Manual do usuário Patton electronic OnSite 07MOS10xx-QS

Resumo do conteúdo contido na página número 1

OnSite 1052 & 1063 Series
Metro-Optical Transport Access
Nodes
Quick Start Guide
Sales Office: +1 (301) 975-1000
Part Number: 07MOS10xx-QS, Rev. A Technical Support: +1 (301) 975-1007
E-mail: support@patton.com
Revised: November 19, 2009
WWW: www.patton.com

Resumo do conteúdo contido na página número 2

Read the safety information in the OnSite Series Getting Started Guide and Administrator’s Reference Guide thoroughly before installing and operating your OS-10 Series system. Failure to follow this safety infor- mation can lead to personal injury or damage to the equipment. WARNING 1.0 Unpacking and Installation 1. Check the contents of the shipping container and accessories box or bag against the content list and the packing slip. Verify that you received all

Resumo do conteúdo contido na página número 3

3.0 Accessing and Configuring the System To access the system management functions for the first time, your may use either the SERIAL or the Ethernet LAN management port. Refer to the Installation and Operation Guide for access through the SERIAL port. For first time access through the Ethernet LAN management port, follow these steps: 1. Connect a PC to the Ethernet LAN management port using the RJ-45 connector. 2. Configure the PC to connect to the OS-10 Seri

Resumo do conteúdo contido na página número 4

3.2 Saving the System Configuration To save the system configuration to the flash memory, follow these steps: 1. Select the SYSTEM folder from the OnSight DM web-based GUI navigation menu. 2. From the expanded SYSTEM folder, select the Actions folder. 3. From the expanded Actions folder, select Save Configuration. A warning window opens to alert you to the start of the save-configuration process. Click on OK to continue or Cancel to cancel the request. 4.