Resumo do conteúdo contido na página número 1
Greenstar Highflow 440
FLOOR STANDING RSF GAS-FIRED COMBINATION BOILER
FOR SEALED CENTRAL HEATING SYSTEMS AND MAINS FED DOMESTIC HOT WATER
THIS APPLIANCE IS FOR USE WITH
NATURAL GAS OR LPG (Cat II 2H3P TYPE C13 & C33)
NATURAL GAS: 47 311 82
LIQUID PETROLEUM GAS: 47 311 83
GB/IE
USER INSTRUCTIONS &
CUSTOMER CARE GUIDE
Resumo do conteúdo contido na página número 2
USER INSTRUCTIONS & CUSTOMER CONTACT INFORMATION CARE GUIDE WORCESTER BOSCH: PLEASE READ THESE INSTRUCTIONS TECHNICAL: 08705 266241 CAREFULLY BEFORE OPERATING YOUR SERVICE: 08547 256206 APPLIANCE SPARES: 01905 752571 THESE INSTRUCTIONS ARE APPLICABLE TO THE WORCESTER BOSCH APPLIANCE LITERATURE: 01905 752556 MODEL(S) STATED ON THE FRONT COVER OF TRAINING: 01905 752526 THIS MANUAL ONLY AND MUST NOT BE USED WITH ANY OTHER MAKE OR MODEL OF SALES: 01905 752640 APPLIANCE WEBSITE: www.worcester-bosch.
Resumo do conteúdo contido na página número 3
CONTENTS INTRODUCTION EXCELLENCE COMES AS STANDARD 2 SAFETY PRECAUTIONS 3 GENERAL NOTES 4 Boiler location and clearances 6 USING YOUR APPLIANCE CONTROLS 7 OPERATING THE APPLIANCE Switching the appliance on/off 8 Setting the central heating temperature 8 Controlling central heating 8 Setting the hot water temperature 9 Summer mode, hot water only 10 Frost protection 10 Fault condition 10 ENERGY SAVING TIPS ON ENERGY SAVING 11 MAINTENANCE MAINTAINING YOUR APPLIANCE 14 FAULT FINDING 15 FAULT OR BRE
Resumo do conteúdo contido na página número 4
EXCELLENCE COMES AS STANDARD Thank you for purchasing a Greenstar Highflow 440 gas-fired condensing boiler manufactured by Worcester Bosch. The company prides itself on manufacturing boilers to the strictest quality control standards throughout every stage of production. Worcester Bosch has led the field in innovative appliance design and performance for more than 40 years This heritage means all products are of exceptional quality and proven reliability. The Greenstar range in particular, is
Resumo do conteúdo contido na página número 5
SAFETY PRECAUTIONS IF YOU SMELL GAS: COMBUSTIBLE AND CORROSIVE MATERIALS DO NOT operate any electrical switches Do not store or use any combustible materials (paper, thinners, paints etc.) inside or within the Extinguish any naked flame vicinity of the appliance Turn off the gas service cock at the meter Chemically aggressive substances, such as Open windows and doors halogenated hydrocarbons containing chlorine or fluorine compounds can corrode the Telephone your gas company appliance and inval
Resumo do conteúdo contido na página número 6
GENERAL NOTES To get the best from your appliance please read CONDENSATE DRAIN these instructions carefully The appliance also produces quantities of SEALED HEATING SYSTEMS condensate which is discharged regularly by a pump within the boiler to drain. The appliance is fitted to a sealed heating system which is pressurised. Your installer will tell you of the minimum and maximum pressure ROOM THERMOSTAT which must be indicated on the pressure A room temperature controller (eg. Worcester gauge. TR
Resumo do conteúdo contido na página número 7
GENERAL NOTES HOT AND COLD FLOW PUMP The flow of water demanded from both hot and The pump is set by the manufacturer and must cold service outlets is dependent on the mains not be adjusted. supply, it may not be possible in some installations to operate all outlets PUMP ANTI-SEIZURE simultaneously. If there has been no heating demand for 24 hours, the pump will run for a few seconds to WATER MAINS FAILURE reduce the possibility of pump seizure, which is If there is a failure of the mains water
Resumo do conteúdo contido na página número 8
GENERAL NOTES Fig. a. BOILER LOCATION AND CLEARANCES This boiler is only suitable for installing internally within a property at a suitable location onto a fixed, rigid non-combustable surface at least the same size of the boiler and capable of supporting the boiler weight. Compartments: Follow the requirements of BS6798 and BS5440 Part 2 and note: Fig. b. Minimum clearances must be maintained. An access door is required for servicing and maintenance of the boiler. If fitting the boiler into an
Resumo do conteúdo contido na página número 9
1. LIFT CONTROLS 1 23 4 5 6 7 1. INDICATOR LAMP FOR “OFF/ON” 2. “INSTALLER SERVICE FUNCTION” BUTTON (For use only by service engineer) 3. RESET BUTTON 4. DISPLAY 5. SERVICE BUTTON 6. “ECO” MODE INDICATOR 7. INDICATOR LAMP FOR “BURNER ON” 9 10 8 8. MASTER SWITCH 9. CENTRAL HEATING TEMPERATURE CONTROL 10. HOT WATER TEMPERATURE CONTROL 11. SYSTEM PRESSURE GAUGE 12. FILLING LOOP CONNECTION 11 REMOVE THE BOILER CASING FRONT PANEL TO GAIN ACCESS TO THE SYSTEM PRESSURE GAUGE & FILLING LOOP CONNECTION
Resumo do conteúdo contido na página número 10
OPERATING THE APPLIANCE SWITCHING THE APPLIANCE ON/OFF Switching on Switch on the appliance at the master switch (I). The indicator lamp shows green and the display will show the central heating flow temperature, when the appliance is operating in the central heating mode. Note: If the display alternates between -II- & the central heating flow temperature, the condensate trap filling programme is active. If the display shows “t” the tank heat up programme is running. The condensate trap fillin
Resumo do conteúdo contido na página número 11
OPERATING THE APPLIANCE SETTING THE HOT WATER TEMPERATURE Hot water temperature The hot water temperature can be set to between approx. 45°C and 65°C using the temperature control The domestic hot water temperature is not shown on the display. Control Setting Water Temperature Anti-clockwise limit approx. 45°C ● approx. 58°C Clockwise limit approx. 65°C “ECO” indicator ECO A lit indicator shows there is no DHW demand from the integral or external programmer and indicates a night time set
Resumo do conteúdo contido na página número 12
OPERATING THE APPLIANCE SUMMER MODE, HOT WATER ONLY With room temperature controller fitted Turn temperature control on the appliance anti-clockwise as far as the stop. The central heating is now turned off. The hot water function and the power supply for the programmer and thermostat remain switched on. FROST PROTECTION Leave master switch switched on. If the temperature falls to 5°C the boiler will fire to avoid the possibility of freezing. Add a suitable anti-freeze fluid to the water
Resumo do conteúdo contido na página número 13
TIPS ON ENERGY SAVING Heating economically The boiler is designed to provide a high level of comfort while keeping gas consumption and the resulting environmental effect as low as possible. The gas supply to the burner is controlled according to the level of demand for heat. The boiler continues to operate with a low flame if the demand for heat reduces. The technical term for this process is modulating control. Modulating control reduces temperature fluctuations and provides even distribution o
Resumo do conteúdo contido na página número 14
TIPS ON ENERGY SAVING Roof insulation Around 30% of the heat loss from a property is through the roof. Replace any old insulation with new insulation, preferably of around 200mm thickness or more. Window frames Single glazed windows, particularly those with steel frames, can lose a great deal of heat. Consideration should be given to replacement with PVCu or wooden framed double glazed units. Curtains Lined curtains, or heavier full length curtains can provide excellent insulation. However, alwa
Resumo do conteúdo contido na página número 15
TIPS ON ENERGY SAVING Radiators More often than not radiators will be sited underneath a window, so the warm air from the radiator heats the colder incoming air from the window. The performance of the radiator will be affected if the curtains are allowed to drape over the radiator or shelves are fitted above it. The positioning of furniture and tables in front of the radiator should also be avoided. It is advisable to manually adjust all radiator valves every 2-3 months to prevent them from stic
Resumo do conteúdo contido na página número 16
MAINTAINING YOUR APPLIANCE Your new Greenstar Highflow 440 gas-fired appliance represents a long term investment in a reliable, high quality product. In order to realise its maximum working life, and to ensure it continues to operate at peak efficiency and performance, it is essential that your boiler receives regular, servicing and maintenance checks from a competent person beyond the initial 2 year guarantee period. If you would like to know more about a Worcester Bosch service contract, pleas
Resumo do conteúdo contido na página número 17
FAULT FINDING Problem Cause Remedy Desired room Thermostatic radiator Increase thermostatic temperature is not valve(s) set too low radiator valve setting(s) reached Temperature control for Increase CH flow CH flow on boiler set too temperature control low setting Air trapped in heating Bleed radiators and system recharge heating system Desired room Radiators are too hot Turn down thermostatic temperature exceeded by radiator valves / room stat large amount Temperature rises Clock is incorrectly
Resumo do conteúdo contido na página número 18
FAULT OR BREAKDOWN This appliance is supported in the UK by Worcester Heat Systems Ltd. - part of the Bosch Group. Specialist factory trained Service Engineers are available to attend a breakdown occurring on this appliance. No charge will be made for parts and/or labour providing: An appliance fault is found and the appliance has been installed within the past 24 months. Reasonable evidence of this must be supplied on request. A call-out charge will be made where: The appliance has been instal
Resumo do conteúdo contido na página número 19
YOUR GUARANTEE This appliance is guaranteed against faulty material or workmanship for a period of 24 calendar months from the date of installation subject to the following terms and conditions. During the period of this guarantee any components of the unit which are proven to be faulty or defective in manufacture will be exchanged or repaired free of charge by Worcester Heat Systems Ltd. The householder may be asked to prove the date of installation, that the appliance was correctly commi
Resumo do conteúdo contido na página número 20
GUARANTEE REGISTRATION You should complete and return the postpaid Guarantee Registration Card within 14 days of purchase. Returning the card will register you as the owner of your new Greenstar Highflow 440 appliance and will assist us in maintaining an effective and efficient customer service by establishing a reference and permanent record for your boiler. This does not affect your statutory rights. For your own record: Model Serial No. (See identity label inside appliance casing) Type / size
