Resumo do conteúdo contido na página número 1
DUAL MIC DUAL MIC IC
USER MANUAL
American
English Version
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
BlueAnt V1 USER GUIDE Introduction The revolutionary BlueAnt V1 voice controlled portable headset marks the future of voice controlled Bluetooth devices. Its voice activated ‘prompt and response’ interface combined with the BlueAnt Voice Isolation Technology™ software, provide the BlueAnt V1 with high quality and easy to use voice communications. Its dual microphones provide clear and clean voice input enabling superb Noise Suppression, Echo Cancellation and Wind Noise Reduction. Your headset
Resumo do conteúdo contido na página número 4
BlueAnt Features of the BlueAnt V1 • Voice Controlled user interface • Two microphones for pure speech • Voice Isolation Technology ™ BlueAnt’s revolutionary Digital Signal Processor (DSP) software • During a call, users can switch between two Voice Isolation modes – Standard and Max • This world class DSP provides echo suppression, noise reduction and wind noise reduction which separates the desired voice signal from background noise enabling crystal clear conversation in even the noisiest
Resumo do conteúdo contido na página número 5
BlueAnt What is Voice Control? Overview Voice control is the V1’s method of controlling actions on it or the phone it is connected to. With simple commands you can activate most of the headsets functions. To answer a call with your voice just say “Answer”, to reject a call say Volume Down “Ignore”. To “Call Home”, just say the words, it’s that simple. BAB To initiate a new Bluetooth connection with your phone, just (BlueAnt Button) say “Pair Me”. It’s that easy. The BlueAnt V1 listens to Y
Resumo do conteúdo contido na página número 6
BlueAnt Getting Started - Before you can use your headset, you must do the following: 1. Fully charge your headset until the red LED goes out, using one of the chargers provided. 2. Pair your headset with a Bluetooth enabled device, e.g. Cell phone, PDA, Computer Charging Your V1 comes with a built-in rechargeable battery. For fi rst time use, you must fully charge your V1. During charging, the indicator shows a steady red light. When the battery is fully charged, the red light will turn off. I
Resumo do conteúdo contido na página número 7
BlueAnt Charging the V1 with the Car Charger 1. Plug the car charger into your car’s cigarette lighter, and the gooseneck USB cable into the car charger 2. Plug the other end of the gooseneck USB charging cable into the charging port of your headset. Make sure the USB plug matches up to the USB socket on the headset. Do not force the plug into the socket it should slide in easily. The red LED will turn ON. 3. When charging is complete the red LED will turn OFF. Remove the charger Wearing the
Resumo do conteúdo contido na página número 8
BlueAnt Swapping and Fitting the Ear Gels and Comply™ Foam Tips The V1 comes with four different options for Ear gels. The larger rubber ear gel is fi tted on the unit already. When trying the different options, carefully pull the ear gel off and replace as per below. Rubber Gels Gently lift to remove. Gently press to attach. Push on fi rmly to click into place. Right Ear Left Ear The rubber ear gels should be placed so that the tip of the rubber is directed into your ear canal. In most cases th
Resumo do conteúdo contido na página número 9
BlueAnt Comply™ Foam Tips Gently pull to remove. Gently press to attach. Push on fi rmly to make sure of correct attachment. Note: The Foam tips will last for many months providing they are kept clean. We recommend carefully cleaning your ears before using these tips. Disclaimer: The warranty period for the Comply™ Foam tips is 3 months only. This warranty covers workmanship and defects but does not cover normal use and wear and tear. Compress the Comply Foam Tips™ around all sides by rol
Resumo do conteúdo contido na página número 10
BlueAnt VOICE CONTROL – “Say a command” Step 1: Press the BlueAnt Button (BAB), a voice prompt asks you to “Say a command” Step 2: Say one of the available commands such as “What Can I Say?”. A voice prompt responds and the headset makes the action. VOICE CONTROL - Getting the best results 1. After the “Say A Command” prompt, speak your command clearly. 2. If the headset does not respond immediately to your command, say it again. 3. Speak at a consistent speed and pronounce each syllable cl
Resumo do conteúdo contido na página número 11
BlueAnt VOICE CONTROL – Set up your Speed Dials There are two methods of inputting and activating the speed dials from your headset. The fi rst is to Set up the speed dialing in your phone. The second (used if your phone does not adhere to the Bluetooth specifi cation for Speed Dialling) is to input the numbers into the headset. We recommend to try the fi rst method fi rst. Speed Dials in the V1 Speed dials in the phone. To use effectively you are required to store the associated This method re
Resumo do conteúdo contido na página número 12
BlueAnt VOICE CONTROL – Available Commands The following is a comprehensive list of the commands available in the V1. At any time you can use the “What can I say?” command to hear the available commands Pair Me – Puts your V1 into pairing mode ready to connect with your phone. Follow the Prompts. Teach Me - This menu helps you to understand and use the V1 Try it Now – Takes you through a program which lets you practice the voice commands. Speed Dial Set Up – Assistance in how to s
Resumo do conteúdo contido na página número 13
BlueAnt Phone Commands – Triggers the Voice Dial function of your cell phone (If your phone supports voice dialing) Redial – Calls the number you last dialed Call Back – Calls the last received number Call Voice Mail – Calls your Voicemail Call Home – Calls your Home Call Offi ce – Calls your Offi ce Call Favorite – Dials your favorite number Call GOOG-411 – Connects you to the GOOG-411 service, see http:
Resumo do conteúdo contido na página número 14
BlueAnt VOICE CONTROL – Voice Answer On an incoming call the headset will announce the Caller ID. It will then ask you if you want to Answer or Ignore the Call Say “ANSWER” to accept the call OR “IGNORE” to reject the call Note : If the voice recognition in the V1 cannot understand you because of high noise or a loud ringtone coming from the phone, it will ask you to press the BAB once to answer or twice to Ignore the call. BUTTON OPERATION To Turn Voice Control ON or OFF Press and Hold
Resumo do conteúdo contido na página número 15
BlueAnt Pairing Procedure (This is an example only and may differ from your phone, but the process will be the same.) 1. First turn the phone OFF and then back ON again to refresh its memory. 2. Bring the mobile phone to about 30cm from the V1 Device. 3. Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary) 4. With the V1 OFF, Press and Hold the BAB for about 6 seconds. The LED will appear a solid Blue, and then will start fl ashing.
Resumo do conteúdo contido na página número 16
BlueAnt Basic Headset Functions For easy reference, also see the Button/Function Matrix and the Quick Start Guide. 1. Power ON: Press and Hold the BAB for 3 seconds. The solid Blue LED will light up. If the battery is low a solid Red LED will be displayed. After powering ON, your headset will automatically connect to your last used phone if it is in operating range. If this phone is not range, the V1 will enter idle mode after 60 seconds. If no phone has yet been Paired, it will enter the we
Resumo do conteúdo contido na página número 17
BlueAnt 11. Volume level: Click Volume or Volume during a call to adjust the desired level. Volume changes will be remembered for the next call. Be sure to use the headset at a comfortable and safe volume level. Note: Volume levels for Voice Prompts and Active calls are independent. 12. Mute/Unmute the microphone. Press and Hold Vol and Vol for 3 seconds during a call. Advanced Headset Functions 1. Disconnect / Transfer: To transfer the audio to the phone, Click Volume and Volume to
Resumo do conteúdo contido na página número 18
BlueAnt Standby Mode Button Function Matrix means connected to a device but not on a call. V1 Function Button Time Status Idle Mode Power ON/OFF BAB 3 Seconds From Off/Standby/Idle means the V1 is ON but not connected to any device Activate Voice Control BAB Click Idle/Standby Multiple Enter Pairing Mode BAB 6 Seconds From OFF button presses mean click together Answer Call BAB Click Ringing End Call BAB Double Click Active Call Reject Call BAB Double Click Ringing Redial Las
Resumo do conteúdo contido na página número 19
BlueAnt LED Indicator Chart Charging with Power ON Solid Red with a Purple Flash Power ON Solid Blue for 5 Seconds Charging Complete Red indicator OFF Power OFF Red fl ash 3 times Low Battery All LED’s change to Red Pairing Mode Blue fl ashing Idle Blue fl ash every 8 seconds Reset Blue fl ashing Standby 2 Blue fl ashes every 5 seconds Charging Solid Red Ongoing call NO LED’s Pairing your headset with multiple Bluetooth devices The V1 can be paired with 8 devices. If you want to connect to a previous
Resumo do conteúdo contido na página número 20
BlueAnt BlueAnt Voice Isolation Technology™ You can switch between two settings of Voice Isolation - STANDARD and MAX. Voice Isolation Standard - For use in normal everyday environments and gives you a natural sounding voice while removing mild noise. Voice Isolation Max - Gives you more intelligible voice in a wide variety of high noise environments. HOW DO I SWITCH? To switch between Standard and Max: Click the BAB while on a call • When switching between Standard and Max you will hear
