Resumo do conteúdo contido na página número 1
H9 ADJUSTABLE SPEED DRIVE
Installation and Operation
Manual
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
H9 ADJUSTABLE SPEED DRIVE Installation and Operation Manual Document Number: 58682-000 Date: February, 2008
Resumo do conteúdo contido na página número 4
Introduction 2 Congratulations on the purchase of the new H9 True Torque Control Adjustable Speed Drive (ASD). 2 The H9 True Torque Control Adjustable Speed Drive is a solid-state AC drive that features True 2 Torque Control . Toshiba’s Vector Control Algorithm enables the motor to develop high starting torque and provide compensation for motor slip, which results in smooth, quick starts and highly efficient operation. The H9 ASD uses digitally-controlled pulse width modulation. The programm
Resumo do conteúdo contido na página número 5
About This Manual This manual was written by the Toshiba Technical Publications Group. This group is tasked with providing technical documentation for the H9 Adjustable Speed Drive. Every effort has been made to provide accurate and concise information to you, our customer. At Toshiba we are continuously searching for better ways to meet the constantly changing needs of our customers. E-mail your comments, questions, or concerns about this publication to Technical-Publications-Dept@TIC.TOSH
Resumo do conteúdo contido na página número 6
Contacting Toshiba’s Customer Support Center Toshiba’s Customer Support Center can be contacted to obtain help in resolving any Adjustable Speed Drive system problem that you may experience or to provide application information. The center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Support Center’s toll free number is US (800) 231-1412/Fax (713) 466-8773 — Canada (800) 527-1204. You may also contact Toshiba by writing to: Toshiba International Corporation 13131 West Littl
Resumo do conteúdo contido na página número 7
Table of Contents General Safety Information.............................................................................................. 1 Safety Alert Symbol..................................................................................................... 1 Signal Words ................................................................................................................ 1 Special Symbols ............................................................................................
Resumo do conteúdo contido na página número 8
Electronic Operator Interface ........................................................................................ 28 EOI Operation ............................................................................................................28 EOI Remote Mounting............................................................................................... 28 EOI Features............................................................................................................... 29 LED Disp
Resumo do conteúdo contido na página número 9
General Safety Information DO NOT attempt to install, operate, maintain or dispose of this equipment until you have read and understood all of the product safety information and directions that are contained in this manual. Safety Alert Symbol The Safety Alert Symbol indicates that a potential personal injury hazard exists. The symbol is comprised of an equilateral triangle enclosing an exclamation mark. Signal Words Listed below are the signal words that are used throughout this manual follow
Resumo do conteúdo contido na página número 10
Special Symbols To identify special hazards, other symbols may appear in conjunction with the DANGER, WARNING and CAUTION signal words. These symbols indicate areas that require special and/or strict adherence to the procedures to prevent serious injury to personnel or death. Electrical Hazard Symbol A symbol which indicates a hazard of injury from electrical shock or burn. It is comprised of an equilateral triangle enclosing a lightning bolt. Explosion Hazard Symbol A symbol which indicates
Resumo do conteúdo contido na página número 11
Equipment Inspection � Upon receipt of the equipment inspect the packaging and equipment for shipping damage. � Carefully unpack the equipment and check for parts that were damaged during shipping, missing parts, or concealed damage. If any discrepancies are discovered, it should be noted with the carrier prior to accepting the shipment, if possible. File a claim with the carrier if necessary and immediately notify your Toshiba sales representative. � DO NOT install or energize equipment that
Resumo do conteúdo contido na página número 12
Installation Precautions Location and Ambient Requirements � The Toshiba H9 ASD is intended for permanent installations only. � Installation should conform to the 2005 National Electrical Code — Article 110 (NEC) (Requirements For Electrical Installations), all regulations of the Occupational Safety and Health Administration, and any other applicable national, regional, or industry codes and standards. � Select a mounting location that is easily accessible, has adequate personnel working spac
Resumo do conteúdo contido na página número 13
Conductor Routing and Grounding WARNING � Use separate metal conduits for routing the input power, output power, and control circuits and each shall have its own ground cable. � A separate ground cable should be run inside the conduit with the input power, output power, and and control circuits. � DO NOT connect CC to earth ground. �Use IICC terminal as the return for the V/I input. � Always ground the unit to prevent electrical shock and to help reduce electrical noise. � It is the responsibi
Resumo do conteúdo contido na página número 14
Power Connections DANGER Contact With Energized Wiring Will Cause Severe Injury Or Death. � Turn off, lockout, and tag out all power sources before connecting the power wiring to the equipment. � After ensuring that all power sources are turned off and isolated in accordance with established lockout/tag out procedures, connect three-phase power source wiring of the correct voltage to the correct input terminals and connect the output terminals to a motor of the correct voltage and type for t
Resumo do conteúdo contido na página número 15
System Integration Precautions The following precautions are provided as general guidelines for the setup of the H9 ASD within the system. � The Toshiba H9 ASD is a general-purpose product. It is a system component only and the system design should take this into consideration. Please contact your Toshiba sales representative for application-specific information or for training support. � The Toshiba H9 ASD is part of a larger system and the safe operation of the H9 ASD will depend on observ
Resumo do conteúdo contido na página número 16
System Setup Requirements � When using the H9 ASD as an integral part of a larger system, it is the responsibility of the H9 ASD installer or maintenance personnel to ensure that there is a fail-safe in place, i.e., an arrangement designed to switch the system to a safe condition if there is a fault or failure. � System safety features should be employed and designed into the integrated system in a manner such that system operation, even in the event of system failure, will not cause harm or
Resumo do conteúdo contido na página número 17
Operational and Maintenance Precautions WARNING � Turn off, lockout, and tag out the main power, the control power, and instrumentation connections before inspecting or servicing the drive, or opening the door of the enclosure. � Turn off, lockout, and tag out the main power, the control power, and instrumentation connections before proceeding to disconnect or connect the power wiring to the equipment. � The capacitors of the H9 ASD maintain a residual charge for a period of time after turnin
Resumo do conteúdo contido na página número 18
Motor Characteristics Listed below are some variable speed AC motor control concepts with which the user of the H9 Adjustable Speed Drive should become familiar. Motor Autotuning Motor production methods may cause minor differences in the motor operation. The negative effects of these differences may be minimized by using the Autotune feature of the H9 ASD. Autotuning is a function of the H9 ASD that measures several parameters of the connected motor and places these readings in a stored tab
Resumo do conteúdo contido na página número 19
Power Factor Correction DO NOT connect a power factor correction capacitor or surge absorber to the output of the H9 ASD. If the ASD is used with a motor that is equipped with a capacitor for power factor correction, remove the capacitor from the motor. Connecting either of these devices to the output of the ASD may cause the ASD to malfunction and trip, or the output device may cause an over-current condition resulting in damage to the device or the ASD. Light Load Conditions When a motor is
Resumo do conteúdo contido na página número 20
Load-produced Negative Torque When the H9 ASD is used with a load that produces negative torque (an overhauling load), the over- voltage or over-current protective functions of the ASD may cause nuisance tripping. To minimize the undesirable effects of negative torque the dynamic braking system may be used. The dynamic braking system converts the regenerated energy into heat that is dissipated using a braking resistor. The braking resistor must be suitably matched to the load. Dynamic braking
