T Series Quick Start Guide 4 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on Make sure that you have the correct power adaptor connected to the Prestige, it is when you connect the plugged into an appropriate power source and the Prestige is turned on. Prestige’s power. Check all cable connections. If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact your local vendor. Cannot access the Check the cable connection from yo

Resumo do conteúdo contido na página número 9

P-660R-T Series Quick Start Guide 4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties. 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window. 8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 9 Close the Ne