Resumo do conteúdo contido na página número 1
CL-110/CL-110-I ADSL2+ Router
User’s Manual
Rev: 1.4
2006/02/09
No part of this publication may be reproduced in any form by any means without the prior written permission. Other
trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
This manual currently suits for CL-110/CL-110-I.
Resumo do conteúdo contido na página número 2
Safety Notes Use only the type of power source indicated on the marking labels. For Installation Use only power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operati
Resumo do conteúdo contido na página número 3
ADSL Router User Manual FCC FCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed t
Resumo do conteúdo contido na página número 4
Preface Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL2+) Router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL2+ allows you to have both voice and data services in use simultaneously all over one phone line. CL-110/CL-110-I ADSL2+ Router is a DSL broadband access device which allows ADSL2+ connectivity capabilities for home or office users. It supports ADSL2/ADSL2+ and is backward compatible to ADSL, even
Resumo do conteúdo contido na página número 5
ADSL Router User Manual RFC2684 LLC Encapsulation and VC Multiplexing over AAL5 RFC2364 Point-to-Point Protocol (PPP) over AAL5 RFC2225 Classical IP and ARP over ATM RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding and Client functions) Support PPPoA or PPPoE Bridged mode (the IP address got from ISP can be passed to the user’s PC and behave as the IP address of the user’s PC.) OAM F4/F5 End-to-End/Segment Loopback Cells Bridging Features Supports self-learning br
Resumo do conteúdo contido na página número 6
Firmware upgrades through HTTP, TFTP, or FTP The boot loader contains very simple web page to allow the users to update the run-time firmware image. Configuration file backup and restore SNMPv1/v2 agent with MIB-II, ADSL Line MIB Unpacking Check the contents of the package against the pack contents checklist below. If any of the items is missing, then contact the dealer from whom the equipment was purchased. ADSL Router Power Adapter and Cord RJ-11 ADSL Line Cable RJ-45 Ethe
Resumo do conteúdo contido na página número 7
ADSL Router User Manual Subscription for ADSL Service To use the ADSL Router, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be given an Internet account with username and password. You will get a dynamic IP by dialing up to your ISP. Static IP address: If you apply for full-time connectivity, you may get either one stati
Resumo do conteúdo contido na página número 8
Resumo do conteúdo contido na página número 9
Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front panel of the ADSL Router (with USB interface and without USB interface): LED Indicators The ADSL Router is equipped with five LEDs on the front panel as described in the table below (fr
Resumo do conteúdo contido na página número 10
Rear Panel The following figures illustrate the rear panel of your ADSL Router. 9 VAC Connector Description 9 VAC Power connector 9VAC Power switch Ethernet Ethernet RJ-45 connector USB USB connector (for the model with USB interface only) DSL RJ-11 connector
Resumo do conteúdo contido na página número 11
Chapter 2:System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the ADSL Router via Ethernet, the host computer must meet the following requirements: With Ethernet network interface. Must have TCP/IP installed. Set client PC with obtain an IP address automatically or set fix IP address. With a web browser installed: Internet Explorer 5.x or later. The ADSL Router is configured with the default IP address of 192.168.1.1 and s
Resumo do conteúdo contido na página número 12
Connecting the ADSL Router Follow the steps below to connect the related devices. Connecting the ADSL line. Connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router. Connect the other end of the cable to the Ethernet port of the client PC. Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power outlet.
Resumo do conteúdo contido na página número 13
Chapter 3: Configuration For connecting through a hub, please refer to the following diagram for an example. 9 VAC Install the USB Driver For Windows ME Run the USB installation program from the CD provided by your device package. An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB dev
Resumo do conteúdo contido na página número 14
An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC.
Resumo do conteúdo contido na página número 15
Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. Now, the system will copy the proper files for this device. When the file copying finished, the dialog above will close. The InstallShield Wizard Complete appears, click Finish. Now the USB driver is installed properly. You can use the device. For Windows XP Run the US
Resumo do conteúdo contido na página número 16
When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically.
Resumo do conteúdo contido na página número 17
Chapter 3: Configuration The system is trying to find proper driver for your device and copying the files automatically. After the file copying is finished, a completing message will appear. You can use the device now. Uninstall the USB Driver For Windows ME For uninstall the USB driver, please do the following. The first way: Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear. A
Resumo do conteúdo contido na página número 18
For Windows 2000 For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC.
Resumo do conteúdo contido na página número 19
Chapter 3: Configuration When the Unsafe Removal of Device screen appears, the USB driver is removed successfully. Click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish.
Resumo do conteúdo contido na página número 20
The second way: Choose Settings –Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove.
